Date:	Mon, 17 Mar 2014 10:53:44 +0530
From:	Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@...inx.com>
To:	<dougthompson@...ssion.com>, <linux-edac@...r.kernel.org>,
	<michal.simek@...inx.com>, <robh+dt@...nel.org>,
	<pawel.moll@....com>, <mark.rutland@....com>,
	<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
	<rob@...dley.net>, <sorenb@...inx.com>
CC:	<devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <kpc528@...il.com>,
	<kalluripunnaiahchoudary@...il.com>, <punnaia@...inx.com>
Subject: [RFC PATCH v2] edac: synopsys: Added EDAC support for zynq ddr ecc controller

Added EDAC support for reporting the ecc errors of synopsys ddr controller.
The ddr ecc controller corrects single bit errors and detects double bit
errors

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
---
Changes for v2:
- Updated the commit header and message
- Renamed the filenames to synopsys_edac
- Corrected the compatilble string, commnets
- Renamed the macros,fucntions and data structures
---
 .../devicetree/bindings/edac/synopsys_edac.txt     |   18 +
 drivers/edac/Kconfig                               |    7 +
 drivers/edac/Makefile                              |    1 +
 drivers/edac/synopsys_edac.c                       |  614 ++++++++++++++++++++
 4 files changed, 640 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/edac/synopsys_edac.txt
 create mode 100644 drivers/edac/synopsys_edac.c

diff --git a/Documentation/devicetree/bindings/edac/synopsys_edac.txt b/Documentation/devicetree/bindings/edac/synopsys_edac.txt
new file mode 100644
index 0000000..c4a559b
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/synopsys_edac.txt
@@ -0,0 +1,18 @@
+Synopsys EDAC driver, it does reports the DDR ECC single bit errors that are
+corrected and double bit ecc errors that are detected by the DDR ECC controller.
+ECC support for DDR is available in half-bus width(16 bit) configuration only.
+
+Required properties:
+- compatible: Should be "xlnx,zynq-ddrc-1.04"
+- reg: Should contain DDR controller registers location and length.
+
+Example:
+++++++++
+
+ddrc0: ddrc@...06000 {
+	compatible = "xlnx,zynq-ddrc-1.04";
+	reg = <0xf8006000 0x1000>;
+};
+
+Synopsys EDAC driver detects the DDR ECC enable state by reading the appropriate
+control register.
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 878f090..58b69b1 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -368,4 +368,11 @@ config EDAC_OCTEON_PCI
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
+config EDAC_SYNOPSYS
+	tristate "Synopsys DDR Memory Controller"
+	depends on EDAC_MM_EDAC && ARCH_ZYNQ
+	help
+	  This enables support for EDAC on the ECC memory used
+	  with the Synopsys DDR memory controller.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 4154ed6..5628a6f 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -64,3 +64,4 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
 obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
 obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
 obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
+obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
new file mode 100644
index 0000000..7cec331
--- /dev/null
+++ b/drivers/edac/synopsys_edac.c
@@ -0,0 +1,614 @@
+/*
+ * Synopsys DDR ECC Driver
+ * This driver is based on ppc4xx_edac.c drivers
+ *
+ * Copyright (C) 2012 - 2014 Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "edac_core.h"
+
+/* Number of cs_rows needed per memory controller */
+#define SYNOPSYS_EDAC_NR_CSROWS	1
+
+/* Number of channels per memory controller */
+#define SYNOPSYS_EDAC_NR_CHANS	1
+
+/* Granularity of reported error in bytes */
+#define SYNOPSYS_EDAC_ERROR_GRAIN	1
+
+#define SYNOPSYS_EDAC_MESSAGE_SIZE	256
+
+/* Synopsys DDR memory controller registers that are relevant to ECC */
+#define SYNOPSYS_DDRC_CONTROL_REG_OFFSET	0x0 /* Control regsieter */
+#define SYNOPSYS_DDRC_T_ZQ_REG_OFFSET	0xA4 /* ZQ register */
+
+/* ECC control register */
+#define SYNOPSYS_DDRC_ECC_CONTROL_REG_OFFSET	0xC4
+/* ECC log register */
+#define SYNOPSYS_DDRC_ECC_CE_LOG_REG_OFFSET		0xC8
+/* ECC address register */
+#define SYNOPSYS_DDRC_ECC_CE_ADDR_REG_OFFSET	0xCC
+/* ECC data[31:0] register */
+#define SYNOPSYS_DDRC_ECC_CE_DATA_31_0_REG_OFFSET	0xD0
+
+/* Uncorrectable error info regsisters */
+#define SYNOPSYS_DDRC_ECC_UE_LOG_REG_OFFSET	0xDC /* ECC log register */
+#define SYNOPSYS_DDRC_ECC_UE_ADDR_REG_OFFSET	0xE0 /* ECC address register */
+#define SYNOPSYS_DDRC_ECC_UE_DATA_31_0_REG_OFFSET	0xE4 /* ECC data reg */
+
+#define SYNOPSYS_DDRC_ECC_STAT_REG_OFFSET	0xF0 /* ECC stats register */
+#define SYNOPSYS_DDRC_ECC_SCRUB_REG_OFFSET	0xF4 /* ECC scrub register */
+
+/* Control regsiter bitfield definitions */
+#define SYNOPSYS_DDRC_CTRLREG_BUSWIDTH_MASK	0xC
+#define SYNOPSYS_DDRC_CTRLREG_BUSWIDTH_SHIFT	2
+
+#define SYNOPSYS_DDRCTL_WDTH_16	1
+#define SYNOPSYS_DDRCTL_WDTH_32	0
+
+/* ZQ register bitfield definitions */
+#define SYNOPSYS_DDRC_T_ZQ_REG_DDRMODE_MASK	0x2
+
+/* ECC control register bitfield definitions */
+#define SYNOPSYS_DDRC_ECCCTRL_CLR_CE_ERR	0x2
+#define SYNOPSYS_DDRC_ECCCTRL_CLR_UE_ERR	0x1
+
+/* ECC correctable/uncorrectable error log register definitions */
+#define SYNOPSYS_DDRC_ECC_CE_LOGREG_VALID		0x1
+#define SYNOPSYS_DDRC_ECC_CE_LOGREG_BITPOS_MASK		0xFE
+#define SYNOPSYS_DDRC_ECC_CE_LOGREG_BITPOS_SHIFT	1
+
+/* ECC correctable/uncorrectable error address register definitions */
+#define SYNOPSYS_DDRC_ECC_ADDRREG_COL_MASK		0xFFF
+#define SYNOPSYS_DDRC_ECC_ADDRREG_ROW_MASK		0xFFFF000
+#define SYNOPSYS_DDRC_ECC_ADDRREG_ROW_SHIFT		12
+#define SYNOPSYS_DDRC_ECC_ADDRREG_BANK_MASK		0x70000000
+#define SYNOPSYS_DDRC_ECC_ADDRREG_BANK_SHIFT	28
+
+/* ECC statistic regsiter definitions */
+#define SYNOPSYS_DDRC_ECC_STATREG_UECOUNT_MASK	0xFF
+#define SYNOPSYS_DDRC_ECC_STATREG_CECOUNT_MASK	0xFF00
+#define SYNOPSYS_DDRC_ECC_STATREG_CECOUNT_SHIFT	8
+
+/* ECC scrub regsiter definitions */
+#define SYNOPSYS_DDRC_ECC_SCRUBREG_ECC_MODE_MASK	0x7
+#define SYNOPSYS_DDRC_ECC_SCRUBREG_ECCMODE_SECDED	0x4
+
+/**
+ * struct ecc_error_info - ECC error log information
+ * @row:	Row number
+ * @col:	Column number
+ * @bank:	Bank number
+ * @bitpos:	Bit position
+ * @data:	Data causing the error
+ */
+struct ecc_error_info {
+	u32 row;
+	u32 col;
+	u32 bank;
+	u32 bitpos;
+	u32 data;
+};
+
+/**
+ * struct synopsys_ecc_status - ECC status information to report
+ * @ce_count:	Correctable error count
+ * @ue_count:	Uncorrectable error count
+ * @ceinfo:	Correctable error log information
+ * @ueinfo:	Uncorrectable error log information
+ */
+struct synopsys_ecc_status {
+	u32 ce_count;
+	u32 ue_count;
+	struct ecc_error_info ceinfo;
+	struct ecc_error_info ueinfo;
+};
+
+/**
+ * struct synopsys_edac_priv - DDR memory controller private instance data
+ * @baseaddr:		Base address of the DDR controller
+ * @ce_count:		Correctable Error count
+ * @ue_count:		Uncorrectable Error count
+ */
+struct synopsys_edac_priv {
+	void __iomem *baseaddr;
+	u32 ce_count;
+	u32 ue_count;
+};
+
+/**
+ * synopsys_edac_geterror_info - Get the current ecc error info
+ * @base:	Pointer to the base address of the ddr memory controller
+ * @perrstatus:	Pointer to the synopsys ecc status structure
+ *
+ * This routine determines there is any ecc error or not
+ *
+ * Return: zero if there is no error otherwise returns 1
+ */
+static int synopsys_edac_geterror_info(void __iomem *base,
+		struct synopsys_ecc_status *perrstatus)
+{
+	u32 regval;
+	u32 clearval = 0;
+
+	regval = readl(base + SYNOPSYS_DDRC_ECC_STAT_REG_OFFSET) &
+			(SYNOPSYS_DDRC_ECC_STATREG_UECOUNT_MASK |
+			SYNOPSYS_DDRC_ECC_STATREG_CECOUNT_MASK);
+
+	if (regval == 0)
+		return 0;
+
+	memset(perrstatus, 0, sizeof(struct synopsys_ecc_status));
+
+	perrstatus->ce_count =
+			   (regval & SYNOPSYS_DDRC_ECC_STATREG_CECOUNT_MASK) >>
+			    SYNOPSYS_DDRC_ECC_STATREG_CECOUNT_SHIFT;
+	perrstatus->ue_count =
+			   (regval & SYNOPSYS_DDRC_ECC_STATREG_UECOUNT_MASK);
+
+	if (perrstatus->ce_count) {
+		regval = readl(base + SYNOPSYS_DDRC_ECC_CE_LOG_REG_OFFSET);
+		if (regval & SYNOPSYS_DDRC_ECC_CE_LOGREG_VALID) {
+			perrstatus->ceinfo.bitpos = (regval &
+				SYNOPSYS_DDRC_ECC_CE_LOGREG_BITPOS_MASK) >>
+				SYNOPSYS_DDRC_ECC_CE_LOGREG_BITPOS_SHIFT;
+			regval = readl(base +
+					SYNOPSYS_DDRC_ECC_CE_ADDR_REG_OFFSET);
+			perrstatus->ceinfo.row = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_ROW_MASK) >>
+					SYNOPSYS_DDRC_ECC_ADDRREG_ROW_SHIFT;
+			perrstatus->ceinfo.col = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_COL_MASK);
+			perrstatus->ceinfo.bank = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_BANK_MASK) >>
+					SYNOPSYS_DDRC_ECC_ADDRREG_BANK_SHIFT;
+			perrstatus->ceinfo.data = readl(base +
+				SYNOPSYS_DDRC_ECC_CE_DATA_31_0_REG_OFFSET);
+			edac_dbg(3, "ce bitposition: %d data: %d\n",
+					perrstatus->ceinfo.bitpos,
+					perrstatus->ceinfo.data);
+		}
+		clearval = SYNOPSYS_DDRC_ECCCTRL_CLR_CE_ERR;
+	}
+
+	if (perrstatus->ue_count) {
+		regval = readl(base + SYNOPSYS_DDRC_ECC_UE_LOG_REG_OFFSET);
+		if (regval & SYNOPSYS_DDRC_ECC_CE_LOGREG_VALID) {
+			regval = readl(base +
+					SYNOPSYS_DDRC_ECC_UE_ADDR_REG_OFFSET);
+			perrstatus->ueinfo.row = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_ROW_MASK) >>
+					SYNOPSYS_DDRC_ECC_ADDRREG_ROW_SHIFT;
+			perrstatus->ueinfo.col = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_COL_MASK);
+			perrstatus->ueinfo.bank = (regval &
+					SYNOPSYS_DDRC_ECC_ADDRREG_BANK_MASK) >>
+					SYNOPSYS_DDRC_ECC_ADDRREG_BANK_SHIFT;
+			perrstatus->ueinfo.data = readl(base +
+				    SYNOPSYS_DDRC_ECC_UE_DATA_31_0_REG_OFFSET);
+		}
+		clearval |= SYNOPSYS_DDRC_ECCCTRL_CLR_UE_ERR;
+	}
+
+	writel(clearval, base + SYNOPSYS_DDRC_ECC_CONTROL_REG_OFFSET);
+	writel(0x0, base + SYNOPSYS_DDRC_ECC_CONTROL_REG_OFFSET);
+
+	return 1;
+}
+
+/**
+ * synopsys_edac_generate_message - Generate interpreted ECC status message
+ * @mci:	Pointer to the edac memory controller instance
+ * @perrstatus:	Pointer to the synopsys ecc status structure
+ * @buffer:	Pointer to the buffer in which to generate the
+ *		message
+ * @size:	The size, in bytes, of space available in buffer
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECC register of
+ * the specified ECC status.
+ */
+static void synopsys_edac_generate_message(const struct mem_ctl_info *mci,
+			struct synopsys_ecc_status *perrstatus, char *buffer,
+			size_t size)
+{
+	struct ecc_error_info *pinfo = NULL;
+
+	if (perrstatus->ce_count > 0)
+		pinfo = &perrstatus->ceinfo;
+	else
+		pinfo = &perrstatus->ueinfo;
+
+	snprintf(buffer, SYNOPSYS_EDAC_MESSAGE_SIZE,
+		 "DDR ECC error type :%s Row %d Bank %d Col %d ",
+		 (perrstatus->ce_count > 0) ? "CE" : "UE", pinfo->row,
+		 pinfo->bank, pinfo->col);
+}
+
+/**
+ * synopsys_edac_handle_error - Handle controller error types CE and UE
+ * @mci:	Pointer to the edac memory controller instance
+ * @perrstatus:	Pointer to the synopsys ecc status structure
+ *
+ * This routine handles the controller ECC correctable error.
+ */
+static void synopsys_edac_handle_error(struct mem_ctl_info *mci,
+			struct synopsys_ecc_status *perrstatus)
+{
+	char message[SYNOPSYS_EDAC_MESSAGE_SIZE];
+
+	synopsys_edac_generate_message(mci, perrstatus, &message[0],
+				   SYNOPSYS_EDAC_MESSAGE_SIZE);
+
+	if (perrstatus->ce_count)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+				     perrstatus->ce_count, 0, 0, 0, 0, 0, -1,
+				     &message[0], "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+				     perrstatus->ue_count, 0, 0, 0, 0, 0, -1,
+				     &message[0], "");
+}
+
+/**
+ * synopsys_edac_check - Check controller for ECC errors
+ * @mci:	Pointer to the edac memory controller instance
+ *
+ * This routine is used to check and post ECC errors and is called by
+ * the EDAC polling thread
+ */
+static void synopsys_edac_check(struct mem_ctl_info *mci)
+{
+	struct synopsys_edac_priv *priv = mci->pvt_info;
+	struct synopsys_ecc_status errstatus;
+	int status;
+
+	status = synopsys_edac_geterror_info(priv->baseaddr, &errstatus);
+	if (status) {
+		priv->ce_count += errstatus.ce_count;
+		priv->ue_count += errstatus.ue_count;
+
+		if (errstatus.ce_count) {
+			synopsys_edac_handle_error(mci, &errstatus);
+			errstatus.ce_count = 0;
+		}
+		if (errstatus.ue_count) {
+			synopsys_edac_handle_error(mci, &errstatus);
+			errstatus.ue_count = 0;
+		}
+		edac_dbg(3, "total error count ce %d ue %d\n",
+			 priv->ce_count, priv->ue_count);
+	}
+}
+
+/**
+ * synopsys_edac_get_dtype - Return the controller memory width
+ * @base:	Pointer to the ddr memory contoller base address
+ *
+ * This routine returns the EDAC device type width appropriate for the
+ * current controller configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type synopsys_edac_get_dtype(void __iomem *base)
+{
+	enum dev_type dt;
+	u32 width;
+
+	width = readl(base + SYNOPSYS_DDRC_CONTROL_REG_OFFSET);
+	width = (width & SYNOPSYS_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+			SYNOPSYS_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+
+	switch (width) {
+	case SYNOPSYS_DDRCTL_WDTH_16:
+		dt = DEV_X2;
+		break;
+	case SYNOPSYS_DDRCTL_WDTH_32:
+		dt = DEV_X4;
+		break;
+	default:
+		dt = DEV_UNKNOWN;
+	}
+
+	return dt;
+}
+
+/**
+ * synopsys_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base:	Pointer to the ddr memory contoller base address
+ *
+ * This routine returns the ECC enable/diable status for the controller
+ *
+ * Return: a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool synopsys_edac_get_eccstate(void __iomem *base)
+{
+	enum dev_type dt;
+	u32 ecctype;
+	bool state = false;
+
+	dt = synopsys_edac_get_dtype(base);
+
+	ecctype = (readl(base + SYNOPSYS_DDRC_ECC_SCRUB_REG_OFFSET) &
+			SYNOPSYS_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+	if ((ecctype == SYNOPSYS_DDRC_ECC_SCRUBREG_ECCMODE_SECDED)
+			&& (dt == DEV_X2)) {
+		state = true;
+		writel(0x0, base + SYNOPSYS_DDRC_ECC_CONTROL_REG_OFFSET);
+	} else {
+		state = false;
+	}
+
+	return state;
+}
+
+/**
+ * synopsys_edac_get_memsize - reads the size of the attached memory device
+ *
+ * Return: the memory size in bytes
+ *
+ * This routine returns the size of the system memory by reading the sysinfo
+ * information
+ */
+static u32 synopsys_edac_get_memsize(void)
+{
+	struct sysinfo inf;
+
+	/* Reading the system memory size from the global meminfo structure */
+	si_meminfo(&inf);
+
+	return inf.totalram * inf.mem_unit;
+}
+
+/**
+ * synopsys_edac_get_mtype - Returns controller memory type
+ * @base:	pointer to the synopsys ecc status structure
+ *
+ * This routine returns the EDAC memory type appropriate for the
+ * current controller configuration.
+ *
+ * Return: a memory type enumeration.
+ */
+static enum mem_type synopsys_edac_get_mtype(void __iomem *base)
+{
+	enum mem_type mt;
+	u32 memtype;
+
+	memtype = readl(base + SYNOPSYS_DDRC_T_ZQ_REG_OFFSET);
+
+	if (memtype & SYNOPSYS_DDRC_T_ZQ_REG_DDRMODE_MASK)
+		mt = MEM_DDR3;
+	else
+		mt = MEM_DDR2;
+
+	return mt;
+}
+
+/**
+ * synopsys_edac_init_csrows - Initialize the cs row data
+ * @mci:	Pointer to the edac memory controller instance
+ *
+ * This routine initializes the chip select rows associated
+ * with the EDAC memory controller instance
+ *
+ * Return: 0 if OK; otherwise, -EINVAL if the memory bank size
+ * configuration cannot be determined.
+ */
+static int synopsys_edac_init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info *csi;
+	struct dimm_info *dimm;
+	struct synopsys_edac_priv *priv = mci->pvt_info;
+	u32 size;
+	int row, j;
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		csi = mci->csrows[row];
+		size = synopsys_edac_get_memsize();
+
+		for (j = 0; j < csi->nr_channels; j++) {
+			dimm = csi->channels[j]->dimm;
+			dimm->edac_mode = EDAC_FLAG_SECDED;
+			dimm->mtype = synopsys_edac_get_mtype(priv->baseaddr);
+			dimm->nr_pages =
+			    (size >> PAGE_SHIFT) / csi->nr_channels;
+			dimm->grain = SYNOPSYS_EDAC_ERROR_GRAIN;
+			dimm->dtype = synopsys_edac_get_dtype(priv->baseaddr);
+		}
+
+	}
+
+	return 0;
+}
+
+/**
+ * synopsys_edac_mc_init - Initialize driver instance
+ * @mci:	Pointer to the edac memory controller instance
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * This routine performs initialization of the EDAC memory controller
+ * instance and related driver-private data associated with the
+ * memory controller the instance is bound to.
+ *
+ * Return: 0 if OK; otherwise, < 0 on error.
+ */
+static int synopsys_edac_mc_init(struct mem_ctl_info *mci,
+			struct platform_device *pdev)
+{
+	int status;
+	struct synopsys_edac_priv *priv;
+
+	/* Initial driver pointers and private data */
+	mci->pdev = &pdev->dev;
+	priv = mci->pvt_info;
+	platform_set_drvdata(pdev, mci);
+
+	/* Initialize controller capabilities and configuration */
+	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->scrub_cap = SCRUB_HW_SRC;
+	/* Check the scrub setting from the controller */
+	mci->scrub_mode = SCRUB_NONE;
+
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	/* Initialize strings */
+	mci->ctl_name = "synopsys_ddr_controller";
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->mod_name = "synopsys_edac";
+	mci->mod_ver = "1";
+
+	/* Initialize callbacks */
+	edac_op_state = EDAC_OPSTATE_POLL;
+	mci->edac_check = synopsys_edac_check;
+	mci->ctl_page_to_phys = NULL;
+
+	/*
+	 * Initialize the MC control structure 'csrows' table
+	 * with the mapping and control information.
+	 */
+	status = synopsys_edac_init_csrows(mci);
+	if (status)
+		pr_err("Failed to initialize rows!\n");
+
+	return status;
+}
+
+/**
+ * synopsys_edac_mc_probe - Check controller and bind driver
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * This routine probes a specific controller
+ * instance for binding with the driver.
+ *
+ * Return: 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int synopsys_edac_mc_probe(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct synopsys_edac_priv *priv;
+	int rc;
+	struct resource *res;
+	void __iomem *baseaddr;
+
+	/* Get the data from the platform device */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	baseaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(baseaddr))
+		return PTR_ERR(baseaddr);
+
+	/* Check for the ecc enable status */
+	if (synopsys_edac_get_eccstate(baseaddr) == false) {
+		dev_err(&pdev->dev, "ecc not enabled\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * At this point, we know ECC is enabled, allocate an EDAC
+	 * controller instance and perform the appropriate
+	 * initialization.
+	 */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = SYNOPSYS_EDAC_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = SYNOPSYS_EDAC_NR_CHANS;
+	layers[1].is_virt_csrow = false;
+
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct synopsys_edac_priv));
+	if (mci == NULL) {
+		pr_err("Failed memory allocation for mci instance!\n");
+		return -ENOMEM;
+	}
+
+	priv = mci->pvt_info;
+	priv->baseaddr = baseaddr;
+	rc = synopsys_edac_mc_init(mci, pdev);
+	if (rc) {
+		pr_err("Failed to initialize instance!\n");
+		goto free_edac_mc;
+	}
+
+	/*
+	 * We have a valid, initialized EDAC instance bound to the
+	 * controller. Attempt to register it with the EDAC subsystem
+	 */
+	rc = edac_mc_add_mc(mci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to register with EDAC core\n");
+		goto del_edac_mc;
+	}
+
+	return rc;
+
+del_edac_mc:
+	edac_mc_del_mc(&pdev->dev);
+free_edac_mc:
+	edac_mc_free(mci);
+
+	return rc;
+}
+
+/**
+ * synopsys_edac_mc_remove - Unbind driver from controller
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * This routine unbinds the EDAC memory controller instance associated
+ * with the specified controller described by the
+ * OpenFirmware device tree node passed as a parameter.
+ *
+ * Return: Unconditionally 0
+ */
+static int synopsys_edac_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+/* Device tree node type and compatible tuples this driver can match on */
+static struct of_device_id synopsys_edac_match[] = {
+	{ .compatible = "xlnx,zynq-ddrc-1.04", },
+	{ /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, synopsys_edac_match);
+
+static struct platform_driver synopsys_edac_mc_driver = {
+	.driver = {
+		   .name = "synopsys-edac",
+		   .owner = THIS_MODULE,
+		   .of_match_table = synopsys_edac_match,
+		   },
+	.probe = synopsys_edac_mc_probe,
+	.remove = synopsys_edac_mc_remove,
+};
+
+module_platform_driver(synopsys_edac_mc_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Synopsys DDR ECC driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists