| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1394789408-14648-4-git-send-email-cw00.choi@samsung.com>
Date: Fri, 14 Mar 2014 18:30:03 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: myungjoo.ham@...sung.com, kyungmin.park@...sung.com
Cc: rafael.j.wysocki@...el.com, nm@...com, b.zolnierkie@...saung.com,
pawel.moll@....com, mark.rutland@....com, swarren@...dotorg.org,
ijc+devicetree@...lion.org.uk, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCHv3 3/8] devfreq: exynos4: Use common ppmu driver and get ppmu
address from dt data
This patch use common ppmu driver of exynos_ppmu.c driver instead of individual
function related to PPC because PPMU is integrated module with both PPC and
Bus event generator. When using PPMU to get bus performance read/write event,
exynos4_bus.c don't need to consider memory type.
And get ppmu address from dt data by using dt helper function (of_iomap).
And then this patch delete duplicate defined structure/enum.
For example,
busfreq@...A0000 {
compatible = "samsung,exynos4x12-busfreq";
reg = <0x106A0000 0x2000>, <0x106B0000 0x2000>;
regs-name = "PPMU_DMC0", "PPMU_DMC1";
};
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
---
drivers/devfreq/exynos/Makefile | 2 +-
drivers/devfreq/exynos/exynos4_bus.c | 234 +++++++++++++++++++----------------
2 files changed, 129 insertions(+), 107 deletions(-)
diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
index bfaaf5b..49bc917 100644
--- a/drivers/devfreq/exynos/Makefile
+++ b/drivers/devfreq/exynos/Makefile
@@ -1,3 +1,3 @@
# Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o
obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o
diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index 2d2b44b..8ccbb31 100644
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -24,17 +24,19 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/module.h>
+#include <mach/map.h>
+
+#include "exynos_ppmu.h"
+#include "exynos4_bus.h"
+
/* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */
#ifdef CONFIG_EXYNOS_ASV
extern unsigned int exynos_result_of_asv;
#endif
-#include <mach/map.h>
-
-#include "exynos4_bus.h"
-
#define MAX_SAFEVOLT 1200000 /* 1.2V */
enum exynos4_busf_type {
@@ -45,22 +47,6 @@ enum exynos4_busf_type {
/* Assume that the bus is saturated if the utilization is 40% */
#define BUS_SATURATION_RATIO 40
-enum ppmu_counter {
- PPMU_PMNCNT0 = 0,
- PPMU_PMCCNT1,
- PPMU_PMNCNT2,
- PPMU_PMNCNT3,
- PPMU_PMNCNT_MAX,
-};
-struct exynos4_ppmu {
- void __iomem *hw_base;
- unsigned int ccnt;
- unsigned int event;
- unsigned int count[PPMU_PMNCNT_MAX];
- bool ccnt_overflow;
- bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
enum busclk_level_idx {
LV_0 = 0,
LV_1,
@@ -69,6 +55,13 @@ enum busclk_level_idx {
LV_4,
_LV_END
};
+
+enum exynos_ppmu_idx {
+ PPMU_DMC0,
+ PPMU_DMC1,
+ PPMU_END,
+};
+
#define EX4210_LV_MAX LV_2
#define EX4x12_LV_MAX LV_4
#define EX4210_LV_NUM (LV_2 + 1)
@@ -92,7 +85,7 @@ struct busfreq_data {
struct regulator *vdd_int;
struct regulator *vdd_mif; /* Exynos4412/4212 only */
struct busfreq_opp_info curr_oppinfo;
- struct exynos4_ppmu dmc[2];
+ struct exynos_ppmu ppmu[PPMU_END];
struct notifier_block pm_notifier;
struct mutex lock;
@@ -102,12 +95,6 @@ struct busfreq_data {
unsigned int top_divtable[_LV_END];
};
-struct bus_opp_table {
- unsigned int idx;
- unsigned long clk;
- unsigned long volt;
-};
-
/* 4210 controls clock of mif and voltage of int */
static struct bus_opp_table exynos4210_busclk_table[] = {
{LV_0, 400000, 1150000},
@@ -525,27 +512,22 @@ static int exynos4x12_set_busclk(struct busfreq_data *data,
return 0;
}
-
static void busfreq_mon_reset(struct busfreq_data *data)
{
unsigned int i;
- for (i = 0; i < 2; i++) {
- void __iomem *ppmu_base = data->dmc[i].hw_base;
+ for (i = 0; i < PPMU_END; i++) {
+ void __iomem *ppmu_base = data->ppmu[i].hw_base;
- /* Reset PPMU */
- __raw_writel(0x8000000f, ppmu_base + 0xf010);
- __raw_writel(0x8000000f, ppmu_base + 0xf050);
- __raw_writel(0x6, ppmu_base + 0xf000);
- __raw_writel(0x0, ppmu_base + 0xf100);
+ /* Reset the performance and cycle counters */
+ exynos_ppmu_reset(ppmu_base);
- /* Set PPMU Event */
- data->dmc[i].event = 0x6;
- __raw_writel(((data->dmc[i].event << 12) | 0x1),
- ppmu_base + 0xfc);
+ /* Setup count registers to monitor read/write transactions */
+ data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
+ exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
+ data->ppmu[i].event[PPMU_PMNCNT3]);
- /* Start PPMU */
- __raw_writel(0x1, ppmu_base + 0xf000);
+ exynos_ppmu_start(ppmu_base);
}
}
@@ -553,23 +535,20 @@ static void exynos4_read_ppmu(struct busfreq_data *data)
{
int i, j;
- for (i = 0; i < 2; i++) {
- void __iomem *ppmu_base = data->dmc[i].hw_base;
- u32 overflow;
+ for (i = 0; i < PPMU_END; i++) {
+ void __iomem *ppmu_base = data->ppmu[i].hw_base;
- /* Stop PPMU */
- __raw_writel(0x0, ppmu_base + 0xf000);
+ exynos_ppmu_stop(ppmu_base);
/* Update local data from PPMU */
- overflow = __raw_readl(ppmu_base + 0xf050);
-
- data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100);
- data->dmc[i].ccnt_overflow = overflow & (1 << 31);
-
- for (j = 0; j < PPMU_PMNCNT_MAX; j++) {
- data->dmc[i].count[j] = __raw_readl(
- ppmu_base + (0xf110 + (0x10 * j)));
- data->dmc[i].count_overflow[j] = overflow & (1 << j);
+ data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
+
+ for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+ if (data->ppmu[i].event[j] == 0)
+ data->ppmu[i].count[j] = 0;
+ else
+ data->ppmu[i].count[j] =
+ exynos_ppmu_read(ppmu_base, j);
}
}
@@ -699,66 +678,42 @@ out:
return err;
}
-static int exynos4_get_busier_dmc(struct busfreq_data *data)
+static int exynos4_get_busier_ppmu(struct busfreq_data *data)
{
- u64 p0 = data->dmc[0].count[0];
- u64 p1 = data->dmc[1].count[0];
-
- p0 *= data->dmc[1].ccnt;
- p1 *= data->dmc[0].ccnt;
-
- if (data->dmc[1].ccnt == 0)
- return 0;
+ int i, j;
+ int busy = 0;
+ unsigned int temp = 0;
+
+ for (i = 0; i < PPMU_END; i++) {
+ for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+ if (data->ppmu[i].count[j] > temp) {
+ temp = data->ppmu[i].count[j];
+ busy = i;
+ }
+ }
+ }
- if (p0 > p1)
- return 0;
- return 1;
+ return busy;
}
static int exynos4_bus_get_dev_status(struct device *dev,
struct devfreq_dev_status *stat)
{
struct busfreq_data *data = dev_get_drvdata(dev);
- int busier_dmc;
- int cycles_x2 = 2; /* 2 x cycles */
- void __iomem *addr;
- u32 timing;
- u32 memctrl;
+ int busier;
exynos4_read_ppmu(data);
- busier_dmc = exynos4_get_busier_dmc(data);
+ busier = exynos4_get_busier_ppmu(data);
stat->current_frequency = data->curr_oppinfo.rate;
- if (busier_dmc)
- addr = S5P_VA_DMC1;
- else
- addr = S5P_VA_DMC0;
-
- memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */
- timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */
-
- switch ((memctrl >> 8) & 0xf) {
- case 0x4: /* DDR2 */
- cycles_x2 = ((timing >> 16) & 0xf) * 2;
- break;
- case 0x5: /* LPDDR2 */
- case 0x6: /* DDR3 */
- cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf);
- break;
- default:
- pr_err("%s: Unknown Memory Type(%d).\n", __func__,
- (memctrl >> 8) & 0xf);
- return -EINVAL;
- }
-
/* Number of cycles spent on memory access */
- stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2);
+ stat->busy_time = data->ppmu[busier].count[PPMU_PMNCNT3];
stat->busy_time *= 100 / BUS_SATURATION_RATIO;
- stat->total_time = data->dmc[busier_dmc].ccnt;
+ stat->total_time = data->ppmu[busier].ccnt;
/* If the counters have overflown, retry */
- if (data->dmc[busier_dmc].ccnt_overflow ||
- data->dmc[busier_dmc].count_overflow[0])
+ if (data->ppmu[busier].ccnt_overflow ||
+ data->ppmu[busier].count_overflow[0])
return -EAGAIN;
return 0;
@@ -766,6 +721,13 @@ static int exynos4_bus_get_dev_status(struct device *dev,
static void exynos4_bus_exit(struct device *dev)
{
+ struct busfreq_data *data = dev_get_drvdata(dev);
+ int i;
+
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->ppmu[i].hw_base)
+ iounmap(data->ppmu[i].hw_base);
+ }
}
static struct devfreq_dev_profile exynos4_devfreq_profile = {
@@ -1025,6 +987,39 @@ static struct of_device_id exynos4_busfreq_id_match[] = {
},
};
+static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
+{
+ struct device *dev = data->dev;
+ struct device_node *np = dev->of_node;
+ int i, ret;
+
+ if (!np) {
+ dev_err(dev, "Failed to find devicetree node\n");
+ return -EINVAL;
+ }
+
+ /* Maps the memory mapped IO to control PPMU register */
+ for (i = 0; i < PPMU_END; i++) {
+ data->ppmu[i].hw_base = of_iomap(np, i);
+ if (IS_ERR_OR_NULL(data->ppmu[i].hw_base)) {
+ dev_err(dev, "Failed to map memory region\n");
+ data->ppmu[i].hw_base = NULL;
+ ret = -EINVAL;
+ goto err_iomap;
+ }
+ }
+
+ return 0;
+
+err_iomap:
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->ppmu[i].hw_base)
+ iounmap(data->ppmu[i].hw_base);
+ }
+
+ return ret;
+}
+
static int exynos4_busfreq_get_driver_data(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1042,7 +1037,7 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
struct busfreq_data *data;
struct dev_pm_opp *opp;
struct device *dev = &pdev->dev;
- int err = 0;
+ int i, err = 0;
data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
if (data == NULL) {
@@ -1051,10 +1046,16 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
}
data->type = exynos4_busfreq_get_driver_data(pdev);
- data->dmc[0].hw_base = S5P_VA_DMC0;
- data->dmc[1].hw_base = S5P_VA_DMC1;
data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
data->dev = dev;
+
+ /* Parse dt data to get register/regulator */
+ err = exynos4_busfreq_parse_dt(data);
+ if (err < 0) {
+ dev_err(dev, "Failed to parse dt for resource\n");
+ return err;
+ }
+
mutex_init(&data->lock);
switch (data->type) {
@@ -1102,12 +1103,20 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
- busfreq_mon_reset(data);
-
+ /* Reigster Exynos4's devfreq instance with 'simple_ondemand' gov */
data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
"simple_ondemand", NULL);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
+ if (IS_ERR(data->devfreq)) {
+ dev_err(dev, "Failed to add devfreq device\n");
+ err = PTR_ERR(data->devfreq);
+ goto err_devfreq;
+ }
+
+ /*
+ * Start PPMU(Performance Profiling Monitoring Unit) to check
+ * utilization of each IP in the Exynos4 SoC.
+ */
+ busfreq_mon_reset(data);
/* Register opp_notifier for Exynos4 busfreq */
err = devfreq_register_opp_notifier(dev, data->devfreq);
@@ -1128,9 +1137,22 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
err_notifier_pm:
devfreq_unregister_opp_notifier(dev, data->devfreq);
err_notifier_opp:
+ /*
+ * The devfreq_remove_device() would execute finally devfreq->profile
+ * ->exit(). To avoid duplicate resource free operation, return directly
+ * before executing resource free below 'err_devfreq' goto statement.
+ */
devfreq_remove_device(data->devfreq);
return err;
+
+err_devfreq:
+ for (i = 0; i < PPMU_END; i++) {
+ if (data->ppmu[i].hw_base)
+ iounmap(data->ppmu[i].hw_base);
+ }
+
+ return err;
}
static int exynos4_busfreq_remove(struct platform_device *pdev)
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists