According to the documentation the CPU must wait for CONTROL_INIT to be cleared before writing to the baudrate registers. Signed-off-by: Benedikt Spranger Signed-off-by: Thomas Gleixner --- drivers/net/can/c_can/c_can.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) Index: linux/drivers/net/can/c_can/c_can.c =================================================================== --- linux.orig/drivers/net/can/c_can/c_can.c +++ linux/drivers/net/can/c_can/c_can.c @@ -566,6 +566,21 @@ static netdev_tx_t c_can_start_xmit(stru return NETDEV_TX_OK; } +static int c_can_wait_for_ctrl_init(struct net_device *dev, + struct c_can_priv *priv, u32 init) +{ + int retry = 0; + + while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) { + udelay(10); + if (retry++ > 1000) { + netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n"); + return -EIO; + } + } + return 0; +} + static int c_can_set_bittiming(struct net_device *dev) { unsigned int reg_btr, reg_brpe, ctrl_save; @@ -573,6 +588,7 @@ static int c_can_set_bittiming(struct ne u32 ten_bit_brp; struct c_can_priv *priv = netdev_priv(dev); const struct can_bittiming *bt = &priv->can.bittiming; + int res; /* c_can provides a 6-bit brp and 4-bit brpe fields */ ten_bit_brp = bt->brp - 1; @@ -590,13 +606,17 @@ static int c_can_set_bittiming(struct ne "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe); ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG); - priv->write_reg(priv, C_CAN_CTRL_REG, - ctrl_save | CONTROL_CCE | CONTROL_INIT); + ctrl_save &= ~CONTROL_INIT; + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT); + res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT); + if (res) + return res; + priv->write_reg(priv, C_CAN_BTR_REG, reg_btr); priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe); priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save); - return 0; + return c_can_wait_for_ctrl_init(dev, priv, 0); } /* -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/