early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel KASLR using RDTSC... Decompressing Linux... Parsing ELF... Performing relocations... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-next-20140313-08623-gaf911c6 (kbuild@lkp-st01) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 PREEMPT Sat Mar 15 00:47:58 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [c00fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x13ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0f200000-0x0f3fffff] [ 0.000000] [mem 0x0f200000-0x0f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f1fffff] [ 0.000000] [mem 0x0c000000-0x0f1fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0f400000-0x13ffdfff] [ 0.000000] [mem 0x0f400000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffff8000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] clearing pte for ram above max_low_pfn: pfn: 13ffe pmd: d29c94f8 pmd phys: 129c94f8 pte: d3a40ff0 pte phys: 13a40ff0 [ 0.000000] clearing pte for ram above max_low_pfn: pfn: 13fff pmd: d29c94f8 pmd phys: 129c94f8 pte: d3a40ff8 pte phys: 13a40ff8 [ 0.000000] BRK [0x13a42000, 0x13a42fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat d2889420, node_mem_map cf180020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffff8000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffff7000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 12347780 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-st0-03150024/next:master/.vmlinuz-af911c69655709defa3daa926d72d5447688754c-20140315004838-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-st0-03150024/af911c69655709defa3daa926d72d5447688754c/vmlinuz-3.14.0-rc6-next-20140313-08623-gaf911c6 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 248940K/327280K available (36499K kernel code, 5598K rwdata, 11588K rodata, 1244K init, 16224K bss, 78340K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff89000 - 0xfffff000 ( 472 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xffbfe000 ( 692 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xd2892000 - 0xd29c9000 (1244 kB) [ 0.000000] .data : 0xd17a519c - 0xd2890b40 (17326 kB) [ 0.000000] .text : 0xcf400000 - 0xd17a519c (36500 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=cec0a000 soft=cec0c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-next-20140313-08623-gaf911c6 (kbuild@lkp-st01) (gcc version 4.8.1 (Debian 4.8.1-8) ) #2 PREEMPT Sat Mar 15 00:47:58 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [c00fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] initial memory mapped: [mem 0x00000000-0x13ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0f200000-0x0f3fffff] [ 0.000000] [mem 0x0f200000-0x0f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f1fffff] [ 0.000000] [mem 0x0c000000-0x0f1fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0f400000-0x13ffdfff] [ 0.000000] [mem 0x0f400000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffff8000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock [ 0.000000] clearing pte for ram above max_low_pfn: pfn: 13ffe pmd: d29c94f8 pmd phys: 129c94f8 pte: d3a40ff0 pte phys: 13a40ff0 [ 0.000000] clearing pte for ram above max_low_pfn: pfn: 13fff pmd: d29c94f8 pmd phys: 129c94f8 pte: d3a40ff8 pte phys: 13a40ff8 [ 0.000000] BRK [0x13a42000, 0x13a42fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat d2889420, node_mem_map cf180020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffff8000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffff7000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 12347780 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-st0-03150024/next:master/.vmlinuz-af911c69655709defa3daa926d72d5447688754c-20140315004838-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-st0-03150024/af911c69655709defa3daa926d72d5447688754c/vmlinuz-3.14.0-rc6-next-20140313-08623-gaf911c6 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 248940K/327280K available (36499K kernel code, 5598K rwdata, 11588K rodata, 1244K init, 16224K bss, 78340K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff89000 - 0xfffff000 ( 472 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xffbfe000 ( 692 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xd2892000 - 0xd29c9000 (1244 kB) [ 0.000000] .data : 0xd17a519c - 0xd2890b40 (17326 kB) [ 0.000000] .text : 0xcf400000 - 0xd17a519c (36500 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=cec0a000 soft=cec0c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3807 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | |failed| [ 0.000000] recursive read-lock #2: | ok | |failed| [ 0.000000] mixed read-write-lock: |failed| |failed| [ 0.000000] mixed write-read-lock: |failed| |failed| [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.000000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.000000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.000000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.000000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.000000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.000000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing:failed| ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context:failed| ok | ok | [ 0.000000] try:failed| ok |failed| [ 0.000000] block:failed| ok |failed| [ 0.000000] spinlock:failed| ok |failed| [ 0.000000] -------------------------------------------------------- [ 0.000000] 141 out of 253 testcases failed, as expected. | [ 0.000000] ---------------------------------------------------- [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2494.156 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 4988.31 BogoMIPS (lpj=2494156) [ 0.003680] pid_max: default: 32768 minimum: 301 [ 0.004033] ACPI: Core revision 20140214 [ 0.008143] ACPI: All ACPI Tables successfully acquired [ 0.009097] Security Framework initialized [ 0.009774] AppArmor: AppArmor initialized [ 0.010007] Yama: becoming mindful. [ 0.011043] Mount-cache hash table entries: 512 [ 0.012401] Initializing cgroup subsys debug [ 0.013013] Initializing cgroup subsys devices [ 0.013717] Initializing cgroup subsys net_cls [ 0.014011] Initializing cgroup subsys net_prio [ 0.015082] mce: CPU supports 10 MCE banks [ 0.016071] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.016071] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.016071] tlb_flushall_shift: 6 [ 0.017007] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.024104] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.026506] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.027009] Getting VERSION: 50014 [ 0.027596] Getting VERSION: 50014 [ 0.028008] Getting ID: 0 [ 0.029013] Getting ID: f000000 [ 0.029574] Getting LVT0: 8700 [ 0.030015] Getting LVT1: 8400 [ 0.030591] enabled ExtINT on CPU#0 [ 0.032255] ENABLING IO-APIC IRQs [ 0.032833] init IO_APIC IRQs [ 0.033008] apic 0 pin 0 not connected [ 0.034020] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.035028] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.036027] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.037025] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.038026] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.039026] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.040031] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.041027] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.042026] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.043026] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.044025] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.045026] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.046026] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.047026] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.048026] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.049023] apic 0 pin 16 not connected [ 0.049658] apic 0 pin 17 not connected [ 0.050006] apic 0 pin 18 not connected [ 0.051006] apic 0 pin 19 not connected [ 0.051646] apic 0 pin 20 not connected [ 0.052005] apic 0 pin 21 not connected [ 0.053006] apic 0 pin 22 not connected [ 0.053649] apic 0 pin 23 not connected [ 0.054150] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055005] Using local APIC timer interrupts. [ 0.055005] calibrating APIC timer ... [ 0.057000] ... lapic delta = 6249986 [ 0.057000] ... PM-Timer delta = 357966 [ 0.057000] ... PM-Timer result ok [ 0.057000] ..... delta 6249986 [ 0.057000] ..... mult: 268434854 [ 0.057000] ..... calibration result: 999997 [ 0.057000] ..... CPU clock speed is 2494.0054 MHz. [ 0.057000] ..... host bus clock speed is 999.0997 MHz. [ 0.057443] devtmpfs: initialized [ 0.058354] gcov: version magic: 0x3430382a [ 0.064555] xor: measuring software checksum speed [ 0.075005] pIII_sse : 140.000 MB/sec [ 0.085029] prefetch64-sse: 140.000 MB/sec [ 0.085910] xor: using function: prefetch64-sse (140.000 MB/sec) [ 0.086009] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.087333] regulator-dummy: no parameters [ 0.088250] NET: Registered protocol family 16 [ 0.090971] cpuidle: using governor ladder [ 0.091007] cpuidle: using governor menu [ 0.093749] ACPI: bus type PCI registered [ 0.094089] dca service started, version 1.12.1 [ 0.095423] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.096011] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.097004] PCI: Using configuration type 1 for base access [ 0.161067] raid6: mmxx1 718 MB/s [ 0.178077] raid6: mmxx2 781 MB/s [ 0.195067] raid6: sse1x1 570 MB/s [ 0.212064] raid6: sse1x2 734 MB/s [ 0.229030] raid6: sse2x1 1128 MB/s [ 0.246026] raid6: sse2x2 1460 MB/s [ 0.246798] raid6: using algorithm sse2x2 (1460 MB/s) [ 0.247004] raid6: using intx1 recovery algorithm [ 0.249056] ACPI: Added _OSI(Module Device) [ 0.249903] ACPI: Added _OSI(Processor Device) [ 0.250006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.251006] ACPI: Added _OSI(Processor Aggregator Device) [ 0.262275] ACPI: Interpreter enabled [ 0.263012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.264546] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.266587] ACPI: (supports S0 S3 S5) [ 0.267005] ACPI: Using IOAPIC for interrupt routing [ 0.268056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.281924] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.282014] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.283026] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.285028] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.286130] PCI host bridge to bus 0000:00 [ 0.287008] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.288006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.289006] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.290006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.291006] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.292069] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.293689] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.295678] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.299007] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.301447] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.303027] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.304017] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.306287] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.309046] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.311596] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.318085] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.320513] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.322432] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.324438] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.329430] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.331404] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.332462] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.336433] pci_bus 0000:00: on NUMA node 0 [ 0.338202] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.339782] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.341466] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.343109] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.344570] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.346728] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.349099] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.350008] vgaarb: loaded [ 0.351004] vgaarb: bridge control possible 0000:00:02.0 [ 0.353620] SCSI subsystem initialized [ 0.354080] libata version 3.00 loaded. [ 0.355194] ACPI: bus type USB registered [ 0.356113] usbcore: registered new interface driver usbfs [ 0.357059] usbcore: registered new interface driver hub [ 0.358091] usbcore: registered new device driver usb [ 0.359142] Linux video capture interface: v2.00 [ 0.360074] pps_core: LinuxPPS API ver. 1 registered [ 0.361008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.362052] PTP clock support registered [ 0.363070] EDAC MC: Ver: 3.0.0 [ 0.364612] PCI: Using ACPI for IRQ routing [ 0.365013] PCI: pci_cache_line_size set to 64 bytes [ 0.366140] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.367020] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.369519] NET: Registered protocol family 23 [ 0.370078] Bluetooth: Core ver 2.19 [ 0.371048] NET: Registered protocol family 31 [ 0.372007] Bluetooth: HCI device and connection manager initialized [ 0.373026] Bluetooth: HCI socket layer initialized [ 0.374023] Bluetooth: L2CAP socket layer initialized [ 0.375070] Bluetooth: SCO socket layer initialized [ 0.376028] NET: Registered protocol family 8 [ 0.377008] NET: Registered protocol family 20 [ 0.378558] nfc: nfc_init: NFC Core ver 0.1 [ 0.379060] NET: Registered protocol family 39 [ 0.381051] cfg80211: Calling CRDA to update world regulatory domain [ 0.383160] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.384075] Switched to clocksource kvm-clock [ 0.385438] AppArmor: AppArmor Filesystem Enabled [ 0.386417] pnp: PnP ACPI init [ 0.387144] ACPI: bus type PNP registered [ 0.388072] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.389727] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.390990] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.392643] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.393887] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.395543] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.396806] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.398372] pnp 00:03: [dma 2] [ 0.399123] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.400398] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.402036] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.403319] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.404967] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.406686] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.408151] pnp: PnP ACPI: found 7 devices [ 0.408989] ACPI: bus type PNP unregistered [ 0.704042] mdacon: MDA with 8K of memory detected. [ 0.704103] Console: switching consoles 13-16 to MDA-2 [ 0.741114] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.742201] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.743249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.744398] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.745601] NET: Registered protocol family 1 [ 0.746512] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.747625] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.748713] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.749878] pci 0000:00:02.0: Boot video device [ 0.750804] PCI: CLS 0 bytes, default 64 [ 0.751936] Unpacking initramfs... [ 0.874897] Freeing initrd memory: 3276K (d3cbd000 - d3ff0000) [ 0.877438] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 0.878650] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.882601] PCLMULQDQ-NI instructions are not detected. [ 0.883678] NatSemi SCx200 Driver [ 0.886956] futex hash table entries: 256 (order: 1, 12288 bytes) [ 0.888171] Initialise system trusted keyring [ 0.889173] audit: initializing netlink subsys (disabled) [ 0.890312] audit: type=2000 audit(1394815747.960:1): initialized [ 1.880432] tsc: Refined TSC clocksource calibration: 2493.969 MHz [ 2.015319] VFS: Disk quotas dquot_6.5.2 [ 2.016173] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.017674] NTFS driver 2.1.30 [Flags: R/O DEBUG]. [ 2.018690] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 2.021087] QNX6 filesystem 1.0.0 registered. [ 2.022079] fuse init (API version 7.22) [ 2.023169] JFS: nTxBlock = 1970, nTxLock = 15763 [ 2.025691] SGI XFS with ACLs, security attributes, realtime, debug enabled [ 2.027337] NILFS version 2 loaded [ 2.028322] OCFS2 User DLM kernel interface loaded [ 2.029958] msgmni has been set to 492 [ 2.036231] alg: No test for crc32 (crc32-table) [ 2.037573] alg: No test for lz4 (lz4-generic) [ 2.038592] alg: No test for stdrng (krng) [ 2.048845] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 2.050134] async_tx: api initialized (async) [ 2.051037] Key type asymmetric registered [ 2.051889] Asymmetric key parser 'x509' registered [ 2.052923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.054477] io scheduler noop registered [ 2.055290] io scheduler deadline registered [ 2.056192] io scheduler cfq registered (default) [ 2.057157] list_sort_test: start testing list_sort() [ 2.058962] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 2.059948] crc32: self tests passed, processed 225944 bytes in 155448 nsec [ 2.061363] crc32c: CRC_LE_BITS = 64 [ 2.062114] crc32c: self tests passed, processed 225944 bytes in 80074 nsec [ 2.302844] crc32_combine: 8373 self tests passed [ 2.545543] crc32c_combine: 8373 self tests passed [ 2.546516] rbtree testing -> 10104 cycles [ 3.002867] augmented rbtree testing -> 15446 cycles [ 3.688744] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.689813] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 3.691226] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.692413] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 3.693671] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 3.695169] cpcihp_generic: not configured, disabling. [ 3.696185] Console: switching consoles 13-16 to MDA-2 [ 3.697942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.699422] ACPI: Power Button [PWRF] [ 3.700626] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.701966] xenfs: not registering filesystem on non-xen platform [ 3.743419] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 3.744472] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.767492] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.770864] serial: Freescale lpuart driver [ 3.771856] MOXA Smartio/Industio family driver version 2.0.5 [ 3.772990] Initializing Nozomi driver 2.1d [ 3.773909] RocketPort device driver module, version 2.09, 12-June-2003 [ 3.775128] No rocketport ports found; unloading driver [ 3.776116] SyncLink GT [ 3.776716] SyncLink GT, tty major#241 [ 3.777529] SyncLink GT no devices found [ 3.778335] SyncLink MultiPort driver $Revision: 4.38 $ [ 3.789675] SyncLink MultiPort driver $Revision: 4.38 $, tty major#240 [ 3.791162] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 3.792474] ac.o: No PCI boards found. [ 3.793259] ac.o: For an ISA board you must supply memory and irq parameters. [ 3.794524] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 3.795754] Non-volatile memory driver v1.3 [ 3.796811] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 3.797804] smapi::smapi_init, ERROR invalid usSmapiID [ 3.798779] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 3.800502] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 3.801924] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 3.803061] Linux agpgart interface v0.103 [ 3.804464] SyncLink PC Card driver $Revision: 4.34 $, tty major#238 [ 3.806015] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 3.807446] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 3.809054] c2port c2port0: C2 port uc added [ 3.809913] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 3.811767] Guest personality initialized and is inactive [ 3.812922] VMCI host device registered (name=vmci, major=10, minor=60) [ 3.814123] Initialized host personality [ 3.815097] usbcore: registered new interface driver rtsx_usb [ 3.816714] usbcore: registered new interface driver pn533 [ 3.818248] usbcore: registered new interface driver port100 [ 3.819354] usbcore: registered new interface driver nfcmrvl [ 3.820414] Uniform Multi-Platform E-IDE driver [ 3.822298] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.824144] ide-gd driver 1.18 [ 3.825235] Loading iSCSI transport class v2.0-870. [ 3.826485] hp_sw: device handler registered [ 3.827359] alua: device handler registered [ 3.828412] fnic: Cisco FCoE HBA Driver, ver 1.5.0.45 [ 3.829519] fnic: Successfully Initialized Trace Buffer [ 3.830730] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.2 (Dec 11, 2013) [ 3.834004] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 3.835058] Detecting Adaptec I2O RAID controllers... [ 3.836903] Adaptec aacraid driver 1.2-0[30200]-ms [ 3.837946] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 3.839449] scsi: Detection failed (no card) [ 3.840493] sym53c416.c: Version 1.0.0-ac [ 3.841382] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options [ 3.843117] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 3.845084] iscsi: registered transport (qla4xxx) [ 3.846052] QLogic iSCSI HBA Driver [ 3.846797] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 [ 3.930408] DC390: clustering now enabled by default. If you get problems load [ 3.931870] with "disable_clustering=1" and report to maintainers [ 3.933136] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.934677] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.935985] mpt2sas version 16.100.00.00 loaded [ 3.937043] mpt3sas version 02.100.00.00 loaded [ 3.938166] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 3.939682] nsp32: loading... [ 3.940397] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012) [ 3.941980] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 3.943032] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 3.944280] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013) [ 3.945607] iscsi: registered transport (bnx2i) [ 3.946611] iscsi: registered transport (be2iscsi) [ 3.947551] In beiscsi_module_init, tt=d2641b20 [ 3.948797] SCSI Media Changer driver v0.25 [ 3.949783] osd: LOADED open-osd 0.2.1 [ 3.957945] scsi_debug: host protection [ 3.958764] scsi2 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0 [ 3.960920] scsi 2:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 [ 3.963203] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.965150] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 3.966475] sd 2:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 3.968291] sd 2:0:0:0: [sda] Write Protect is off [ 3.969236] sd 2:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 3.970746] slram: not enough parameters. [ 3.971587] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 3.973100] pmc551: not detected [ 3.975137] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.976975] ftl_cs: FTL header not found. [ 3.981301] HSI/SSI char device loaded [ 3.983262] sda: unknown partition table [ 3.985073] arcnet loaded. [ 3.985871] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 3.987156] arcnet: raw mode (`r') encapsulation support loaded. [ 3.988315] arcnet: cap mode (`c') encapsulation support loaded. [ 3.989511] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.990427] arcnet: COM90xx chipset support [ 4.291840] S3: No ARCnet cards found. [ 4.292668] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 4.294102] E-mail me if you actually test this driver, please! [ 4.295190] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 4.296873] vcan: Virtual CAN interface driver [ 4.297798] CAN device driver interface [ 4.298647] usbcore: registered new interface driver ems_usb [ 4.299742] usbcore: registered new interface driver kvaser_usb [ 4.300883] usbcore: registered new interface driver usb_8dev [ 4.301965] sja1000 CAN netdevice driver [ 4.302771] sja1000_isa: insufficient parameters supplied [ 4.304275] cc770: CAN netdevice driver [ 4.305064] cc770_isa: insufficient parameters supplied [ 4.306333] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.19 (December 19, 2013) [ 4.309663] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.19-0 (2014/02/10) [ 4.311693] Brocade 10G Ethernet driver - version: 3.2.23.0 [ 4.313412] QLogic/NetXen Network Driver v4.0.82 [ 4.314622] Solarflare NET driver v4.0 [ 4.315536] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 4.316623] tehuti: Options: hw_csum [ 4.317433] tlan: ThunderLAN driver v1.17 [ 4.318306] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 4.319367] AX.25: Z8530 SCC driver version 3.0.dl1bke [ 4.320690] YAM driver version 0.8 by F1OAT/F6FBB [ 4.322759] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 4.322759] baycom_ser_fdx: version 0.10 [ 4.325790] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 4.326864] hdlcdrv: version 0.8 [ 4.327608] usbcore: registered new interface driver irda-usb [ 4.329292] usbcore: registered new interface driver mcs7780 [ 4.330522] usbcore: registered new interface driver kingsun-sir [ 4.331683] usbcore: registered new interface driver ksdazzle-sir [ 4.332844] usbcore: registered new interface driver ks959-sir [ 4.333961] PPP generic driver version 2.4.2 [ 4.334980] PPP BSD Compression module registered [ 4.335919] PPP MPPE Compression module registered [ 4.336859] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 4.338117] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 4.339349] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 4.340498] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kq [ 4.341761] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 4.342896] libipw: 802.11 data/management/control stack, git-1.1.13 [ 4.344058] libipw: Copyright (C) 2004-2005 Intel Corporation [ 4.345623] orinoco 0.15 (David Gibson , Pavel Roskin , et al) [ 4.347480] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger ) [ 4.349210] usbcore: registered new interface driver orinoco_usb [ 4.350358] airo(): Probing for PCI adapters [ 4.351258] airo(): Finished probing for PCI adapters [ 4.352316] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 4.353413] usbcore: registered new interface driver at76c50x-usb [ 4.354573] Broadcom 43xx-legacy driver loaded [ Features: PLD ] [ 4.355981] usbcore: registered new interface driver rndis_wlan [ 4.357148] usbcore: registered new interface driver usb8xxx [ 4.358260] libertas_spi: Libertas SPI driver [ 4.359257] usbcore: registered new interface driver lbtf_usb [ 4.360441] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 4.361510] Copyright(c) 2003- 2014 Intel Corporation [ 4.362580] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 4.363827] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 4.364955] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 4.366666] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 4.367952] usbcore: registered new interface driver rt2500usb [ 4.369076] usbcore: registered new interface driver rt2800usb [ 4.370418] usbcore: registered new interface driver i2400m_usb [ 4.371571] usbcore: registered new interface driver kaweth [ 4.372624] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.374117] usbcore: registered new interface driver pegasus [ 4.375211] usbcore: registered new interface driver r8152 [ 4.376286] usbcore: registered new interface driver asix [ 4.377349] usbcore: registered new interface driver ax88179_178a [ 4.378517] usbcore: registered new interface driver cdc_ether [ 4.379644] usbcore: registered new interface driver cdc_eem [ 4.380743] usbcore: registered new interface driver dm9601 [ 4.381831] usbcore: registered new interface driver smsc75xx [ 4.382944] usbcore: registered new interface driver smsc95xx [ 4.384045] usbcore: registered new interface driver gl620a [ 4.385130] usbcore: registered new interface driver net1080 [ 4.386239] usbcore: registered new interface driver plusb [ 4.387313] usbcore: registered new interface driver rndis_host [ 4.388449] usbcore: registered new interface driver cdc_subset [ 4.389585] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 4.391087] usbcore: registered new interface driver int51x1 [ 4.392186] usbcore: registered new interface driver cdc_phonet [ 4.393318] usbcore: registered new interface driver kalmia [ 4.394405] usbcore: registered new interface driver ipheth [ 4.395477] usbcore: registered new interface driver sierra_net [ 4.396617] usbcore: registered new interface driver cdc_ncm [ 4.397713] usbcore: registered new interface driver huawei_cdc_ncm [ 4.398898] usbcore: registered new interface driver lg-vl600 [ 4.400007] usbcore: registered new interface driver qmi_wwan [ 4.401110] usbcore: registered new interface driver cdc_mbim [ 4.402250] Madge ATM Ambassador driver version 1.2.4 [ 4.403225] amb: debug bitmap is 0 [ 4.403996] Madge ATM Horizon [Ultra] driver version 1.2.1 [ 4.405030] hrz: debug bitmap is 0 [ 4.405898] idt77252_init: at d2926f60 [ 4.406735] adummy: version 1.0 [ 4.408059] Databook TCIC-2 PCMCIA probe: not found. [ 4.409239] usbcore: registered new interface driver hwa-rc [ 4.410701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.411891] ehci-pci: EHCI PCI platform driver [ 4.412836] ehci-platform: EHCI generic platform driver [ 4.413933] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.415117] ohci-pci: OHCI PCI platform driver [ 4.416049] ohci-platform: OHCI generic platform driver [ 4.417089] uhci_hcd: USB Universal Host Controller Interface driver [ 4.418471] usbcore: registered new interface driver hwa-hc [ 4.419683] usbcore: registered new interface driver wusb-cbaf [ 4.420844] usbcore: registered new interface driver cdc_acm [ 4.421912] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.423511] usbcore: registered new interface driver usblp [ 4.424605] usbcore: registered new interface driver cdc_wdm [ 4.425709] usbcore: registered new interface driver usbtmc [ 4.426799] usbcore: registered new interface driver mdc800 [ 4.427845] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 4.429375] usbcore: registered new interface driver microtekX6 [ 4.430597] usbcore: registered new interface driver usbserial [ 4.431719] usbcore: registered new interface driver ark3116 [ 4.432838] usbserial: USB Serial support registered for ark3116 [ 4.433992] usbcore: registered new interface driver belkin_sa [ 4.435109] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 4.436864] usbcore: registered new interface driver ch341 [ 4.437926] usbserial: USB Serial support registered for ch341-uart [ 4.439096] usbcore: registered new interface driver cp210x [ 4.440175] usbserial: USB Serial support registered for cp210x [ 4.441302] usbcore: registered new interface driver cyberjack [ 4.442421] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 4.444089] usbcore: registered new interface driver cypress_m8 [ 4.445212] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 4.446678] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 4.448169] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 4.449655] usbcore: registered new interface driver digi_acceleport [ 4.450844] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 4.452334] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 4.453822] usbcore: registered new interface driver io_edgeport [ 4.454973] usbserial: USB Serial support registered for Edgeport 2 port adapter [ 4.456470] usbserial: USB Serial support registered for Edgeport 4 port adapter [ 4.457959] usbserial: USB Serial support registered for Edgeport 8 port adapter [ 4.459451] usbserial: USB Serial support registered for EPiC device [ 4.460642] usbcore: registered new interface driver io_ti [ 4.461707] usbserial: USB Serial support registered for Edgeport TI 1 port adapter [ 4.463253] usbserial: USB Serial support registered for Edgeport TI 2 port adapter [ 4.464784] usbcore: registered new interface driver empeg [ 4.465856] usbserial: USB Serial support registered for empeg [ 4.466989] usbcore: registered new interface driver f81232 [ 4.468069] usbserial: USB Serial support registered for f81232 [ 4.469191] usbcore: registered new interface driver ftdi_sio [ 4.470502] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.472364] usbcore: registered new interface driver garmin_gps [ 4.473496] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 4.474776] usbcore: registered new interface driver ipw [ 4.475819] usbserial: USB Serial support registered for IPWireless converter [ 4.477141] usbcore: registered new interface driver ir_usb [ 4.478238] usbserial: USB Serial support registered for IR Dongle [ 4.479408] usbcore: registered new interface driver keyspan [ 4.480506] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 4.482076] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 4.483558] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 4.485044] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 4.486547] usbcore: registered new interface driver keyspan_pda [ 4.487681] usbserial: USB Serial support registered for Keyspan PDA [ 4.488883] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration) [ 4.490473] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) [ 4.492193] usbcore: registered new interface driver kobil_sct [ 4.493316] usbserial: USB Serial support registered for KOBIL USB smart card terminal [ 4.496638] usbcore: registered new interface driver metro_usb [ 4.497759] usbserial: USB Serial support registered for Metrologic USB to Serial [ 4.499261] usbcore: registered new interface driver mos7720 [ 4.500353] usbserial: USB Serial support registered for Moschip 2 port adapter [ 4.501863] usbcore: registered new interface driver mxuport [ 4.502971] usbserial: USB Serial support registered for MOXA UPort [ 4.504156] usbcore: registered new interface driver opticon [ 4.505246] usbserial: USB Serial support registered for opticon [ 4.506389] usbcore: registered new interface driver option [ 4.507473] usbserial: USB Serial support registered for GSM modem (1-port) [ 4.508758] usbcore: registered new interface driver pl2303 [ 4.509839] usbserial: USB Serial support registered for pl2303 [ 4.510965] usbcore: registered new interface driver qcserial [ 4.512067] usbserial: USB Serial support registered for Qualcomm USB modem [ 4.513354] usbcore: registered new interface driver safe_serial [ 4.514499] usbserial: USB Serial support registered for safe_serial [ 4.515690] usbcore: registered new interface driver sierra [ 4.516764] usbserial: USB Serial support registered for Sierra USB modem [ 4.518022] usbcore: registered new interface driver spcp8x5 [ 4.519110] usbserial: USB Serial support registered for SPCP8x5 [ 4.520256] usbcore: registered new interface driver symbolserial [ 4.521413] usbserial: USB Serial support registered for symbol [ 4.522551] usbcore: registered new interface driver visor [ 4.523628] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 4.525172] usbserial: USB Serial support registered for Sony Clie 5.0 [ 4.526381] usbserial: USB Serial support registered for Sony Clie 3.5 [ 4.527593] usbcore: registered new interface driver whiteheat [ 4.528712] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 4.530459] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 4.531962] usbcore: registered new interface driver xsens_mt [ 4.533068] usbserial: USB Serial support registered for xsens_mt [ 4.534238] usbcore: registered new interface driver adutux [ 4.535383] usbcore: registered new interface driver appledisplay [ 4.536558] usbcore: registered new interface driver cypress_cy7c63 [ 4.537740] usbcore: registered new interface driver emi26 - firmware loader [ 4.539051] usbcore: registered new interface driver emi62 - firmware loader [ 4.540352] usbcore: registered new interface driver idmouse [ 4.541452] usbcore: registered new interface driver isight_firmware [ 4.542674] usbcore: registered new interface driver ldusb [ 4.543759] usbcore: registered new interface driver usbled [ 4.544847] usbcore: registered new interface driver legousbtower [ 4.546012] usbcore: registered new interface driver rio500 [ 4.547096] usbcore: registered new interface driver usbtest [ 4.548196] usbcore: registered new interface driver usb_ehset_test [ 4.549394] usbcore: registered new interface driver trancevibrator [ 4.550592] usbcore: registered new interface driver yurex [ 4.551809] usbcore: registered new interface driver cxacru [ 4.552903] usbcore: registered new interface driver speedtch [ 4.554356] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005 [ 4.555842] dummy_hcd dummy_hcd.0: Dummy host controller [ 4.557031] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1 [ 4.558736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.559974] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.561415] usb usb1: Product: Dummy host controller [ 4.562366] usb usb1: Manufacturer: Linux 3.14.0-rc6-next-20140313-08623-gaf911c6 dummy_hcd [ 4.563970] usb usb1: SerialNumber: dummy_hcd.0 [ 4.565427] hub 1-0:1.0: USB hub found [ 4.566283] hub 1-0:1.0: 1 port detected [ 4.568069] gadgetfs: USB Gadget filesystem, version 24 Aug 2004 [ 4.569306] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 4.571760] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.572893] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.574717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 4.577169] usbcore: registered new interface driver usb_acecad [ 4.578322] usbcore: registered new interface driver aiptek [ 4.579403] usbcore: registered new interface driver hanwang [ 4.580509] usbcore: registered new interface driver kbtab [ 4.581598] usbcore: registered new interface driver wacom [ 4.582634] I2O subsystem v1.325 [ 4.583336] i2o: max drivers = 8 [ 4.584276] I2O Configuration OSM v1.323 [ 4.585222] I2O Bus Adapter OSM v1.317 [ 4.586029] I2O SCSI Peripheral OSM v1.316 [ 4.586889] I2O ProcFS OSM v1.316 [ 4.587649] i2c /dev entries driver [ 4.588938] usbcore: registered new interface driver i2c-diolan-u2c [ 4.590198] usbcore: registered new interface driver i2c-tiny-usb [ 4.591553] isa i2c-pca-isa.0: Please specify I/O base [ 4.594157] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 4.595869] Marvell M88ALP01 'CAFE' Camera Controller version 2 [ 4.597301] vivi-000: V4L2 device registered as video0 [ 4.598294] Video Technology Magazine Virtual Video Capture Board ver 0.8.1 successfully loaded. [ 4.600237] m2m-testdev m2m-testdev.0: Device registered as /dev/video1 [ 4.601592] usbcore: registered new interface driver ttusb-dec [ 4.602740] usbcore: registered new interface driver ttusb [ 4.603820] usbcore: registered new interface driver smsusb [ 4.604913] usbcore: registered new interface driver b2c2_flexcop_usb [ 4.606144] usbcore: registered new interface driver zr364xx [ 4.607248] usbcore: registered new interface driver stkwebcam [ 4.608339] gspca_main: v2.14.0 registered [ 4.609214] usbcore: registered new interface driver conex [ 4.610288] usbcore: registered new interface driver etoms [ 4.611378] usbcore: registered new interface driver jeilinj [ 4.612477] usbcore: registered new interface driver jl2005bcd [ 4.613604] usbcore: registered new interface driver kinect [ 4.614684] usbcore: registered new interface driver konica [ 4.615766] usbcore: registered new interface driver ov519 [ 4.616842] usbcore: registered new interface driver ov534_9 [ 4.617952] usbcore: registered new interface driver pac207 [ 4.619034] usbcore: registered new interface driver pac7311 [ 4.620150] usbcore: registered new interface driver gspca_sn9c20x [ 4.621336] usbcore: registered new interface driver sonixb [ 4.622426] usbcore: registered new interface driver spca500 [ 4.623539] usbcore: registered new interface driver spca501 [ 4.624649] usbcore: registered new interface driver spca508 [ 4.625764] usbcore: registered new interface driver spca561 [ 4.626874] usbcore: registered new interface driver spca1528 [ 4.627980] usbcore: registered new interface driver sq905 [ 4.629054] usbcore: registered new interface driver sq930x [ 4.630148] usbcore: registered new interface driver stk014 [ 4.631244] usbcore: registered new interface driver stv0680 [ 4.632346] usbcore: registered new interface driver vc032x [ 4.633445] usbcore: registered new interface driver vicam [ 4.634533] usbcore: registered new interface driver xirlink-cit [ 4.635689] usbcore: registered new interface driver gspca_zc3xx [ 4.636836] usbcore: registered new interface driver ALi m5602 [ 4.637970] usbcore: registered new interface driver STV06xx [ 4.639070] usbcore: registered new interface driver gspca_gl860 [ 4.640185] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1 [ 4.641379] usbcore: registered new interface driver cpia2 [ 4.642427] au0828 driver loaded [ 4.643171] usbcore: registered new interface driver au0828 [ 4.644264] usbcore: registered new interface driver usbvision [ 4.645350] USBVision USB Video Device Driver for Linux : 0.9.11 [ 4.646488] usbcore: registered new interface driver stk1160 [ 4.647589] usbcore: registered new interface driver em28xx [ 4.648679] usbcore: registered new interface driver usbtv [ 4.649713] smssdio: Siano SMS1xxx SDIO driver [ 4.650593] smssdio: Copyright Pierre Ossman [ 4.651569] usbcore: registered new interface driver dsbr100 [ 4.652678] usbcore: registered new interface driver radio-mr800 [ 4.653828] usbcore: registered new interface driver radio-ma901 [ 4.655245] pps_ldisc: PPS line discipline registered [ 4.656300] Driver for 1-wire Dallas network protocol. [ 4.657428] usbcore: registered new interface driver DS9490R [ 4.658497] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 4.660597] applesmc: supported laptop not found! [ 4.661529] applesmc: driver init failed (ret=-19)! [ 4.664213] pc87360: PC8736x not detected, module not inserted [ 4.665345] sch56xx_common: Unsupported device id: 0xff [ 4.666355] sch56xx_common: Unsupported device id: 0xff [ 4.667807] intel_powerclamp: Intel powerclamp does not run on family 15 model 6 [ 4.669758] mixcomwd: No card detected, or port not available [ 4.671460] usbcore: registered new interface driver pcwd_usb [ 4.672750] acquirewdt: WDT driver for Acquire single board computer initialising [ 4.674401] acquirewdt: I/O address 0x0043 already in use [ 4.675439] acquirewdt: probe of acquirewdt failed with error -5 [ 4.676562] advantechwdt: WDT driver for Advantech single board computer initialising [ 4.678363] advantechwdt: initialized. timeout=60 sec (nowayout=1) [ 4.679533] alim7101_wdt: Steve Hill [ 4.680559] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 4.681734] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 4.683268] wafer5823wdt: I/O address 0x0443 already in use [ 4.684362] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 4.685621] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 4.686817] i6300ESB timer: probe of 0000:00:04.0 failed with error -16 [ 4.688085] sc1200wdt: build 20020303 [ 4.688891] sc1200wdt: io parameter must be specified [ 4.689899] sbc8360: failed to register misc device [ 4.690852] sbc7240_wdt: I/O address 0x0443 already in use [ 4.691879] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 4.694476] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 4.697361] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 4.699041] w83697ug_wdt: No W83697UG/UF could be found [ 4.700040] w83977f_wdt: driver v1.00 [ 4.700813] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 4.702013] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 4.703123] machzwd: no ZF-Logic found [ 4.704039] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 4.705608] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 4.707261] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 4.709465] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 4.711395] device-mapper: multipath: version 1.7.0 loaded [ 4.712478] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.713667] device-mapper: multipath service-time: version 0.2.0 loaded [ 4.714947] device-mapper: cache-policy-mq: version 1.2.0 loaded [ 4.716074] device-mapper: cache cleaner: version 1.0.0 loaded [ 4.717164] Bluetooth: Virtual HCI driver ver 1.4 [ 4.718213] usbcore: registered new interface driver bfusb [ 4.719421] usbcore: registered new interface driver btusb [ 4.720462] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 4.721583] usbcore: registered new interface driver ath3k [ 4.723216] lguest: switcher text too large (4384) [ 4.724365] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 4.725643] usbcore: registered new interface driver vub300 [ 4.726976] usbcore: registered new interface driver ushc [ 4.728652] leds_ss4200: no LED devices found [ 4.729697] ledtrig-cpu: registered to indicate activity on CPUs [ 4.731553] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.734390] usbip_core: usbip_core_init:788: USB/IP Core v1.0.0 [ 4.735561] usbcore: registered new device driver usbip-host [ 4.736633] usbip_host: usbip_host_init:306: USB/IP Host Driver v1.0.0 [ 4.737882] usbcore: registered new interface driver w35und [ 4.738972] usbcore: registered new interface driver r8712u [ 4.740061] usbcore: registered new interface driver r8188eu [ 4.741122] rts5208: Initializing Realtek PCIE storage driver... [ 4.742312] usbcore: registered new interface driver serqt_usb2 [ 4.743448] usbserial: USB Serial support registered for Quatech USB to Serial Driver [ 4.745733] Loading crystalhd 0.9.27 [ 4.746726] input: Speakup as /devices/virtual/input/input3 [ 4.748029] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 4.749302] speakup 3.1.6: initialized [ 4.750107] synth name on entry is: (null) [ 4.751332] ashmem: initialized [ 4.752210] logger: created 256K log 'log_main' [ 4.753269] logger: created 256K log 'log_events' [ 4.754345] logger: created 256K log 'log_radio' [ 4.755414] logger: created 256K log 'log_system' [ 4.756571] dgnc: dgnc-1.3-16, Digi International Part Number 40002369_F [ 4.757891] dgnc: For the tools package or updated drivers please visit http://www.digi.com [ 4.759850] dgap-1.3-16, Digi International Part Number 40002347_C [ 4.761016] For the tools package please visit http://www.digi.com [ 4.762391] FPGA DOWNLOAD ---> [ 4.763070] built at Sat Mar 15 00:24:25 2014 UTC [ 4.764002] FPGA image file name: xlinx_fpga_firmware.bit [ 4.765173] GPIO INIT FAIL!! [ 4.767498] fake-fmc-carrier: mezzanine 0 [ 4.768362] Manufacturer: fake-vendor [ 4.769240] Product name: fake-design-for-testing [ 4.770334] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 4.771624] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 4.773565] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 4.774962] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 4.776849] intel_rapl: driver does not support CPU family 15 model 6 [ 4.778437] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 4.779963] aedsp16: I/O, IRQ and DMA are mandatory [ 4.780922] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 4.782064] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 4.783587] ad1848: No ISAPnP cards found, trying standard ones... [ 4.784746] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996 [ 4.786229] I/O, IRQ, DMA and type are mandatory [ 4.787160] sb: Init: Starting Probe... [ 4.787989] sb: Init: Done [ 4.788648] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc [ 4.790173] uart6850: irq and io must be set. [ 4.791042] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 4.792711] NET: Registered protocol family 26 [ 4.793688] NET: Registered protocol family 17 [ 4.794613] NET: Registered protocol family 15 [ 4.795591] Ebtables v2.0 registered [ 4.796583] NET: Registered protocol family 4 [ 4.797534] NET: Registered protocol family 9 [ 4.798430] X25: Linux Version 0.2 [ 4.800350] NET: Registered protocol family 6 [ 4.801319] NET: Registered protocol family 3 [ 4.802238] can: controller area network core (rev 20120528 abi 9) [ 4.803449] NET: Registered protocol family 29 [ 4.804353] can: raw protocol (rev 20120528) [ 4.805247] can: netlink gateway (rev 20130117) max_hops=1 [ 4.806846] NET: Registered protocol family 35 [ 4.807801] lib80211: common routines for IEEE802.11 drivers [ 4.808902] lib80211_crypt: registered algorithm 'NULL' [ 4.809914] lib80211_crypt: registered algorithm 'WEP' [ 4.810918] lib80211_crypt: registered algorithm 'CCMP' [ 4.811928] lib80211_crypt: registered algorithm 'TKIP' [ 4.813045] 9pnet: Installing 9P2000 support [ 4.814031] NET: Registered protocol family 37 [ 4.814971] Key type dns_resolver registered [ 4.815847] openvswitch: Open vSwitch switching datapath [ 4.817136] NET: Registered protocol family 40 [ 4.818025] mpls_gso: MPLS GSO support [ 4.820317] [ 4.820317] printing PIC contents [ 4.821423] ... PIC IMR: ffff [ 4.822108] ... PIC IRR: 1013 [ 4.822807] ... PIC ISR: 0000 [ 4.823509] ... PIC ELCR: 0c00 [ 4.824203] printing local APIC contents on CPU#0/0: [ 4.825171] ... APIC ID: 00000000 (0) [ 4.825191] ... APIC VERSION: 00050014 [ 4.825191] ... APIC TASKPRI: 00000000 (00) [ 4.825191] ... APIC PROCPRI: 00000000 [ 4.825191] ... APIC LDR: 01000000 [ 4.825191] ... APIC DFR: ffffffff [ 4.825191] ... APIC SPIV: 000001ff [ 4.825191] ... APIC ISR field: [ 4.825191] 0000000000000000000000000000000000000000000000000000000000000000 [ 4.825191] ... APIC TMR field: [ 4.825191] 0000000002000000000000000000000000000000000000000000000000000000 [ 4.825191] ... APIC IRR field: [ 4.825191] 0000000000000000000000000000000000000000000000000000000000008000 [ 4.825191] ... APIC ESR: 00000000 [ 4.825191] ... APIC ICR: 000408f6 [ 4.825191] ... APIC ICR2: 01000000 [ 4.825191] ... APIC LVTT: 000200ef [ 4.825191] ... APIC LVTPC: 00010000 [ 4.825191] ... APIC LVT0: 00010700 [ 4.825191] ... APIC LVT1: 00000400 [ 4.825191] ... APIC LVTERR: 000000fe [ 4.825191] ... APIC TMICT: 0000f423 [ 4.825191] ... APIC TMCCT: 00000c8a [ 4.825191] ... APIC TDCR: 00000003 [ 4.825191] [ 4.846969] number of MP IRQ sources: 15. [ 4.847800] number of IO-APIC #0 registers: 24. [ 4.848707] testing the IO APIC....................... [ 4.849718] IO APIC #0...... [ 4.850382] .... register #00: 00000000 [ 4.851190] ....... : physical APIC id: 00 [ 4.852063] ....... : Delivery Type: 0 [ 4.852889] ....... : LTS : 0 [ 4.853726] .... register #01: 00170011 [ 4.854534] ....... : max redirection entries: 17 [ 4.855518] ....... : PRQ implemented: 0 [ 4.856380] ....... : IO APIC version: 11 [ 4.857261] .... register #02: 00000000 [ 4.858047] ....... : arbitration: 00 [ 4.858865] .... IRQ redirection table: [ 4.859682] 1 0 0 0 0 0 0 00 [ 4.860601] 0 0 0 0 0 1 1 31 [ 4.861512] 0 0 0 0 0 1 1 30 [ 4.862424] 0 0 0 0 0 1 1 33 [ 4.863347] 1 0 0 0 0 1 1 34 [ 4.864265] 1 1 0 0 0 1 1 35 [ 4.865181] 0 0 0 0 0 1 1 36 [ 4.866080] 0 0 0 0 0 1 1 37 [ 4.867006] 0 0 0 0 0 1 1 38 [ 4.867928] 0 1 0 0 0 1 1 39 [ 4.868843] 1 1 0 0 0 1 1 3A [ 4.869810] 1 1 0 0 0 1 1 3B [ 4.871116] 0 0 0 0 0 1 1 3C [ 4.872216] 0 0 0 0 0 1 1 3D [ 4.873139] 0 0 0 0 0 1 1 3E [ 4.874045] 0 0 0 0 0 1 1 3F [ 4.874955] 1 0 0 0 0 0 0 00 [ 4.875875] 1 0 0 0 0 0 0 00 [ 4.876791] 1 0 0 0 0 0 0 00 [ 4.879454] 1 0 0 0 0 0 0 00 [ 4.880373] 1 0 0 0 0 0 0 00 [ 4.881288] 1 0 0 0 0 0 0 00 [ 4.882204] 1 0 0 0 0 0 0 00 [ 4.883115] 1 0 0 0 0 0 0 00 [ 4.884009] IRQ to pin mappings: [ 4.884715] IRQ0 -> 0:2 [ 4.885461] IRQ1 -> 0:1 [ 4.886205] IRQ3 -> 0:3 [ 4.886938] IRQ4 -> 0:4 [ 4.887689] IRQ5 -> 0:5 [ 4.888426] IRQ6 -> 0:6 [ 4.889172] IRQ7 -> 0:7 [ 4.889906] IRQ8 -> 0:8 [ 4.890651] IRQ9 -> 0:9 [ 4.891395] IRQ10 -> 0:10 [ 4.892166] IRQ11 -> 0:11 [ 4.892926] IRQ12 -> 0:12 [ 4.893699] IRQ13 -> 0:13 [ 4.894468] IRQ14 -> 0:14 [ 4.895237] IRQ15 -> 0:15 [ 4.895996] .................................... done. [ 4.896984] Using IPI Shortcut mode [ 4.898037] Loading compiled-in X.509 certificates [ 4.899790] Btrfs loaded, debug=on, integrity-checker=on [ 4.901294] Key type trusted registered [ 4.902781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.903954] EDD information not available. [ 4.906444] Freeing unused kernel memory: 1244K (d2892000 - d29c9000) [ 5.631187] LogFS: Start mount 0 [ 5.642106] LogFS: Start unmounting [ 5.651816] INFO: trying to register non-static key. [ 5.652023] the code is fine but needs lockdep annotation. [ 5.652023] turning off the locking correctness validator. [ 5.652023] CPU: 0 PID: 381 Comm: mount Not tainted 3.14.0-rc6-next-20140313-08623-gaf911c6 #2 [ 5.652023] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.652023] cd538c44 ccda7d7c d176dee0 ccda7dc0 cf4e458c d2070e6c d179ae00 ccda7e34 [ 5.652023] cf61e805 00000002 0000407c d2b5a830 cce93000 c0027e40 00000000 cd538c44 [ 5.652023] ccd54390 ccd54390 cd538c44 00000000 ccda7dec cf4e5ccc 00000000 00000000 [ 5.652023] Call Trace: [ 5.652023] [] dump_stack+0x40/0x5e [ 5.652023] [] __lock_acquire.isra.21+0x3ac/0x1a40 [ 5.652023] [] ? wait_for_completion+0x20/0x40 [ 5.652023] [] ? writeback_inodes_sb_nr+0x105/0x140 [ 5.652023] [] lock_acquire+0xac/0x100 [ 5.652023] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.652023] [] mutex_lock_nested+0xaf/0x6c0 [ 5.652023] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.652023] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.652023] [] logfs_get_wblocks+0x12d/0x160 [ 5.652023] [] logfs_sync_fs+0x23/0x80 [ 5.652023] [] __sync_filesystem+0x7c/0xc0 [ 5.652023] [] sync_filesystem+0x72/0xc0 [ 5.652023] [] logfs_kill_sb+0x3d/0x220 [ 5.652023] [] deactivate_locked_super+0x8e/0x100 [ 5.652023] [] logfs_mount+0xc0f/0xce0 [ 5.652023] [] mount_fs+0xd3/0x2e0 [ 5.652023] [] ? kstrdup+0x5b/0xa0 [ 5.652023] [] vfs_kern_mount+0x91/0x200 [ 5.652023] [] ? _raw_read_unlock+0x6d/0xc0 [ 5.652023] [] do_mount+0x1383/0x1700 [ 5.652023] [] ? strndup_user+0x5a/0xa0 [ 5.652023] [] SyS_mount+0x105/0x1a0 [ 5.652023] [] syscall_call+0x7/0xb [ 5.688034] BUG: unable to handle kernel NULL pointer dereference at (null) [ 5.689025] IP: [] mutex_lock_nested+0x2ca/0x6c0 [ 5.689025] *pdpt = 000000000ce7f001 *pde = 0000000000000000 [ 5.689025] Oops: 0002 [#1] PREEMPT [ 5.689025] CPU: 0 PID: 381 Comm: mount Not tainted 3.14.0-rc6-next-20140313-08623-gaf911c6 #2 [ 5.689025] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.689025] task: ccd54390 ti: ccda6000 task.ti: ccda6000 [ 5.689025] EIP: 0060:[] EFLAGS: 00010046 CPU: 0 [ 5.689025] EIP is at mutex_lock_nested+0x2ca/0x6c0 [ 5.689025] EAX: 00000000 EBX: cd538c04 ECX: cd538c30 EDX: ccda7e10 [ 5.689025] ESI: 00000246 EDI: ccd54390 EBP: ccda7e2c ESP: ccda7df4 [ 5.689025] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 5.689025] CR0: 8005003b CR2: 00000000 CR3: 0cea5000 CR4: 000006f0 [ 5.689025] Stack: [ 5.689025] 00000000 00000001 00000000 cf77be6d cd538c30 cd538c44 cf77be6d cd538c30 [ 5.689025] 00000000 11111111 ccda7e10 cce93000 00000000 ffffffea ccda7e3c cf77be6d [ 5.689025] cce93000 00000000 ccda7e48 cf776243 cce93000 ccda7e58 cf62487c cce93000 [ 5.689025] Call Trace: [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] logfs_sync_fs+0x23/0x80 [ 5.689025] [] __sync_filesystem+0x7c/0xc0 [ 5.689025] [] sync_filesystem+0x72/0xc0 [ 5.689025] [] logfs_kill_sb+0x3d/0x220 [ 5.689025] [] deactivate_locked_super+0x8e/0x100 [ 5.689025] [] logfs_mount+0xc0f/0xce0 [ 5.689025] [] mount_fs+0xd3/0x2e0 [ 5.689025] [] ? kstrdup+0x5b/0xa0 [ 5.689025] [] vfs_kern_mount+0x91/0x200 [ 5.689025] [] ? _raw_read_unlock+0x6d/0xc0 [ 5.689025] [] do_mount+0x1383/0x1700 [ 5.689025] [] ? strndup_user+0x5a/0xa0 [ 5.689025] [] SyS_mount+0x105/0x1a0 [ 5.689025] [] syscall_call+0x7/0xb [ 5.689025] Code: e4 e8 fb 43 d4 fd 83 05 e8 f4 a2 d2 01 8d 43 2c 83 15 ec f4 a2 d2 00 8d 55 e4 89 c1 89 45 d8 8b 43 30 89 4d e4 89 53 30 89 45 e8 <89> 10 8b 55 e0 8b 45 dc 89 7d ec e8 e6 72 d4 fd eb 12 8d 74 26 [ 5.689025] EIP: [] mutex_lock_nested+0x2ca/0x6c0 SS:ESP 0068:ccda7df4 [ 5.689025] CR2: 0000000000000000 [ 5.689025] ---[ end trace 29ca2846d34a3d8f ]--- [ 5.689025] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:20 [ 5.689025] in_atomic(): 1, irqs_disabled(): 1, pid: 381, name: mount [ 5.689025] INFO: lockdep is turned off. [ 5.689025] Preemption disabled at:[] logfs_get_wblocks+0x12d/0x160 [ 5.689025] [ 5.689025] CPU: 0 PID: 381 Comm: mount Tainted: G D 3.14.0-rc6-next-20140313-08623-gaf911c6 #2 [ 5.689025] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.689025] 0000017d ccda7be0 d176dee0 ccda7c0c cf4d1c11 d2159e2d cf77be6d cf77be6d [ 5.689025] 0000017d ccd54600 00000000 ccd2e364 ccd2e398 ccd54390 ccda7c2c d179f66f [ 5.689025] 00000000 00000000 d24a08c4 ccd54390 ccd54390 00000009 ccda7c40 cf4a4227 [ 5.689025] Call Trace: [ 5.689025] [] dump_stack+0x40/0x5e [ 5.689025] [] __might_sleep+0x271/0x2a0 [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] down_read+0x2f/0x140 [ 5.689025] [] exit_signals+0x27/0x240 [ 5.689025] [] do_exit+0x1ae/0x1160 [ 5.689025] [] ? kmsg_dump+0x180/0x1e0 [ 5.689025] [] ? kmsg_dump+0x1b5/0x1e0 [ 5.689025] [] ? kmsg_dump+0x46/0x1e0 [ 5.689025] [] oops_end+0x165/0x180 [ 5.689025] [] no_context+0x3ce/0x3e4 [ 5.689025] [] __bad_area_nosemaphore+0x226/0x23c [ 5.689025] [] ? kvm_read_and_reset_pf_reason+0x60/0x60 [ 5.689025] [] bad_area_nosemaphore+0x20/0x30 [ 5.689025] [] __do_page_fault+0x247/0x9e0 [ 5.689025] [] ? update_process_times+0xd1/0x100 [ 5.689025] [] ? tick_handle_periodic+0x34/0x100 [ 5.689025] [] ? tick_handle_periodic+0x34/0x100 [ 5.689025] [] ? irq_exit+0x141/0x160 [ 5.689025] [] ? smp_apic_timer_interrupt+0x6c/0xa0 [ 5.689025] [] ? apic_timer_interrupt+0x2d/0x40 [ 5.689025] [] ? kvm_read_and_reset_pf_reason+0x60/0x60 [ 5.689025] [] do_page_fault+0x36/0x60 [ 5.689025] [] do_async_page_fault+0x4b/0x100 [ 5.689025] [] error_code+0x58/0x60 [ 5.689025] [] ? jffs2_sum_scan_sumnode+0x45b/0x820 [ 5.689025] [] ? kvm_read_and_reset_pf_reason+0x60/0x60 [ 5.689025] [] ? mutex_lock_nested+0x2ca/0x6c0 [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] ? logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] logfs_get_wblocks+0x12d/0x160 [ 5.689025] [] logfs_sync_fs+0x23/0x80 [ 5.689025] [] __sync_filesystem+0x7c/0xc0 [ 5.689025] [] sync_filesystem+0x72/0xc0 [ 5.689025] [] logfs_kill_sb+0x3d/0x220 [ 5.689025] [] deactivate_locked_super+0x8e/0x100 [ 5.689025] [] logfs_mount+0xc0f/0xce0 [ 5.689025] [] mount_fs+0xd3/0x2e0 [ 5.689025] [] ? kstrdup+0x5b/0xa0 [ 5.689025] [] vfs_kern_mount+0x91/0x200 [ 5.689025] [] ? _raw_read_unlock+0x6d/0xc0 [ 5.689025] [] do_mount+0x1383/0x1700 [ 5.689025] [] ? strndup_user+0x5a/0xa0 [ 5.689025] [] SyS_mount+0x105/0x1a0 [ 5.689025] [] syscall_call+0x7/0xb [ 5.689025] note: mount[381] exited with preempt_count 1 [ 5.905516] (stc): gdata/new_proto/recv or reg_complete_cb not ready [ 5.906836] fmdrv: Failed to get ST write func pointer [ 5.908874] (stc): chnl_id 8 not supported [ 5.909594] fmdrv: st_unregister failed -93 [ 5.910722] fmdrv: Unable to prepare FM CORE Elapsed time: 15 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-st0-03150024/af911c69655709defa3daa926d72d5447688754c/vmlinuz-3.14.0-rc6-next-20140313-08623-gaf911c6 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-st0-03150024/next:master/.vmlinuz-af911c69655709defa3daa926d72d5447688754c-20140315004838-4-ivytown2 branch=next/master BOOT_IMAGE=/kernel/i386-randconfig-st0-03150024/af911c69655709defa3daa926d72d5447688754c/vmlinuz-3.14.0-rc6-next-20140313-08623-gaf911c6' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::21259-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-ivytown2-22 -serial file:/dev/shm/kboot/serial-yocto-ivytown2-22 -daemonize -display none -monitor null