lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20140321000438.830631686@linuxfoundation.org>
Date:	Thu, 20 Mar 2014 17:03:37 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org, Chen-Yu Tsai <wens@...e.org>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 3.13 054/149] pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility

3.13-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@...e.org>

commit 905a5117e79367b7e58ae046d12ca9961f048c89 upstream.

On tha Allwinner A20 SoC, the external interrupts on the pin controller
device are connected to the GIC. Without chained_irq_{enter, exit},
external GPIO interrupts, such as used by mmc core card detect, cause
the system to hang.

This issue was first encountered during my attempt to get out-of-band
interrupts for WiFi on the Cubietruck working. With David's new series
of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card
detection, removing the SD card also causes my Cubietruck to hang. This
problem should extend to all Allwinner A20 based boards.

With this fix, the system no longer hangs when I remove or insert the
SD card. /proc/interrupts show that the interrupt has correctly fired.
However the system still does not detect card removal/insertion. I
believe this is another unrelated issue.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/pinctrl/pinctrl-sunxi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -665,6 +666,7 @@ static struct irq_chip sunxi_pinctrl_irq
 
 static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_get_chip(irq);
 	struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
 	const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
 
@@ -674,10 +676,12 @@ static void sunxi_pinctrl_irq_handler(un
 	if (reg) {
 		int irqoffset;
 
+		chained_irq_enter(chip, desc);
 		for_each_set_bit(irqoffset, &reg, SUNXI_IRQ_NUMBER) {
 			int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
 			generic_handle_irq(pin_irq);
 		}
+		chained_irq_exit(chip, desc);
 	}
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ