| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <531F49C3.2020506@atmel.com>
Date: Tue, 11 Mar 2014 18:37:07 +0100
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: Wenyou Yang <wenyou.yang@...el.com>, <linus.walleij@...aro.org>,
"Boris BREZILLON" <b.brezillon.dev@...il.com>,
boris brezillon <b.brezillon@...rkiz.com>
CC: <plagnioj@...osoft.com>, <b.brezillon@...rkiz.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>
Subject: Re: [PATCH] pinctrl: at91: add the config GPIO_OUTPUT_x
On 05/03/2014 02:53, Wenyou Yang :
> In order to support the pinctrl sleep state.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
Wenyou,
This patch has been discussed here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/194975.html
I even gave my Acknowledgement on Boris' patch. Can you please check the
differences between Boris' patch and yours?
Linus,
For the nature of this feature, I would like to have your clear advice
as this is needed and has been proposed twice (at least). This feature
is needed for power management states of GPIOs.
Best regards,
> ---
> Hi Linus,
>
> The patch is based on branch: for-next
> git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
>
> Best Regards,
> Wenyou Yang
>
> drivers/pinctrl/pinctrl-at91.c | 31 +++++++++++++++++++++++++++++++
> include/dt-bindings/pinctrl/at91.h | 2 ++
> 2 files changed, 33 insertions(+)
>
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 5d24aae..fc51e59 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -62,6 +62,8 @@ static int gpio_banks;
> #define DEGLITCH (1 << 2)
> #define PULL_DOWN (1 << 3)
> #define DIS_SCHMIT (1 << 4)
> +#define GPIO_OUTPUT_HIGH (1 << 5)
> +#define GPIO_OUTPUT_LOW (1 << 6)
> #define DEBOUNCE (1 << 16)
> #define DEBOUNCE_VAL_SHIFT 17
> #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
> @@ -152,12 +154,15 @@ struct at91_pinctrl_mux_ops {
> void (*set_pulldown)(void __iomem *pio, unsigned mask, bool is_on);
> bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
> void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
> + bool (*get_gpio_output)(void __iomem *pio, unsigned mask);
> + void (*set_gpio_output)(void __iomem *pio, unsigned mask, bool is_high);
> /* irq */
> int (*irq_type)(struct irq_data *d, unsigned type);
> };
>
> static int gpio_irq_type(struct irq_data *d, unsigned type);
> static int alt_gpio_irq_type(struct irq_data *d, unsigned type);
> +static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input);
>
> struct at91_pinctrl {
> struct device *dev;
> @@ -472,6 +477,20 @@ static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
> return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
> }
>
> +static bool at91_mux_pio3_get_gpio_output(void __iomem *pio, unsigned pin)
> +{
> + return (__raw_readl(pio + PIO_ODSR) >> pin) & 0x1;
> +}
> +
> +static void at91_mux_pio3_set_gpio_output(void __iomem *pio,
> + unsigned mask,
> + bool is_high)
> +{
> + at91_mux_gpio_enable(pio, mask, 0);
> + writel_relaxed(mask, pio + (is_high ? PIO_SODR : PIO_CODR));
> +}
> +
> +
> static struct at91_pinctrl_mux_ops at91rm9200_ops = {
> .get_periph = at91_mux_get_periph,
> .mux_A_periph = at91_mux_set_A_periph,
> @@ -495,6 +514,8 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
> .set_pulldown = at91_mux_pio3_set_pulldown,
> .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
> .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
> + .get_gpio_output = at91_mux_pio3_get_gpio_output,
> + .set_gpio_output = at91_mux_pio3_set_gpio_output,
> .irq_type = alt_gpio_irq_type,
> };
>
> @@ -741,6 +762,10 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
> *config |= PULL_DOWN;
> if (info->ops->get_schmitt_trig && info->ops->get_schmitt_trig(pio, pin))
> *config |= DIS_SCHMIT;
> + if (info->ops->get_gpio_output) {
> + *config |= info->ops->get_gpio_output(pio, pin) ?
> + GPIO_OUTPUT_HIGH : GPIO_OUTPUT_LOW;
> + }
>
> return 0;
> }
> @@ -778,6 +803,12 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
> info->ops->set_pulldown(pio, mask, config & PULL_DOWN);
> if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT)
> info->ops->disable_schmitt_trig(pio, mask);
> + if (info->ops->set_gpio_output) {
> + if (config & GPIO_OUTPUT_HIGH)
> + info->ops->set_gpio_output(pio, mask, 1);
> + if (config & GPIO_OUTPUT_LOW)
> + info->ops->set_gpio_output(pio, mask, 0);
> + };
>
> } /* for each config */
>
> diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
> index 0fee6ff..e799268 100644
> --- a/include/dt-bindings/pinctrl/at91.h
> +++ b/include/dt-bindings/pinctrl/at91.h
> @@ -15,6 +15,8 @@
> #define AT91_PINCTRL_DEGLITCH (1 << 2)
> #define AT91_PINCTRL_PULL_DOWN (1 << 3)
> #define AT91_PINCTRL_DIS_SCHMIT (1 << 4)
> +#define AT91_PINCTRL_OUTPUT_HIGH (1 << 5)
> +#define AT91_PINCTRL_OUTPUT_LOW (1 << 6)
> #define AT91_PINCTRL_DEBOUNCE (1 << 16)
> #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17)
>
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists