| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53247106.3060408@kernel.org>
Date: Sat, 15 Mar 2014 15:25:58 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Sebastian Reichel <sre@...ian.org>,
Sebastian Reichel <sre@...g0.de>,
Marek Belisko <marek@...delico.com>
CC: Lee Jones <lee.jones@...aro.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Grant Likely <grant.likely@...aro.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-iio@...r.kernel.org
Subject: Re: [PATCHv2 3/9] mfd: twl4030-madc: Cleanup driver
On 04/03/14 22:05, Sebastian Reichel wrote:
> Some style fixes in twl4030-madc driver.
>
> Reported-by: Jonathan Cameron <jic23@...nel.org>
Gah - not sure I want to be known for reporting style
issues :)
> Signed-off-by: Sebastian Reichel <sre@...ian.org>
> Acked-by: Lee Jones <lee.jones@...aro.org>
Looks good - one little whilst you are here comment below.
Acked-by: Jonathan Cameron <jic23@...nel.org>
whether you do that or not. We can hardly hold there being
remaining style issues against a style cleanup patch ;)
> ---
> drivers/mfd/twl4030-madc.c | 125 +++++++++++++++++++--------------------
> include/linux/i2c/twl4030-madc.h | 2 +-
> 2 files changed, 61 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
> index 0479af0..f37da65 100644
> --- a/drivers/mfd/twl4030-madc.c
> +++ b/drivers/mfd/twl4030-madc.c
> @@ -49,22 +49,22 @@
>
> #include <linux/iio/iio.h>
>
> -/*
> +/**
> * struct twl4030_madc_data - a container for madc info
> - * @dev - pointer to device structure for madc
> - * @lock - mutex protecting this data structure
> - * @requests - Array of request struct corresponding to SW1, SW2 and RT
> - * @use_second_irq - IRQ selection (main or co-processor)
> - * @imr - Interrupt mask register of MADC
> - * @isr - Interrupt status register of MADC
> + * @dev: Pointer to device structure for madc
> + * @lock: Mutex protecting this data structure
> + * @requests: Array of request struct corresponding to SW1, SW2 and RT
> + * @use_second_irq: IRQ selection (main or co-processor)
> + * @imr: Interrupt mask register of MADC
> + * @isr: Interrupt status register of MADC
> */
> struct twl4030_madc_data {
> struct device *dev;
> struct mutex lock; /* mutex protecting this data structure */
> struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
> bool use_second_irq;
> - int imr;
> - int isr;
> + u8 imr;
> + u8 isr;
> };
>
> static int twl4030_madc_read(struct iio_dev *iio_dev,
> @@ -155,17 +155,16 @@ twl4030_divider_ratios[16] = {
> };
>
>
> -/*
> - * Conversion table from -3 to 55 degree Celcius
> - */
> -static int therm_tbl[] = {
> -30800, 29500, 28300, 27100,
> -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
> -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
> -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
> -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
> -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
> -4040, 3910, 3790, 3670, 3550
> +/* Conversion table from -3 to 55 degrees Celcius */
> +static int twl4030_therm_tbl[] = {
> + 30800, 29500, 28300, 27100,
> + 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700,
> + 17900, 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100,
> + 12600, 12100, 11600, 11200, 10800, 10400, 10000, 9630, 9280,
> + 8950, 8620, 8310, 8020, 7730, 7460, 7200, 6950, 6710,
> + 6470, 6250, 6040, 5830, 5640, 5450, 5260, 5090, 4920,
> + 4760, 4600, 4450, 4310, 4170, 4040, 3910, 3790, 3670,
> + 3550
> };
>
> /*
> @@ -197,11 +196,12 @@ const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
> },
> };
>
> -/*
> - * Function to read a particular channel value.
> - * @madc - pointer to struct twl4030_madc_data
> - * @reg - lsb of ADC Channel
> - * If the i2c read fails it returns an error else returns 0.
> +/**
> + * twl4030_madc_channel_raw_read() - Function to read a particular channel value
> + * @madc: pointer to struct twl4030_madc_data
> + * @reg: lsb of ADC Channel
> + *
> + * Return: 0 on success, an error code otherwise.
> */
> static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
> {
> @@ -227,7 +227,7 @@ static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
> }
>
> /*
> - * Return battery temperature
> + * Return battery temperature in degrees Celsius
> * Or < 0 on failure.
> */
> static int twl4030battery_temperature(int raw_volt)
> @@ -236,18 +236,18 @@ static int twl4030battery_temperature(int raw_volt)
> int temp, curr, volt, res, ret;
>
> volt = (raw_volt * TEMP_STEP_SIZE) / TEMP_PSR_R;
> - /* Getting and calculating the supply current in micro ampers */
> + /* Getting and calculating the supply current in micro amperes */
> ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val,
> REG_BCICTL2);
> if (ret < 0)
> return ret;
> +
> curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10;
> /* Getting and calculating the thermistor resistance in ohms */
> res = volt * 1000 / curr;
> /* calculating temperature */
> for (temp = 58; temp >= 0; temp--) {
> - int actual = therm_tbl[temp];
> -
> + int actual = twl4030_therm_tbl[temp];
> if ((actual - res) >= 0)
> break;
> }
> @@ -269,11 +269,12 @@ static int twl4030battery_current(int raw_volt)
> else /* slope of 0.88 mV/mA */
> return (raw_volt * CURR_STEP_SIZE) / CURR_PSR_R2;
> }
> +
> /*
> * Function to read channel values
> * @madc - pointer to twl4030_madc_data struct
> * @reg_base - Base address of the first channel
> - * @Channels - 16 bit bitmap. If the bit is set, channel value is read
> + * @Channels - 16 bit bitmap. If the bit is set, channel's value is read
> * @buf - The channel values are stored here. if read fails error
> * @raw - Return raw values without conversion
> * value is stored
> @@ -284,17 +285,17 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
> long channels, int *buf,
> bool raw)
> {
> - int count = 0, count_req = 0, i;
> + int count = 0;
> + int i;
> u8 reg;
>
> for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
> - reg = reg_base + 2 * i;
> + reg = reg_base + (2 * i);
> buf[i] = twl4030_madc_channel_raw_read(madc, reg);
> if (buf[i] < 0) {
> - dev_err(madc->dev,
> - "Unable to read register 0x%X\n", reg);
> - count_req++;
> - continue;
> + dev_err(madc->dev, "Unable to read register 0x%X\n",
> + reg);
> + return buf[i];
> }
> if (raw) {
> count++;
> @@ -305,7 +306,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
> buf[i] = twl4030battery_current(buf[i]);
> if (buf[i] < 0) {
> dev_err(madc->dev, "err reading current\n");
> - count_req++;
> + return buf[i];
> } else {
> count++;
> buf[i] = buf[i] - 750;
> @@ -315,7 +316,7 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
> buf[i] = twl4030battery_temperature(buf[i]);
> if (buf[i] < 0) {
> dev_err(madc->dev, "err reading temperature\n");
> - count_req++;
> + return buf[i];
> } else {
> buf[i] -= 3;
> count++;
> @@ -336,8 +337,6 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
> twl4030_divider_ratios[i].numerator);
> }
> }
> - if (count_req)
> - dev_err(madc->dev, "%d channel conversion failed\n", count_req);
>
> return count;
> }
> @@ -361,13 +360,13 @@ static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id)
> madc->imr);
> return ret;
> }
> +
> val &= ~(1 << id);
> ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr);
> if (ret) {
> dev_err(madc->dev,
> "unable to write imr register 0x%X\n", madc->imr);
> return ret;
> -
> }
>
> return 0;
> @@ -430,7 +429,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
> continue;
> ret = twl4030_madc_disable_irq(madc, i);
> if (ret < 0)
> - dev_dbg(madc->dev, "Disable interrupt failed%d\n", i);
> + dev_dbg(madc->dev, "Disable interrupt failed %d\n", i);
> madc->requests[i].result_pending = 1;
> }
> for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) {
> @@ -512,21 +511,17 @@ static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc,
> {
> const struct twl4030_madc_conversion_method *method;
> int ret = 0;
> +
> + if (conv_method != TWL4030_MADC_SW1 && conv_method != TWL4030_MADC_SW2)
> + return -ENOTSUPP;
> +
> method = &twl4030_conversion_methods[conv_method];
> - switch (conv_method) {
> - case TWL4030_MADC_SW1:
> - case TWL4030_MADC_SW2:
> - ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
> - TWL4030_MADC_SW_START, method->ctrl);
> - if (ret) {
> - dev_err(madc->dev,
> - "unable to write ctrl register 0x%X\n",
> - method->ctrl);
> - return ret;
> - }
> - break;
> - default:
> - break;
> + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, TWL4030_MADC_SW_START,
> + method->ctrl);
> + if (ret) {
> + dev_err(madc->dev, "unable to write ctrl register 0x%X\n",
> + method->ctrl);
> + return ret;
> }
>
> return 0;
> @@ -623,8 +618,8 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
> ch_lsb, method->avg);
> if (ret) {
> dev_err(twl4030_madc->dev,
> - "unable to write sel reg 0x%X\n",
> - method->sel + 1);
> + "unable to write avg reg 0x%X\n",
> + method->avg);
> goto out;
> }
> }
> @@ -665,10 +660,6 @@ out:
> }
> EXPORT_SYMBOL_GPL(twl4030_madc_conversion);
>
> -/*
> - * Return channel value
> - * Or < 0 on failure.
> - */
> int twl4030_get_madc_conversion(int channel_no)
> {
> struct twl4030_madc_request req;
> @@ -703,6 +694,7 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
> int chan, int on)
> {
> int ret;
> + int regmask;
> u8 regval;
>
> ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE,
> @@ -712,10 +704,13 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
> TWL4030_BCI_BCICTL1);
> return ret;
> }
> +
> + regmask = chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
> if (on)
> - regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN;
> + regval |= regmask;
> else
> - regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN;
> + regval &= ~regmask;
> +
> ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
> regval, TWL4030_BCI_BCICTL1);
> if (ret) {
> @@ -730,7 +725,7 @@ static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc,
> /*
If you are cleaning up anyway. Lets put this in kernel doc format.
> * Function that sets MADC software power on bit to enable MADC
> * @madc - pointer to twl4030_madc_data struct
> - * @on - Enable or disable MADC software powen on bit.
> + * @on - Enable or disable MADC software power on bit.
> * returns error if i2c read/write fails else 0
> */
> static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on)
> diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
> index 01f5951..1c0134d 100644
> --- a/include/linux/i2c/twl4030-madc.h
> +++ b/include/linux/i2c/twl4030-madc.h
> @@ -44,7 +44,7 @@ struct twl4030_madc_conversion_method {
>
> struct twl4030_madc_request {
> unsigned long channels;
> - u16 do_avg;
> + bool do_avg;
> u16 method;
> u16 type;
> bool active;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists