| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1394242997-32612-1-git-send-email-chase.southwood@yahoo.com>
Date: Fri, 7 Mar 2014 19:43:17 -0600
From: Chase Southwood <chase.southwood@...oo.com>
To: gregkh@...uxfoundation.org
Cc: abbotti@....co.uk, hsweeten@...ionengravers.com,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Chase Southwood <chase.southwood@...oo.com>
Subject: [PATCH v3 2/2] Staging: comedi: propagate timeout errors in s626.c
This patch for s626.c propagates the errors from the newly introduced
calls to comedi_timeout() as far as possible.
Signed-off-by: Chase Southwood <chase.southwood@...oo.com>
---
Compile tested.
2: This patch was introduced in v2 of this set.
3: Rebased on top of PATCH 1/2 edits.
drivers/staging/comedi/drivers/s626.c | 63 +++++++++++++++++++++++++----------
1 file changed, 45 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index fab8ccf..6518a4c 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -410,7 +410,7 @@ static int s626_send_dac_eoc(struct comedi_device *dev,
* channel 2. Assumes: (1) TSL2 slot records initialized, and (2)
* dacpol contains valid target image.
*/
-static void s626_send_dac(struct comedi_device *dev, uint32_t val)
+static int s626_send_dac(struct comedi_device *dev, uint32_t val)
{
struct s626_private *devpriv = dev->private;
int ret;
@@ -461,8 +461,10 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val)
*/
ret = comedi_timeout(dev, NULL, NULL, s626_send_dac_eoc,
s626_send_dac_wait_not_mc1_a2out);
- if (ret)
+ if (ret) {
comedi_error(dev, "DMA transfer timeout.");
+ return ret;
+ }
/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
@@ -484,8 +486,10 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val)
*/
ret = comedi_timeout(dev, NULL, NULL, s626_send_dac_eoc,
s626_send_dac_wait_ssr_af2_out);
- if (ret)
+ if (ret) {
comedi_error(dev, "TSL timeout waiting for slot 1 to execute.");
+ return ret;
+ }
/*
* Set up to trap execution at slot 0 when the TSL sequencer cycles
@@ -527,8 +531,10 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val)
*/
ret = comedi_timeout(dev, NULL, NULL, s626_send_dac_eoc,
s626_send_dac_wait_fb_buffer2_msb_00);
- if (ret)
+ if (ret) {
comedi_error(dev, "TSL timeout waiting for slot 0 to execute.");
+ return ret;
+ }
}
/*
* Either (1) we were too late setting the slot 0 trap; the TSL
@@ -549,14 +555,17 @@ static void s626_send_dac(struct comedi_device *dev, uint32_t val)
*/
ret = comedi_timeout(dev, NULL, NULL, s626_send_dac_eoc,
s626_send_dac_wait_fb_buffer2_msb_ff);
- if (ret)
+ if (ret) {
comedi_error(dev, "TSL timeout waiting for slot 0 to execute.");
+ return ret;
+ }
+ return 0;
}
/*
* Private helper function: Write setpoint to an application DAC channel.
*/
-static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
+static int s626_set_dac(struct comedi_device *dev, uint16_t chan,
int16_t dacdata)
{
struct s626_private *devpriv = dev->private;
@@ -619,10 +628,10 @@ static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
val |= ((uint32_t)(chan & 1) << 15); /* Address the DAC channel
* within the device. */
val |= (uint32_t)dacdata; /* Include DAC setpoint data. */
- s626_send_dac(dev, val);
+ return s626_send_dac(dev, val);
}
-static void s626_write_trim_dac(struct comedi_device *dev, uint8_t logical_chan,
+static int s626_write_trim_dac(struct comedi_device *dev, uint8_t logical_chan,
uint8_t dac_data)
{
struct s626_private *devpriv = dev->private;
@@ -669,17 +678,22 @@ static void s626_write_trim_dac(struct comedi_device *dev, uint8_t logical_chan,
* Address the DAC channel within the trimdac device.
* Include DAC setpoint data.
*/
- s626_send_dac(dev, (chan << 8) | dac_data);
+ return s626_send_dac(dev, (chan << 8) | dac_data);
}
-static void s626_load_trim_dacs(struct comedi_device *dev)
+static int s626_load_trim_dacs(struct comedi_device *dev)
{
uint8_t i;
+ int ret;
/* Copy TrimDac setpoint values from EEPROM to TrimDacs. */
- for (i = 0; i < ARRAY_SIZE(s626_trimchan); i++)
- s626_write_trim_dac(dev, i,
+ for (i = 0; i < ARRAY_SIZE(s626_trimchan); i++) {
+ ret = s626_write_trim_dac(dev, i,
s626_i2c_read(dev, s626_trimadrs[i]));
+ if (ret)
+ return ret;
+ }
+ return 0;
}
/* ****** COUNTER FUNCTIONS ******* */
@@ -2378,6 +2392,7 @@ static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
{
struct s626_private *devpriv = dev->private;
int i;
+ int ret;
uint16_t chan = CR_CHAN(insn->chanspec);
int16_t dacdata;
@@ -2386,7 +2401,9 @@ static int s626_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[i];
dacdata -= (0x1fff);
- s626_set_dac(dev, chan, dacdata);
+ ret = s626_set_dac(dev, chan, dacdata);
+ if (ret)
+ return ret;
}
return i;
@@ -2622,12 +2639,13 @@ static int s626_allocate_dma_buffers(struct comedi_device *dev)
return 0;
}
-static void s626_initialize(struct comedi_device *dev)
+static int s626_initialize(struct comedi_device *dev)
{
struct s626_private *devpriv = dev->private;
dma_addr_t phys_buf;
uint16_t chan;
int i;
+ int ret;
/* Enable DEBI and audio pins, enable I2C interface */
s626_mc_enable(dev, S626_MC1_DEBI | S626_MC1_AUDIO | S626_MC1_I2C,
@@ -2828,7 +2846,9 @@ static void s626_initialize(struct comedi_device *dev)
* sometimes causes the first few TrimDAC writes to malfunction.
*/
s626_load_trim_dacs(dev);
- s626_load_trim_dacs(dev);
+ ret = s626_load_trim_dacs(dev);
+ if (ret)
+ return ret;
/*
* Manually init all gate array hardware in case this is a soft
@@ -2842,8 +2862,11 @@ static void s626_initialize(struct comedi_device *dev)
* Init all DAC outputs to 0V and init all DAC setpoint and
* polarity images.
*/
- for (chan = 0; chan < S626_DAC_CHANNELS; chan++)
- s626_set_dac(dev, chan, 0);
+ for (chan = 0; chan < S626_DAC_CHANNELS; chan++) {
+ ret = s626_set_dac(dev, chan, 0);
+ if (ret)
+ return ret;
+ }
/* Init counters */
s626_counters_init(dev);
@@ -2859,6 +2882,8 @@ static void s626_initialize(struct comedi_device *dev)
/* Initialize the digital I/O subsystem */
s626_dio_init(dev);
+
+ return 0;
}
static int s626_auto_attach(struct comedi_device *dev,
@@ -2979,7 +3004,9 @@ static int s626_auto_attach(struct comedi_device *dev,
s->insn_read = s626_enc_insn_read;
s->insn_write = s626_enc_insn_write;
- s626_initialize(dev);
+ ret = s626_initialize(dev);
+ if (ret)
+ return ret;
return 0;
}
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists