linux-kernel - RE: [PATCH V1 1/2] mfd: da9063: Upgrade of register definitions to support production silicon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6ED8E3B22081A4459DAC7699F3695FB7A0C77018@SW-EX-MBX01.diasemi.com>
Date:	Mon, 10 Mar 2014 15:50:57 +0000
From:	"Opensource [Steve Twiss]" <stwiss.opensource@...semi.com>
To:	Lee Jones <lee.jones@...aro.org>
CC:	Mark Brown <broonie@...aro.org>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	David Dajun Chen <david.chen@...semi.com>,
	LKML <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH V1 1/2] mfd: da9063: Upgrade of register definitions to
 support production silicon

On 10 March 2014 14:03, Lee Jones wrote:

>> From: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
>>
>> This patch updates the register definitions for DA9063 to support the
>> production silicon variant code ID (0x5). These changes are not backwards
>> compatible with the previous register definitions and can only be used
>> with the production variant of DA9063.
>>
>> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@...semi.com>
>> ---
>> Checks performed with next-20140306/scripts/checkpatch.pl
>>  registers.h               total: 0 errors, 0 warnings, 1032 lines checked
>>
>> A brief summary of the changes include:
>>
>> - Introduction of a new DA9063_REG_ALARM_S register (now appearing at
>>   addr=0x46) allowing alarm second resolutions and which causes a shift
>>   in the register map for the RTC registers;
>> - Two new configuration registers DA9063_REG_CONFIG_M/N at 0x112 & 0x113;
>> - Modified register ranges for MON_REG_[1-6] which now appears at the
>>   addr=0x114 onwards;
>> - New register addresses for the general purpose registers GP_ID_[0-19]
>>   (now appearing at 0x121 onwards);
>> - Renaming of some definitions to match our hardware design conventions;
>> - There are also some bit-pattern additions that define some functionality
>>   alterations of the registers. One notable addition is:
>>   DA9063_BUCK_SLOWSTART can also be found in the CONTROL_B register and
>>   enables a BUCK slow start (reduced inrush current; increased startup
>>   time);
>>
>>  include/linux/mfd/da9063/registers.h |  120 ++++++++++++++++++----------------
>>  1 file changed, 62 insertions(+), 58 deletions(-)
>
>Well, as this doesn't seem to cause any issues when building and I'm
>going to guess that the other patch in the set won't be a problem (as
>you didn't send it to me, so I'm gussing it's insignificant), I'll
>apply the patch.
>
>Applied, thanks.

Hi Lee,

Thanks for this.

It looks like made a mess of the To: and Cc: e-mail list in my submission patches
for this one. The second patch (the RTC driver) should have been CC'ed to you
also. 
Sorry. I will try to get my e-mail lists in order for my next submission.

The RTC driver component relies on the register change patch which you just
applied. This RTC component was reviewed and Ack'ed by Alessandro Zummo
here:
http://www.kernelhub.org/?p=2&msg=427642

There was no way for you to know any of this because I had not CC'ed you
properly on this part.

It is possible to add the RTC component as well or shall I resend that part
again?

Regards,
Steve