early console in setup code early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-01849-g221f19a (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 SMP Wed Mar 12 14:25:00 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c6-0312/tip:master/.vmlinuz-221f19a662f536aa8640694e744019776d2df584-20140312142552-6-jaketown branch=tip/master BOOT_IMAGE=/kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x027d0000, 0x027d0fff] PGTABLE [ 0.000000] BRK [0x027d1000, 0x027d1fff] PGTABLE [ 0.000000] BRK [0x027d2000, 0x027d2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 4k [ 0.000000] BRK [0x027d3000, 0x027d3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 4k [ 0.000000] BRK [0x027d4000, 0x027d4fff] PGTABLE [ 0.000000] BRK [0x027d5000, 0x027d5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0e93d000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 000040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:e8bd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000e400000 s78912 r8192 d23488 u1048576 [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 0:e8bd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr e40cc40 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64391 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c6-0312/tip:master/.vmlinuz-221f19a662f536aa8640694e744019776d2df584-20140312142552-6-jaketown branch=tip/master BOOT_IMAGE=/kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Memory: 207700K/261744K available (7129K kernel code, 1573K rwdata, 3732K rodata, 1236K init, 10676K bss, 54044K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:512 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-01849-g221f19a (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 SMP Wed Mar 12 14:25:00 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c6-0312/tip:master/.vmlinuz-221f19a662f536aa8640694e744019776d2df584-20140312142552-6-jaketown branch=tip/master BOOT_IMAGE=/kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x027d0000, 0x027d0fff] PGTABLE [ 0.000000] BRK [0x027d1000, 0x027d1fff] PGTABLE [ 0.000000] BRK [0x027d2000, 0x027d2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 4k [ 0.000000] BRK [0x027d3000, 0x027d3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 4k [ 0.000000] BRK [0x027d4000, 0x027d4fff] PGTABLE [ 0.000000] BRK [0x027d5000, 0x027d5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0e93d000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 000040 [ 0.000000] ACPI: SSDT 000000000ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:e8bd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88000e400000 s78912 r8192 d23488 u1048576 [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 0:e8bd001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr e40cc40 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64391 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c6-0312/tip:master/.vmlinuz-221f19a662f536aa8640694e744019776d2df584-20140312142552-6-jaketown branch=tip/master BOOT_IMAGE=/kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.000000] Memory: 207700K/261744K available (7129K kernel code, 1573K rwdata, 3732K rodata, 1236K init, 10676K bss, 54044K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:512 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing: ok | ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context: ok | ok | ok | [ 0.000000] try: ok | ok | ok | [ 0.000000] block: ok | ok | ok | [ 0.000000] spinlock: ok | ok | ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 253 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 1599.960 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 3199.92 BogoMIPS (lpj=1599960) [ 0.004033] pid_max: default: 32768 minimum: 301 [ 0.006738] Security Framework initialized [ 0.008211] Mount-cache hash table entries: 256 [ 0.012543] Initializing cgroup subsys devices [ 0.013108] Initializing cgroup subsys blkio [ 0.014422] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.014422] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.014422] tlb_flushall_shift: 6 [ 0.015152] debug: unmapping init [mem 0xffffffff81d5d000-0xffffffff81d61fff] [ 0.029676] ftrace: allocating 23616 entries in 93 pages [ 0.049927] Getting VERSION: 50014 [ 0.050047] Getting VERSION: 50014 [ 0.051045] Getting ID: 0 [ 0.052058] Getting ID: ff000000 [ 0.053054] Getting LVT0: 8700 [ 0.054044] Getting LVT1: 8400 [ 0.055270] enabled ExtINT on CPU#0 [ 0.060600] ENABLING IO-APIC IRQs [ 0.062037] init IO_APIC IRQs [ 0.063027] apic 0 pin 0 not connected [ 0.064117] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.065139] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.066121] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.067123] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.068107] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.069124] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.071040] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.072111] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.073114] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.074133] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.075120] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.076167] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.077122] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.078131] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.079120] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.080099] apic 0 pin 16 not connected [ 0.081023] apic 0 pin 17 not connected [ 0.082024] apic 0 pin 18 not connected [ 0.083022] apic 0 pin 19 not connected [ 0.084033] apic 0 pin 20 not connected [ 0.085022] apic 0 pin 21 not connected [ 0.086023] apic 0 pin 22 not connected [ 0.087023] apic 0 pin 23 not connected [ 0.088260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089021] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.093014] Using local APIC timer interrupts. [ 0.093014] calibrating APIC timer ... [ 0.095000] ... lapic delta = 6249816 [ 0.095000] ... PM-Timer delta = 357838 [ 0.095000] ... PM-Timer result ok [ 0.095000] ..... delta 6249816 [ 0.095000] ..... mult: 268427553 [ 0.095000] ..... calibration result: 999970 [ 0.095000] ..... CPU clock speed is 1599.0405 MHz. [ 0.095000] ..... host bus clock speed is 999.0970 MHz. [ 0.095269] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.101811] x86: Booting SMP configuration: [ 0.102016] .... node #0, CPUs: #1 [ 0.003000] kvm-clock: cpu 1, msr 0:e8bd041, secondary cpu clock [ 0.003000] masked ExtINT on CPU#1 [ 0.120328] KVM setup async PF for cpu 1 [ 0.120492] x86: Booted up 1 node, 2 CPUs [ 0.120497] smpboot: Total of 2 processors activated (6399.84 BogoMIPS) [ 0.121859] kvm-stealtime: cpu 1, msr e50cc40 [ 0.138625] devtmpfs: initialized [ 0.149323] xor: measuring software checksum speed [ 0.160015] prefetch64-sse: 4432.000 MB/sec [ 0.171015] generic_sse: 3688.000 MB/sec [ 0.172012] xor: using function: prefetch64-sse (4432.000 MB/sec) [ 0.173044] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.175912] regulator-dummy: no parameters [ 0.177148] NET: Registered protocol family 16 [ 0.179767] cpuidle: using governor menu [ 0.180261] ACPI: bus type PCI registered [ 0.181096] PCI: Using configuration type 1 for base access [ 0.195109] bio: create slab at 0 [ 0.214028] raid6: sse2x1 3031 MB/s [ 0.232015] raid6: sse2x2 3789 MB/s [ 0.250025] raid6: sse2x4 4371 MB/s [ 0.251013] raid6: using algorithm sse2x4 (4371 MB/s) [ 0.252012] raid6: using intx1 recovery algorithm [ 0.253514] ACPI: Added _OSI(Module Device) [ 0.254015] ACPI: Added _OSI(Processor Device) [ 0.255013] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.256013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.274625] ACPI: Interpreter enabled [ 0.275025] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.278022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.281098] ACPI: (supports S0 S3 S5) [ 0.282013] ACPI: Using IOAPIC for interrupt routing [ 0.284082] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.317807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.318029] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.319131] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.322528] PCI host bridge to bus 0000:00 [ 0.323021] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.324017] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.325018] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.326016] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.327016] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.329088] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.332721] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.335612] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.343017] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.348696] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.350622] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.351042] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.353832] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.356111] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.359104] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.372107] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.375365] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.378015] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.381018] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.392019] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.394959] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.397014] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.407154] pci_bus 0000:00: on NUMA node 0 [ 0.410784] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.414246] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.419114] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.424454] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.429202] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.435000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.438397] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.439031] vgaarb: loaded [ 0.440016] vgaarb: bridge control possible 0000:00:02.0 [ 0.443308] SCSI subsystem initialized [ 0.444172] libata version 3.00 loaded. [ 0.445124] ACPI: bus type USB registered [ 0.446276] usbcore: registered new interface driver usbfs [ 0.448121] usbcore: registered new interface driver hub [ 0.450534] usbcore: registered new device driver usb [ 0.451358] pps_core: LinuxPPS API ver. 1 registered [ 0.452013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.453061] PTP clock support registered [ 0.454391] PCI: Using ACPI for IRQ routing [ 0.455028] PCI: pci_cache_line_size set to 64 bytes [ 0.456362] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.457052] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.460725] NET: Registered protocol family 8 [ 0.461014] NET: Registered protocol family 20 [ 0.463696] Switched to clocksource kvm-clock [ 0.470770] Warning: could not register annotated branches stats [ 0.570228] pnp: PnP ACPI init [ 0.573430] ACPI: bus type PNP registered [ 0.577091] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.584375] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.589577] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.596447] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.601264] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.608104] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.613163] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.619485] pnp 00:03: [dma 2] [ 0.622832] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.627803] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.634730] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.640089] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.646852] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.653434] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.659401] pnp: PnP ACPI: found 7 devices [ 0.663066] ACPI: bus type PNP unregistered [ 0.703427] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.708077] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.712232] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.717094] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.722266] NET: Registered protocol family 1 [ 0.726155] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.730903] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.735536] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.740453] pci 0000:00:02.0: Boot video device [ 0.744450] PCI: CLS 0 bytes, default 64 [ 0.749799] Unpacking initramfs... [ 2.855540] debug: unmapping init [mem 0xffff88000e93d000-0xffff88000ffeffff] [ 2.944096] DMA-API: preallocated 65536 debug entries [ 2.946651] DMA-API: debugging enabled by kernel config [ 2.951454] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 2.957223] PCLMULQDQ-NI instructions are not detected. [ 2.959762] sha256_ssse3: Neither AVX nor SSSE3 is available/usable. [ 2.962616] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 2.965453] AVX or AES-NI instructions are not detected. [ 2.967975] AVX instructions are not detected. [ 2.970215] AVX2 or AES-NI instructions are not detected. [ 2.974335] futex hash table entries: 512 (order: 4, 65536 bytes) [ 2.977369] Initialise system trusted keyring [ 2.979863] audit: initializing netlink subsys (disabled) [ 2.982718] audit: type=2000 audit(1394605646.969:1): initialized [ 2.989216] VFS: Disk quotas dquot_6.5.2 [ 2.991614] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.998406] GFS2 installed [ 3.000186] msgmni has been set to 405 [ 3.028214] alg: No test for stdrng (krng) [ 3.030645] NET: Registered protocol family 38 [ 3.033146] Key type asymmetric registered [ 3.035491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.039658] io scheduler noop registered (default) [ 3.042134] io scheduler deadline registered [ 3.044350] test_string_helpers: Running tests... [ 3.059284] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 3.061739] crc32: self tests passed, processed 225944 bytes in 5974602 nsec [ 3.071765] crc32c: CRC_LE_BITS = 1 [ 3.073711] crc32c: self tests passed, processed 225944 bytes in 3412545 nsec [ 3.851662] crc32_combine: 8373 self tests passed [ 3.952264] tsc: Refined TSC clocksource calibration: 1599.926 MHz [ 4.573404] crc32c_combine: 8373 self tests passed [ 4.584837] no IO addresses supplied [ 4.586974] usbcore: registered new interface driver smscufx [ 4.589696] ipmi message handler version 39.2 [ 4.591983] IPMI System Interface driver. [ 4.594298] ipmi_si: Adding default-specified kcs state machine [ 4.597249] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 4.601836] ipmi_si: Interface detection failed [ 4.608145] ipmi_si: Adding default-specified smic state machine [ 4.611133] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 4.615760] ipmi_si: Interface detection failed [ 4.622093] ipmi_si: Adding default-specified bt state machine [ 4.624984] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 4.629540] ipmi_si: Interface detection failed [ 4.635478] ipmi_si: Unable to find any System Interface(s) [ 4.638078] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 4.642617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 4.646478] ACPI: Power Button [PWRF] [ 4.650175] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 4.652733] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.681280] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.688400] serial: Freescale lpuart driver [ 4.690757] smapi::smapi_init, ERROR invalid usSmapiID [ 4.693199] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 4.697549] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 4.701310] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 4.704419] parport_pc 00:04: reported by Plug and Play ACPI [ 4.707401] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.800866] blk-mq: CPU -> queue map [ 4.804117] CPU 0 -> Queue 0 [ 4.807086] CPU 1 -> Queue 0 [ 4.813249] nullb0: unknown partition table [ 4.817952] blk-mq: CPU -> queue map [ 4.821160] CPU 0 -> Queue 0 [ 4.824192] CPU 1 -> Queue 0 [ 4.828812] nullb1: unknown partition table [ 4.833725] null: module loaded [ 4.836980] lkdtm: No crash points registered, enable through debugfs [ 4.841940] usbcore: registered new interface driver viperboard [ 4.846407] Loading iSCSI transport class v2.0-870. [ 4.851636] hp_sw: device handler registered [ 4.855248] emc: device handler registered [ 4.858699] alua: device handler registered [ 4.862322] osst :I: Tape driver with OnStream support version 0.99.4 [ 4.862322] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 4.872888] parport_pc 00:04: registered master spi32766 (dynamic) [ 4.878320] spi spi32766.0: spi_bitbang_setup, 166 nsec/bit [ 4.882666] spi spi32766.0: setup mode 0, 3wire, 8 bits/w, 6000000 Hz max --> 0 [ 4.889248] parport_pc 00:04: registered child spi32766.0 [ 4.893556] spi spi32766.0: spidev_lm70 at spi32766.0 [ 4.897781] paride: aten registered as protocol 0 [ 4.901483] paride: comm registered as protocol 1 [ 4.905301] paride: epia registered as protocol 2 [ 4.908936] paride: frpw registered as protocol 3 [ 4.912895] paride: ktti registered as protocol 4 [ 4.916999] pcd: pcd version 1.07, major 46, nice 0 [ 4.920695] parport0: no more devices allowed [ 4.924509] parport0: no more devices allowed [ 4.928250] parport0: no more devices allowed [ 4.931762] parport0: no more devices allowed [ 4.935155] parport0: no more devices allowed [ 4.938815] pcd0: Autoprobe failed [ 4.941916] pcd: No CD-ROM drive found [ 4.945168] pt: pt version 1.04, major 96 [ 4.948602] parport0: no more devices allowed [ 4.952091] parport0: no more devices allowed [ 4.955825] parport0: no more devices allowed [ 4.959274] parport0: no more devices allowed [ 4.962948] parport0: no more devices allowed [ 4.966490] pt0: Autoprobe failed [ 4.969600] pt: No ATAPI tape drive detected [ 4.974374] usbcore: registered new interface driver cdc_acm [ 4.978678] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.985196] usbcore: registered new interface driver usbtmc [ 4.989791] usbcore: registered new interface driver usb-storage [ 4.994241] usbcore: registered new interface driver ums-freecom [ 4.998839] usbcore: registered new interface driver ums-jumpshot [ 5.003520] usbcore: registered new interface driver ums-onetouch [ 5.008287] usbcore: registered new interface driver ums-realtek [ 5.012855] usbcore: registered new interface driver ums-usbat [ 5.017280] usbcore: registered new interface driver cytherm [ 5.021657] usbcore: registered new interface driver emi26 - firmware loader [ 5.026682] usbcore: registered new interface driver emi62 - firmware loader [ 5.029818] usbcore: registered new interface driver trancevibrator [ 5.032810] usbcore: registered new interface driver cxacru [ 5.035497] usbcore: registered new interface driver speedtch [ 5.038370] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.044460] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.046906] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.183548] usbcore: registered new interface driver iforce [ 5.186486] usbcore: registered new interface driver gtco [ 5.189091] usbcore: registered new interface driver hanwang [ 5.191766] usbcore: registered new interface driver wacom [ 5.194702] pps_parport: parallel port PPS client [ 5.197042] parport0: no more devices allowed [ 5.199236] pps_parport: couldn't register with parport0 [ 5.201832] Driver for 1-wire Dallas network protocol. [ 5.204455] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 5.207335] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 5.212517] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 5.217136] wafer5823wdt: initialized. timeout=60 sec (nowayout=0) [ 5.219473] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 5.224682] sc1200wdt: build 20020303 [ 5.226830] sc1200wdt: io parameter must be specified [ 5.229468] pc87413_wdt: Version 1.1 at io 0x2E [ 5.231860] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 5.234964] sbc60xxwdt: I/O address 0x0443 already in use [ 5.237644] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 5.240595] w83697hf_wdt: watchdog not found at address 0x2e [ 5.243347] w83697hf_wdt: No W83697HF/HG could be found [ 5.245966] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 5.249224] ledtrig-cpu: registered to indicate activity on CPUs [ 5.252947] parport0: no more devices allowed [ 5.255273] panel: panel_attach: port->number=0 parport=0, parport_register_device() failed [ 5.259467] panel: driver version 0.9.5 not yet registered [ 5.262227] usbcore: registered new interface driver tranzport [ 5.265130] usbcore: registered new interface driver alphatrack [ 5.267902] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45 [ 5.271065] Copyright 2010. Beceem Communications Inc [ 5.273754] usbcore: registered new interface driver usbbcm [ 5.277917] usbcore: registered new interface driver cedusb [ 5.280699] dgap: dgap-1.3-16, Digi International Part Number 40002347_C [ 5.284053] dgap: For the tools package or updated drivers please visit http://www.digi.com [ 5.290844] netem: version 1.3 [ 5.292924] NET: Registered protocol family 4 [ 5.295401] NET: Registered protocol family 9 [ 5.297722] X25: Linux Version 0.2 [ 5.299787] lec:lane_module_init: lec.c: initialized [ 5.302269] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 5.306720] DECnet: Routing cache hash table of 256 buckets, 16Kbytes [ 5.309930] NET: Registered protocol family 12 [ 5.312336] 9pnet: Installing 9P2000 support [ 5.314762] NET: Registered protocol family 37 [ 5.317526] batman_adv: B.A.T.M.A.N. advanced 2014.1.0 (compatibility version 15) loaded [ 5.322003] [ 5.322003] printing PIC contents [ 5.325090] ... PIC IMR: ffff [ 5.326053] ... PIC IRR: 1013 [ 5.328838] ... PIC ISR: 0000 [ 5.330755] ... PIC ELCR: 0c00 [ 5.332644] printing local APIC contents on CPU#0/0: [ 5.333604] ... APIC ID: 00000000 (0) [ 5.333604] ... APIC VERSION: 00050014 [ 5.333604] ... APIC TASKPRI: 00000000 (00) [ 5.333604] ... APIC PROCPRI: 00000000 [ 5.333604] ... APIC LDR: 01000000 [ 5.333604] ... APIC DFR: ffffffff [ 5.333604] ... APIC SPIV: 000001ff [ 5.333604] ... APIC ISR field: [ 5.333604] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.333604] ... APIC TMR field: [ 5.333604] 0000000002000000000000000000000000000000000000000000000000000000 [ 5.333604] ... APIC IRR field: [ 5.333604] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.333604] ... APIC ESR: 00000000 [ 5.333604] ... APIC ICR: 000008fd [ 5.333604] ... APIC ICR2: 02000000 [ 5.333604] ... APIC LVTT: 000000ef [ 5.333604] ... APIC LVTPC: 00010000 [ 5.333604] ... APIC LVT0: 00010700 [ 5.333604] ... APIC LVT1: 00000400 [ 5.333604] ... APIC LVTERR: 000000fe [ 5.333604] ... APIC TMICT: 00005ea6 [ 5.333604] ... APIC TMCCT: 00000000 [ 5.333604] ... APIC TDCR: 00000003 [ 5.333604] [ 5.401066] number of MP IRQ sources: 15. [ 5.403220] number of IO-APIC #0 registers: 24. [ 5.405553] testing the IO APIC....................... [ 5.408107] IO APIC #0...... [ 5.409895] .... register #00: 00000000 [ 5.412001] ....... : physical APIC id: 00 [ 5.414272] ....... : Delivery Type: 0 [ 5.416449] ....... : LTS : 0 [ 5.418590] .... register #01: 00170011 [ 5.420694] ....... : max redirection entries: 17 [ 5.423187] ....... : PRQ implemented: 0 [ 5.425429] ....... : IO APIC version: 11 [ 5.427683] .... register #02: 00000000 [ 5.429783] ....... : arbitration: 00 [ 5.431950] .... IRQ redirection table: [ 5.434083] 1 0 0 0 0 0 0 00 [ 5.436429] 0 0 0 0 0 1 1 31 [ 5.438772] 0 0 0 0 0 1 1 30 [ 5.441124] 0 0 0 0 0 1 1 33 [ 5.443471] 1 0 0 0 0 1 1 34 [ 5.445823] 1 1 0 0 0 1 1 35 [ 5.448169] 0 0 0 0 0 1 1 36 [ 5.450522] 0 0 0 0 0 1 1 37 [ 5.452866] 0 0 0 0 0 1 1 38 [ 5.455223] 0 1 0 0 0 1 1 39 [ 5.457581] 1 1 0 0 0 1 1 3A [ 5.459930] 1 1 0 0 0 1 1 3B [ 5.462284] 0 0 0 0 0 1 1 3C [ 5.464627] 0 0 0 0 0 1 1 3D [ 5.466971] 0 0 0 0 0 1 1 3E [ 5.469323] 0 0 0 0 0 1 1 3F [ 5.471674] 1 0 0 0 0 0 0 00 [ 5.474043] 1 0 0 0 0 0 0 00 [ 5.476382] 1 0 0 0 0 0 0 00 [ 5.478731] 1 0 0 0 0 0 0 00 [ 5.481081] 1 0 0 0 0 0 0 00 [ 5.483430] 1 0 0 0 0 0 0 00 [ 5.485771] 1 0 0 0 0 0 0 00 [ 5.488144] 1 0 0 0 0 0 0 00 [ 5.490466] IRQ to pin mappings: [ 5.492348] IRQ0 -> 0:2 [ 5.494468] IRQ1 -> 0:1 [ 5.496573] IRQ3 -> 0:3 [ 5.498698] IRQ4 -> 0:4 [ 5.500812] IRQ5 -> 0:5 [ 5.502936] IRQ6 -> 0:6 [ 5.505100] IRQ7 -> 0:7 [ 5.507208] IRQ8 -> 0:8 [ 5.509306] IRQ9 -> 0:9 [ 5.511436] IRQ10 -> 0:10 [ 5.513609] IRQ11 -> 0:11 [ 5.515783] IRQ12 -> 0:12 [ 5.517953] IRQ13 -> 0:13 [ 5.520161] IRQ14 -> 0:14 [ 5.522337] IRQ15 -> 0:15 [ 5.524514] .................................... done. [ 5.527981] Loading compiled-in X.509 certificates [ 5.531303] bio: create slab at 1 [ 5.535241] Btrfs loaded, debug=on, assert=on [ 5.540862] regulator-dummy: disabling [ 5.544893] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 5.550712] debug: unmapping init [mem 0xffffffff81c28000-0xffffffff81d5cfff] [ 5.573371] random: init urandom read with 6 bits of entropy available [ 5.636471] ------------[ cut here ]------------ [ 5.637033] WARNING: CPU: 1 PID: 77 at kernel/locking/mutex-debug.c:82 debug_mutex_unlock+0x211/0x220() [ 5.637033] DEBUG_LOCKS_WARN_ON(lock->owner != current) [ 5.637033] Modules linked in: [ 5.637033] CPU: 1 PID: 77 Comm: sh Not tainted 3.14.0-rc6-01849-g221f19a #2 [ 5.637033] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.637033] 0000000000000009 ffff8800070bfc98 ffffffff816e5665 ffff8800070bfce0 [ 5.637033] ffff8800070bfcd0 ffffffff8106ad6d ffff88000c86d3a0 0000000000000001 [ 5.637033] 0000000000000246 00000000000000b0 ffff88000c86d300 ffff8800070bfd30 [ 5.637033] Call Trace: [ 5.637033] [] dump_stack+0x4d/0x66 [ 5.637033] [] warn_slowpath_common+0x7d/0xa0 [ 5.637033] [] warn_slowpath_fmt+0x4c/0x50 [ 5.637033] [] debug_mutex_unlock+0x211/0x220 [ 5.637033] [] __mutex_unlock_slowpath+0xdb/0x210 [ 5.637033] [] mutex_unlock+0xe/0x10 [ 5.637033] [] vma_link+0x7f/0xd0 [ 5.637033] [] mmap_region+0x494/0x670 [ 5.637033] [] ? __lock_acquire+0x48e/0xcc0 [ 5.637033] [] do_mmap_pgoff+0x312/0x3e0 [ 5.637033] [] vm_mmap_pgoff+0x90/0xc0 [ 5.637033] [] SyS_mmap_pgoff+0xe7/0x110 [ 5.637033] [] SyS_mmap+0x22/0x30 [ 5.637033] [] system_call_fastpath+0x16/0x1b [ 5.637033] ---[ end trace 926fb1180f642ed0 ]--- [ 5.798610] init: Failed to create pty - disabling logging for job [ 5.801897] init: Temporary process spawn error: No such file or directory [ 5.829542] init: Failed to create pty - disabling logging for job [ 5.832623] init: Temporary process spawn error: No such file or directory [ 5.883978] init: Failed to create pty - disabling logging for job [ 5.887171] init: Temporary process spawn error: No such file or directory [ 5.893152] init: Failed to create pty - disabling logging for job [ 5.896243] init: Temporary process spawn error: No such file or directory [ 5.968710] init: Failed to create pty - disabling logging for job [ 5.971828] init: Temporary process spawn error: No such file or directory [ 5.983383] init: Failed to create pty - disabling logging for job [ 5.986958] init: Temporary process spawn error: No such file or directory [ 6.002093] init: Failed to create pty - disabling logging for job [ 6.021958] init: Failed to create pty - disabling logging for job [ 6.030188] init: Failed to create pty - disabling logging for job [ 6.037687] init: Failed to create pty - disabling logging for job [ 6.044367] init: Failed to create pty - disabling logging for job [ 6.050600] init: Failed to create pty - disabling logging for job [ 6.130203] init: Failed to create pty - disabling logging for job [ 6.138072] init: Failed to create pty - disabling logging for job [ 6.145774] init: Failed to create pty - disabling logging for job [ 6.165145] init: Failed to create pty - disabling logging for job [ 6.394190] init: Failed to create pty - disabling logging for job [ 6.408736] init: Failed to create pty - disabling logging for job [ 6.417732] init: Failed to create pty - disabling logging for job [ 6.425922] init: Failed to create pty - disabling logging for job [ 6.431641] init: Failed to create pty - disabling logging for job Kernel tests: Boot OK! [ 65.778319] init: Failed to create pty - disabling logging for job [ 66.952819] reboot: Restarting system Elapsed time: 75 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c6-0312/tip:master/.vmlinuz-221f19a662f536aa8640694e744019776d2df584-20140312142552-6-jaketown branch=tip/master BOOT_IMAGE=/kernel/x86_64-randconfig-c6-0312/221f19a662f536aa8640694e744019776d2df584/vmlinuz-3.14.0-rc6-01849-g221f19a' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 256 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::17103-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-jaketown-35 -serial file:/dev/shm/kboot/serial-quantal-jaketown-35 -daemonize -display none -monitor null