[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc7+ (root@gandalf) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #10 SMP PREEMPT Sat Mar 22 16:02:10 CET 2014 [ 0.000000] Command line: root=/dev/sda3 root=/dev/sda3 rootfstype=ext4 net.ifnames=0 snd-hda-intel.model=imac27 video=eDP-1:1920x1080MR@60e [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000008dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf672fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf673000-0x00000000bf6eefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf6ef000-0x00000000bf7f5fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf7f6000-0x00000000bf7fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Apple Inc. iMac11,2/Mac-F2238AC8, BIOS IM112.88Z.0057.B00.1005031455 05/03/10 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbf673 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0209c000, 0x0209cfff] PGTABLE [ 0.000000] BRK [0x0209d000, 0x0209dfff] PGTABLE [ 0.000000] BRK [0x0209e000, 0x0209efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13be00000-0x13bffffff] [ 0.000000] [mem 0x13be00000-0x13bffffff] page 2M [ 0.000000] BRK [0x0209f000, 0x0209ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x138000000-0x13bdfffff] [ 0.000000] [mem 0x138000000-0x13bdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x137ffffff] [ 0.000000] [mem 0x100000000-0x137ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf672fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf672fff] page 4k [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 APPLE ) [ 0.000000] ACPI: XSDT 00000000bf70e1c0 000084 (v01 APPLE Apple00 00000057 01000013) [ 0.000000] ACPI: FACP 00000000bf70b000 0000F4 (v04 APPLE Apple00 00000057 Loki 0000005F) [ 0.000000] ACPI: DSDT 00000000bf6ff000 00571C (v01 APPLE iMac 00110001 INTL 20061109) [ 0.000000] ACPI: FACS 00000000bf67a000 000040 [ 0.000000] ACPI: ASF! 00000000bf70d000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: HPET 00000000bf70a000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 00000000bf709000 0000BC (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: APIC 00000000bf708000 0000BC (v02 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SBST 00000000bf706000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: ECDT 00000000bf705000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 00000000bf6fa000 000518 (v01 APPLE UsbNoRmh 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bf6f7000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: MCFG 00000000bf707000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F) [ 0.000000] ACPI: SSDT 00000000bf6fe000 0000FA (v01 SataRe SataPri 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bf6fd000 0000FA (v01 SataRe SataSec 00001000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880137600000-ffff88013b5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13bffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008dfff] [ 0.000000] node 0: [mem 0x00090000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbf672fff] [ 0.000000] node 0: [mem 0x100000000-0x13bffffff] [ 0.000000] On node 0 totalpages: 1029647 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12186 pages used for memmap [ 0.000000] DMA32 zone: 779891 pages, LIFO batch:31 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 245760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf673000-0xbf6eefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf6ef000-0xbf7f5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7f6000-0xbf7fefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7ff000-0xbf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013bc00000 s79808 r8192 d22592 u262144 [ 0.000000] pcpu-alloc: s79808 r8192 d22592 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013536 [ 0.000000] Kernel command line: root=/dev/sda3 root=/dev/sda3 rootfstype=ext4 net.ifnames=0 snd-hda-intel.model=imac27 video=eDP-1:1920x1080MR@60e [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3962780K/4118588K available (8260K kernel code, 827K rwdata, 2616K rodata, 972K init, 832K bss, 155808K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3058.933 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.86 BogoMIPS (lpj=12235732) [ 0.000184] pid_max: default: 32768 minimum: 301 [ 0.000266] ACPI: Core revision 20131218 [ 0.002667] ACPI: All ACPI Tables successfully acquired [ 0.002849] Mount-cache hash table entries: 256 [ 0.003049] Initializing cgroup subsys blkio [ 0.003144] Disabled fast string operations [ 0.003223] CPU: Physical Processor ID: 0 [ 0.003300] CPU: Processor Core ID: 0 [ 0.003380] mce: CPU supports 9 MCE banks [ 0.003463] CPU0: Thermal LVT vector (0xfa) already installed [ 0.003469] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 6 [ 0.003703] Freeing SMP alternatives memory: 28K (ffffffff81fc3000 - ffffffff81fca000) [ 0.004206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.043998] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz (fam: 06, model: 25, stepping: 05) [ 0.150924] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.151168] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.151252] ... version: 3 [ 0.151330] ... bit width: 48 [ 0.151407] ... generic registers: 4 [ 0.151485] ... value mask: 0000ffffffffffff [ 0.151563] ... max period: 000000007fffffff [ 0.151642] ... fixed-purpose events: 3 [ 0.151720] ... event mask: 000000070000000f [ 0.174967] x86: Booting SMP configuration: [ 0.175045] .... node #0, CPUs: #1 [ 0.186107] Disabled fast string operations [ 0.186121] CPU1: Thermal LVT vector (0xfa) already installed [ 0.194991] #2 [ 0.206220] Disabled fast string operations [ 0.206233] CPU2: Thermal LVT vector (0xfa) already installed [ 0.226125] #3 [ 0.226125] Disabled fast string operations [ 0.226137] CPU3: Thermal LVT vector (0xfa) already installed [ 0.228252] x86: Booted up 1 node, 4 CPUs [ 0.228484] smpboot: Total of 4 processors activated (24471.46 BogoMIPS) [ 0.230476] devtmpfs: initialized [ 0.230748] PM: Registering ACPI NVS region [mem 0xbf673000-0xbf6eefff] (507904 bytes) [ 0.231059] NET: Registered protocol family 16 [ 0.231389] cpuidle: using governor ladder [ 0.231468] cpuidle: using governor menu [ 0.231580] ACPI: bus type PCI registered [ 0.231742] dca service started, version 1.12.1 [ 0.231855] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000) [ 0.231976] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820 [ 0.232458] PCI: Using configuration type 1 for base access [ 0.238749] bio: create slab at 0 [ 0.238925] ACPI: Added _OSI(Module Device) [ 0.239008] ACPI: Added _OSI(Processor Device) [ 0.239085] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.239164] ACPI: Added _OSI(Processor Aggregator Device) [ 0.239914] ACPI : EC: EC description table is found, configuring boot EC [ 0.242585] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.242926] ACPI: SSDT 00000000bf7f9598 0004FF (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.243244] ACPI: Dynamic OEM Table Load: [ 0.243399] ACPI: SSDT (null) 0004FF (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.243638] ACPI: SSDT 00000000bf7f7798 0006E5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.243945] ACPI: Dynamic OEM Table Load: [ 0.244100] ACPI: SSDT (null) 0006E5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.268399] ACPI: SSDT 00000000bf7f8c18 0003A4 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.268752] ACPI: Dynamic OEM Table Load: [ 0.268907] ACPI: SSDT (null) 0003A4 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.280309] ACPI: SSDT 00000000bf7f6d98 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.280634] ACPI: Dynamic OEM Table Load: [ 0.280788] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.292585] ACPI: Interpreter enabled [ 0.292666] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.293683] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.293890] ACPI: (supports S0 S3 S4 S5) [ 0.293967] ACPI: Using IOAPIC for interrupt routing [ 0.294093] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.307605] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.307690] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.307797] \_SB_.PCI0:_OSC invalid UUID [ 0.307797] _OSC request data:1 1f 0 [ 0.307800] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.308242] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-06] only partially covers this bridge [ 0.308410] PCI host bridge to bus 0000:00 [ 0.308489] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.308569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.308651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.308732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.308816] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] [ 0.308904] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000 [ 0.309007] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400 [ 0.309034] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.309077] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.309220] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300 [ 0.309254] pci 0000:00:1a.0: reg 0x20: [io 0x3100-0x311f] [ 0.309372] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320 [ 0.309390] pci 0000:00:1a.7: reg 0x10: [mem 0xd0505c00-0xd0505fff] [ 0.309464] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.309510] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.309640] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.309652] pci 0000:00:1b.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit] [ 0.309711] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.309756] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.309881] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.309938] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.309983] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.310111] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.310167] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.310214] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.310340] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400 [ 0.310396] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.310443] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.310574] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300 [ 0.310607] pci 0000:00:1d.0: reg 0x20: [io 0x30a0-0x30bf] [ 0.310725] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320 [ 0.310742] pci 0000:00:1d.7: reg 0x10: [mem 0xd0505800-0xd0505bff] [ 0.310816] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.310863] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.310988] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.311105] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100 [ 0.311274] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f [ 0.311286] pci 0000:00:1f.2: reg 0x10: [io 0x3128-0x312f] [ 0.311292] pci 0000:00:1f.2: reg 0x14: [io 0x3134-0x3137] [ 0.311298] pci 0000:00:1f.2: reg 0x18: [io 0x3120-0x3127] [ 0.311303] pci 0000:00:1f.2: reg 0x1c: [io 0x3130-0x3133] [ 0.311309] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x302f] [ 0.311315] pci 0000:00:1f.2: reg 0x24: [io 0xffe0-0xffef] [ 0.311419] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.311431] pci 0000:00:1f.3: reg 0x10: [mem 0xd0506000-0xd05060ff 64bit] [ 0.311447] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.311543] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.311561] pci 0000:00:1f.6: reg 0x10: [mem 0xd0504000-0xd0504fff 64bit] [ 0.311740] pci 0000:01:00.0: [1002:9488] type 00 class 0x030000 [ 0.311750] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.311758] pci 0000:01:00.0: reg 0x18: [mem 0xd0420000-0xd042ffff 64bit] [ 0.311763] pci 0000:01:00.0: reg 0x20: [io 0x2000-0x20ff] [ 0.311773] pci 0000:01:00.0: reg 0x30: [mem 0xd0400000-0xd041ffff pref] [ 0.311798] pci 0000:01:00.0: supports D1 D2 [ 0.311813] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.311941] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300 [ 0.311951] pci 0000:01:00.1: reg 0x10: [mem 0xd0430000-0xd0433fff 64bit] [ 0.311997] pci 0000:01:00.1: supports D1 D2 [ 0.312056] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.312137] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.312139] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.312141] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.312217] pci 0000:02:00.0: [14e4:1684] type 00 class 0x020000 [ 0.312238] pci 0000:02:00.0: reg 0x10: [mem 0xd0300000-0xd030ffff 64bit] [ 0.312289] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.312378] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.312411] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.320300] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.320381] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.320384] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.320388] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.320460] pci 0000:03:00.0: [168c:002a] type 00 class 0x028000 [ 0.320481] pci 0000:03:00.0: reg 0x10: [mem 0xd0200000-0xd020ffff 64bit] [ 0.320595] pci 0000:03:00.0: supports D1 [ 0.320596] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.320620] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.320740] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.320865] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.320946] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.320948] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd02fffff] [ 0.320952] pci 0000:00:1c.1: bridge window [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.321029] pci 0000:04:00.0: [104c:823e] type 01 class 0x060400 [ 0.321143] pci 0000:04:00.0: supports D1 D2 [ 0.328305] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.328386] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.328389] pci 0000:00:1c.2: bridge window [mem 0xd0100000-0xd01fffff] [ 0.328393] pci 0000:00:1c.2: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.328489] pci 0000:05:00.0: [104c:823f] type 00 class 0x0c0010 [ 0.328512] pci 0000:05:00.0: reg 0x10: [mem 0xd0104000-0xd01047ff] [ 0.328525] pci 0000:05:00.0: reg 0x14: [mem 0xd0100000-0xd0103fff] [ 0.328622] pci 0000:05:00.0: supports D1 D2 [ 0.328623] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot [ 0.328730] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.328819] pci 0000:04:00.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.328904] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.328990] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.328994] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.328995] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.328996] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.328997] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode) [ 0.329020] pci_bus 0000:00: on NUMA node 0 [ 0.329123] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. [ 0.329785] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. [ 0.330407] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.331066] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. [ 0.331687] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.332353] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled. [ 0.333014] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. [ 0.333677] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. [ 0.334284] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 0.334366] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.334453] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.334538] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.334702] PCI host bridge to bus 0000:ff [ 0.334781] pci_bus 0000:ff: root bus resource [bus ff] [ 0.334864] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000 [ 0.334916] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.334970] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.335018] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.335067] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.335115] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.335169] pci_bus 0000:ff: on NUMA node 0 [ 0.335214] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.335385] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.335582] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.335669] vgaarb: loaded [ 0.335743] vgaarb: bridge control possible 0000:01:00.0 [ 0.335925] SCSI subsystem initialized [ 0.336080] libata version 3.00 loaded. [ 0.336156] ACPI: bus type USB registered [ 0.336278] usbcore: registered new interface driver usbfs [ 0.336382] usbcore: registered new interface driver hub [ 0.336491] usbcore: registered new device driver usb [ 0.336627] Linux video capture interface: v2.00 [ 0.336755] pps_core: LinuxPPS API ver. 1 registered [ 0.336834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.336970] PTP clock support registered [ 0.337097] EDAC MC: Ver: 3.0.0 [ 0.337408] Advanced Linux Sound Architecture Driver Initialized. [ 0.337490] PCI: Using ACPI for IRQ routing [ 0.337569] PCI: pci_cache_line_size set to 64 bytes [ 0.337616] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff] [ 0.337617] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.337618] e820: reserve RAM buffer [mem 0xbf673000-0xbfffffff] [ 0.337761] NET: Registered protocol family 23 [ 0.337852] Bluetooth: Core ver 2.18 [ 0.337947] NET: Registered protocol family 31 [ 0.338026] Bluetooth: HCI device and connection manager initialized [ 0.338109] Bluetooth: HCI socket layer initialized [ 0.338188] Bluetooth: L2CAP socket layer initialized [ 0.338271] Bluetooth: SCO socket layer initialized [ 0.338430] cfg80211: Calling CRDA to update world regulatory domain [ 0.338582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.339016] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.341117] Switched to clocksource hpet [ 0.343596] pnp: PnP ACPI init [ 0.343690] ACPI: bus type PNP registered [ 0.343810] pnp 00:00: [dma 4] [ 0.343854] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.343898] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.344027] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.344112] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.344160] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.344219] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.344301] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.344384] system 00:04: [io 0xffff] has been reserved [ 0.344472] system 00:04: [io 0xffff] has been reserved [ 0.344552] system 00:04: [io 0x0400-0x047f] could not be reserved [ 0.344634] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.344715] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.344796] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.344868] system 00:05: [io 0x06a0-0x06af] has been reserved [ 0.344950] system 00:05: [io 0x06b0-0x06ff] has been reserved [ 0.345032] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.345077] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.345133] pnp 00:07: Plug and Play ACPI device, IDs APP0001 (active) [ 0.345321] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.345404] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.345488] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.345570] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.345652] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.345734] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.345816] system 00:08: [mem 0xfeb00000-0xfeb03fff] has been reserved [ 0.345898] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.345980] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.346064] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.346148] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346257] pnp: PnP ACPI: found 9 devices [ 0.346334] ACPI: bus type PNP unregistered [ 0.354288] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.354370] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.354452] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd04fffff] [ 0.354536] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.354624] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0600000-0xd060ffff pref] [ 0.354708] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.354788] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.354870] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff] [ 0.354955] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.355042] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.355122] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.355206] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd02fffff] [ 0.355290] pci 0000:00:1c.1: bridge window [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.355377] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.355462] pci 0000:04:00.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.355553] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.355633] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.355716] pci 0000:00:1c.2: bridge window [mem 0xd0100000-0xd01fffff] [ 0.355800] pci 0000:00:1c.2: bridge window [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.355887] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.355968] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.356056] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.356057] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.356058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.356059] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff] [ 0.356060] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.356061] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd04fffff] [ 0.356062] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.356063] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.356064] pci_bus 0000:02: resource 1 [mem 0xd0300000-0xd03fffff] [ 0.356065] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref] [ 0.356066] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.356067] pci_bus 0000:03: resource 1 [mem 0xd0200000-0xd02fffff] [ 0.356068] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref] [ 0.356070] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.356071] pci_bus 0000:04: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.356072] pci_bus 0000:04: resource 2 [mem 0xd0a00000-0xd0bfffff 64bit pref] [ 0.356073] pci_bus 0000:05: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.356074] pci_bus 0000:06: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.356075] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 0.356076] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 0.356077] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 0.356078] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfeafffff] [ 0.356106] NET: Registered protocol family 2 [ 0.356282] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.356411] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.356573] TCP: Hash tables configured (established 32768 bind 32768) [ 0.356682] TCP: reno registered [ 0.356759] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356852] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.356980] NET: Registered protocol family 1 [ 0.357430] pci 0000:01:00.0: Boot video device [ 0.357442] PCI: CLS mismatch (256 != 64), using 64 bytes [ 0.357455] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.357538] software IO TLB [mem 0xbb673000-0xbf673000] (64MB) mapped at [ffff8800bb673000-ffff8800bf672fff] [ 0.357874] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x4 [ 0.357959] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x4 [ 0.358043] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x4 [ 0.358128] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x4 [ 0.358260] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.359057] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 0.359158] PCLMULQDQ-NI instructions are not detected. [ 0.359238] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation [ 0.359357] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation [ 0.359475] AVX or AES-NI instructions are not detected. [ 0.359556] AVX instructions are not detected. [ 0.359634] AVX2 or AES-NI instructions are not detected. [ 0.360178] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.360305] audit: initializing netlink subsys (disabled) [ 0.360394] audit: type=2000 audit(1395500771.244:1): initialized [ 0.360739] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.363909] NTFS driver 2.1.30 [Flags: R/W]. [ 0.364108] msgmni has been set to 7739 [ 0.364748] NET: Registered protocol family 38 [ 0.364827] Key type asymmetric registered [ 0.364905] Asymmetric key parser 'x509' registered [ 0.365051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.365145] io scheduler noop registered [ 0.365223] io scheduler deadline registered [ 0.365346] io scheduler cfq registered (default) [ 0.365588] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.366659] intel_idle: MWAIT substates: 0x1120 [ 0.366660] intel_idle: v0.4 model 0x25 [ 0.366660] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.366797] ipmi message handler version 39.2 [ 0.366879] ipmi device interface [ 0.366981] IPMI Watchdog: driver initialized [ 0.367155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.367243] ACPI: Power Button [PWRB] [ 0.367375] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.367461] ACPI: Sleep Button [SLPB] [ 0.367592] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.367676] ACPI: Power Button [PWRF] [ 0.367852] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS [ 0.367942] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.368677] acpi device:03: registered as cooling_device0 [ 0.368809] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3 [ 0.369449] GHES: HEST is not enabled! [ 0.369527] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.369704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.370255] lp: driver loaded but no devices found [ 0.371328] Non-volatile memory driver v1.3 [ 0.371461] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.371580] Hangcheck: Using getrawmonotonic(). [ 0.373843] brd: module loaded [ 0.374825] loop: module loaded [ 0.375012] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258) [ 0.375258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.375382] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 0.375626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.375747] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 0.375992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.376114] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258) [ 0.376359] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.376480] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.376777] ata_piix 0000:00:1f.2: version 2.13 [ 0.376864] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.530129] scsi0 : ata_piix [ 0.530350] scsi1 : ata_piix [ 0.530517] ata1: SATA max UDMA/133 cmd 0x3128 ctl 0x3134 bmdma 0x3020 irq 19 [ 0.530603] ata2: SATA max UDMA/133 cmd 0x3120 ctl 0x3130 bmdma 0x3028 irq 19 [ 0.531057] tg3.c:v3.136 (Jan 03, 2014) [ 0.628814] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95764m) rev 5784100] (PCI Express) MAC address c4:2c:03:04:79:f7 [ 0.628938] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 0.629060] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.629145] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.059500] ath: EEPROM regdomain: 0x37 [ 1.059501] ath: EEPROM indicates we should expect a direct regpair map [ 1.059502] ath: Country alpha2 being used: AW [ 1.059503] ath: Regpair used: 0x37 [ 1.059504] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 1.059505] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059506] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 1.059506] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059507] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 1.059508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059508] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 1.059509] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059509] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 1.059510] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059510] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 1.059511] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059512] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 1.059512] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059513] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 1.059513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059514] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 1.059515] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059515] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 1.059516] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059516] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 1.059517] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 1.059517] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits it [ 1.059518] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits it [ 1.059518] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it [ 1.059519] cfg80211: Updating information on frequency 5180 MHz with regulatory rule: [ 1.059520] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059520] cfg80211: Updating information on frequency 5200 MHz with regulatory rule: [ 1.059521] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059521] cfg80211: Updating information on frequency 5220 MHz with regulatory rule: [ 1.059522] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059522] cfg80211: Updating information on frequency 5240 MHz with regulatory rule: [ 1.059523] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059524] cfg80211: Updating information on frequency 5260 MHz with regulatory rule: [ 1.059524] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059525] cfg80211: Updating information on frequency 5280 MHz with regulatory rule: [ 1.059525] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059526] cfg80211: Updating information on frequency 5300 MHz with regulatory rule: [ 1.059526] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059527] cfg80211: Updating information on frequency 5320 MHz with regulatory rule: [ 1.059528] cfg80211: 5140000 KHz - 5360000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059528] cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits it [ 1.059529] cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits it [ 1.059529] cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits it [ 1.059530] cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits it [ 1.059530] cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits it [ 1.059530] cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits it [ 1.059531] cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits it [ 1.059531] cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits it [ 1.059532] cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits it [ 1.059532] cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits it [ 1.059533] cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits it [ 1.059533] cfg80211: Updating information on frequency 5745 MHz with regulatory rule: [ 1.059534] cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059534] cfg80211: Updating information on frequency 5765 MHz with regulatory rule: [ 1.059535] cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059535] cfg80211: Updating information on frequency 5785 MHz with regulatory rule: [ 1.059536] cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059537] cfg80211: Updating information on frequency 5805 MHz with regulatory rule: [ 1.059537] cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.059538] cfg80211: Updating information on frequency 5825 MHz with regulatory rule: [ 1.059538] cfg80211: 5715000 KHz - 5860000 KHz @ 80000 KHz), (N/A mBi, 3000 mBm) [ 1.065245] cfg80211: Ignoring regulatory request set by core since the driver uses its own custom regulatory domain [ 1.065272] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 1.065512] cfg80211: Pending regulatory request, waiting for it to be processed... [ 1.065581] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900007a0000, irq=17 [ 1.121734] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2 [ 1.122187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.122270] ehci-pci: EHCI PCI platform driver [ 1.122446] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.122583] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.122677] ehci-pci 0000:00:1a.7: debug port 2 [ 1.126659] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.126670] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd0505c00 [ 1.137726] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.137831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.137913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.137997] usb usb1: Product: EHCI Host Controller [ 1.138076] usb usb1: Manufacturer: Linux 3.14.0-rc7+ ehci_hcd [ 1.138156] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.138373] hub 1-0:1.0: USB hub found [ 1.138455] hub 1-0:1.0: 6 ports detected [ 1.138732] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.138873] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.138966] ehci-pci 0000:00:1d.7: debug port 2 [ 1.142936] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.142946] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0505800 [ 1.153735] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.153837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.153952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.154035] usb usb2: Product: EHCI Host Controller [ 1.154115] usb usb2: Manufacturer: Linux 3.14.0-rc7+ ehci_hcd [ 1.154195] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.154541] hub 2-0:1.0: USB hub found [ 1.154622] hub 2-0:1.0: 8 ports detected [ 1.154911] uhci_hcd: USB Universal Host Controller Interface driver [ 1.155005] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup! [ 1.155092] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19 [ 1.155178] uhci_hcd 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup! [ 1.155264] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -19 [ 1.155879] usbcore: registered new interface driver usblp [ 1.156069] usbcore: registered new interface driver usb-storage [ 1.156210] usbcore: registered new interface driver ums-sddr09 [ 1.156394] usbcore: registered new interface driver ums-sddr55 [ 1.156581] usbcore: registered new interface driver appledisplay [ 1.156775] usbcore: registered new interface driver isight_firmware [ 1.157179] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.450011] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.622262] firewire_core 0000:05:00.0: created device fw0: GUID e80688fffebea1f8, S800 [ 1.670251] tsc: Refined TSC clocksource calibration: 3058.999 MHz [ 1.878299] ata2.01: failed to resume link (SControl 0) [ 1.882273] ata1.01: failed to resume link (SControl 0) [ 2.034486] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.034573] ata2.01: SATA link down (SStatus 4 SControl 0) [ 2.034658] ata2.01: link offline, clearing class 3 to NONE [ 2.038492] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.038579] ata1.01: SATA link down (SStatus 4 SControl 0) [ 2.042560] ata2.00: ATAPI: HL-DT-STDVDRW GA32N, KC09, max UDMA/100 [ 2.047068] ata1.00: ATA-8: WDC WD5000AAKS-40V6A0, 05.01D06, max UDMA/133 [ 2.047150] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.058576] ata2.00: configured for UDMA/100 [ 2.063067] ata1.00: configured for UDMA/133 [ 2.063238] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-4 05.0 PQ: 0 ANSI: 5 [ 2.063526] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.063643] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.063651] sd 0:0:0:0: [sda] Write Protect is off [ 2.063653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.063669] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.184037] i8042: No controller found [ 2.184046] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 2.184047] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.184322] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GA32N KC09 PQ: 0 ANSI: 5 [ 2.184438] mousedev: PS/2 mouse device common for all mice [ 2.184476] hub 1-1:1.0: USB hub found [ 2.184584] hub 1-1:1.0: 4 ports detected [ 2.185018] usbcore: registered new interface driver appletouch [ 2.185128] usbcore: registered new interface driver bcm5974 [ 2.185299] rtc_cmos 00:06: RTC can wake from S4 [ 2.185519] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.185620] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.185728] i2c /dev entries driver [ 2.185958] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 2.186192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.186403] usbcore: registered new interface driver uvcvideo [ 2.186479] USB Video Class driver (1.1.1) [ 2.193488] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.193568] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.193805] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.193918] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.223550] sda: sda1 sda2 sda3 sda4 [ 2.224196] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.298630] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.423890] applesmc: key=276 fan=3 temp=35 index=34 acc=0 lux=0 kbd=0 [ 2.424402] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 2.424491] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 2.424600] iTCO_vendor_support: vendor-support=0 [ 2.424709] usbcore: registered new interface driver btusb [ 2.424903] sdhci: Secure Digital Host Controller Interface driver [ 2.424980] sdhci: Copyright(c) Pierre Ossman [ 2.425540] hidraw: raw HID events driver (C) Jiri Kosina [ 2.426046] usbcore: registered new interface driver usbhid [ 2.426121] usbhid: USB HID core driver [ 2.426531] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X [ 2.426626] snd_hda_intel 0000:01:00.1: irq 42 for MSI/MSI-X [ 2.426755] GACT probability NOT on [ 2.426833] u32 classifier [ 2.426904] Actions configured [ 2.426979] Netfilter messages via NETLINK v0.30. [ 2.427065] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.427244] ctnetlink v0.93: registering with nfnetlink. [ 2.427369] xt_time: kernel timezone is -0000 [ 2.427448] ip_set: protocol 6 [ 2.427737] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.427863] TCP: cubic registered [ 2.427938] Initializing XFRM netlink socket [ 2.428189] NET: Registered protocol family 10 [ 2.428734] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4 [ 2.429157] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.429478] sit: IPv6 over IPv4 tunneling driver [ 2.429727] NET: Registered protocol family 17 [ 2.429809] NET: Registered protocol family 15 [ 2.429888] IrCOMM protocol (Dag Brattli) [ 2.431012] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 2.431096] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.431436] hub 2-1:1.0: USB hub found [ 2.431636] hub 2-1:1.0: 4 ports detected [ 2.435518] Bluetooth: RFCOMM socket layer initialized [ 2.435604] Bluetooth: RFCOMM ver 1.11 [ 2.435685] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.435767] Bluetooth: HIDP socket layer initialized [ 2.436272] registered taskstats version 1 [ 2.437370] PM: Hibernation image not present or could not be loaded. [ 2.437371] ALSA device list: [ 2.437447] #1: HDA ATI HDMI at 0xd0430000 irq 42 [ 2.438014] input: HDA Intel MID SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 2.438296] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 2.438499] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 2.521607] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 2.521699] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 2.523035] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.564025] devtmpfs: mounted [ 2.564800] Freeing unused kernel memory: 972K (ffffffff81ed0000 - ffffffff81fc3000) [ 2.564880] Write protecting the kernel read-only data: 14336k [ 2.568836] Freeing unused kernel memory: 1968K (ffff880001814000 - ffff880001a00000) [ 2.571547] Freeing unused kernel memory: 1480K (ffff880001c8e000 - ffff880001e00000) [ 2.617167] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500 [ 2.618075] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.618155] usb 1-1.1: Product: BRCM2046 Hub [ 2.618231] usb 1-1.1: Manufacturer: Apple Inc. [ 2.618990] hub 1-1.1:1.0: USB hub found [ 2.619321] hub 1-1.1:1.0: 3 ports detected [ 2.670990] Switched to clocksource tsc [ 2.707167] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [ 2.820378] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=8403 [ 2.820471] usb 1-1.2: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 2.820550] usb 1-1.2: Product: Card Reader [ 2.820623] usb 1-1.2: Manufacturer: Apple [ 2.820698] usb 1-1.2: SerialNumber: 000000009833 [ 2.821835] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 2.822151] scsi2 : usb-storage 1-1.2:1.0 [ 2.907319] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 3.016381] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=8502 [ 3.016469] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.016547] usb 2-1.1: Product: Built-in iSight [ 3.016622] usb 2-1.1: Manufacturer: Apple Inc. [ 3.016696] usb 2-1.1: SerialNumber: 8TA5G22VRDDQ2L00 [ 3.017864] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502) [ 3.023406] input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input8 [ 3.111472] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 3.225172] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=8242 [ 3.225262] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.225341] usb 2-1.2: Product: IR Receiver [ 3.225415] usb 2-1.2: Manufacturer: Apple Computer, Inc. [ 3.232049] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2:1.0/0003:05AC:8242.0001/input/input9 [ 3.232659] appleir 0003:05AC:8242.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.2/input0 [ 3.319625] usb 2-1.3: new full-speed USB device number 5 using ehci-pci [ 3.413525] usb 2-1.3: New USB device found, idVendor=067b, idProduct=2305 [ 3.413616] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.413693] usb 2-1.3: Product: IEEE-1284 Controller [ 3.413768] usb 2-1.3: Manufacturer: Prolific Technology Inc. [ 3.420070] usblp 2-1.3:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 3.491725] usb 1-1.1.1: new full-speed USB device number 5 using ehci-pci [ 3.589534] usb 1-1.1.1: New USB device found, idVendor=05ac, idProduct=8215 [ 3.589625] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.589703] usb 1-1.1.1: Product: Bluetooth USB Host Controller [ 3.589779] usb 1-1.1.1: Manufacturer: Apple Inc. [ 3.589853] usb 1-1.1.1: SerialNumber: 7C6D629FDB2D [ 3.821736] scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.822374] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.823955] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 3.834315] random: nonblocking pool is initialized [ 5.563403] systemd-udevd[1394]: starting version 208 [ 6.239086] [drm] Initialized drm 1.1.0 20060810 [ 7.264508] [drm] radeon kernel modesetting enabled. [ 7.264784] [drm] initializing kernel modesetting (RV730 0x1002:0x9488 0x106B:0x00B6). [ 7.264804] [drm] register mmio base: 0xD0420000 [ 7.264804] [drm] register mmio size: 65536 [ 7.264836] radeon 0000:01:00.0: Invalid ROM contents [ 7.264852] ATOM BIOS: 113 [ 7.264917] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 7.264918] radeon 0000:01:00.0: GTT: 1024M 0x0000000010000000 - 0x000000004FFFFFFF [ 7.264919] [drm] Detected VRAM RAM=256M, BAR=256M [ 7.264919] [drm] RAM width 128bits DDR [ 7.264967] [TTM] Zone kernel: Available graphics memory: 1983614 kiB [ 7.264969] [TTM] Initializing pool allocator [ 7.264972] [TTM] Initializing DMA pool allocator [ 7.264988] [drm] radeon: 256M of VRAM memory ready [ 7.264989] [drm] radeon: 1024M of GTT memory ready. [ 7.264998] [drm] Loading RV730 Microcode [ 7.430532] [drm] Special thermal controller config [ 7.430578] [drm:radeon_pm_init_dpm] *ERROR* radeon: dpm initialization failed [ 7.465059] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 7.466093] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 7.472939] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000). [ 7.472992] radeon 0000:01:00.0: WB enabled [ 7.472994] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8801361f4c00 [ 7.472996] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8801361f4c0c [ 7.473613] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90000d1c598 [ 7.473614] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.473615] [drm] Driver supports precise vblank timestamp query. [ 7.473635] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 7.473646] radeon 0000:01:00.0: radeon: using MSI. [ 7.473671] [drm] radeon: irq initialized. [ 7.520050] [drm] ring test on 0 succeeded in 1 usecs [ 7.520108] [drm] ring test on 3 succeeded in 1 usecs [ 7.694911] [drm] ring test on 5 succeeded in 1 usecs [ 7.694915] [drm] UVD initialized successfully. [ 7.695158] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.695179] [drm] ib test on ring 3 succeeded in 0 usecs [ 17.850240] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec [ 17.850245] radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000002 last fence id 0x0000000000000000 on ring 5) [ 17.850248] [drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35). [ 17.850252] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35). [ 17.851869] [drm] radeon atom DIG backlight initialized [ 17.851871] [drm] Radeon Display Connectors [ 17.851871] [drm] Connector 0: [ 17.851872] [drm] DP-1 [ 17.851872] [drm] HPD1 [ 17.851873] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 17.851874] [drm] Encoders: [ 17.851874] [drm] DFP1: INTERNAL_UNIPHY [ 17.851875] [drm] Connector 1: [ 17.851875] [drm] eDP-1 [ 17.851876] [drm] HPD2 [ 17.851876] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 17.851877] [drm] Encoders: [ 17.851877] [drm] LCD1: INTERNAL_UNIPHY [ 17.851877] [drm] Connector 2: [ 17.851878] [drm] VGA-1 [ 17.851879] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 17.851879] [drm] Encoders: [ 17.851880] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 17.937431] [drm] fb mappable at 0xC0460000 [ 17.937432] [drm] vram apper at 0xC0000000 [ 17.937433] [drm] size 8294400 [ 17.937433] [drm] fb depth is 24 [ 17.937434] [drm] pitch is 7680 [ 17.937639] fbcon: radeondrmfb (fb0) is primary device [ 17.958798] Console: switching to colour frame buffer device 240x67 [ 17.963139] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 17.963140] radeon 0000:01:00.0: registered panic notifier [ 17.963149] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0 [ 18.897834] EXT4-fs (sda3): re-mounted. Opts: (null) [ 19.082817] Adding 7812092k swap on /dev/sda4. Priority:-1 extents:1 across:7812092k [ 21.169262] tg3 0000:02:00.0: irq 44 for MSI/MSI-X [ 21.953410] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.322684] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 24.322687] tg3 0000:02:00.0 eth0: Flow control is off for TX and off for RX [ 24.322700] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.134546] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.251055] cfg80211: Pending regulatory request, waiting for it to be processed... [ 32.345116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 32.346736] wlan0: Trigger new scan to find an IBSS to join [ 32.392023] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. [ 32.456926] cfg80211: Pending regulatory request, waiting for it to be processed... [ 35.041609] wlan0: Trigger new scan to find an IBSS to join [ 37.139959] wlan0: Trigger new scan to find an IBSS to join [ 39.215427] wlan0: Trigger new scan to find an IBSS to join [ 39.394793] wlan0: Creating new IBSS network, BSSID ce:67:8d:ee:04:89 [ 39.401825] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.597018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 40.597040] cfg80211: Pending regulatory request, waiting for it to be processed... [ 41.751202] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 47.704108] radeon 0000:01:00.0: GPU reset succeeded, trying to resume [ 47.814844] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 47.816942] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000). [ 47.816977] radeon 0000:01:00.0: WB enabled [ 47.816979] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8801361f4c00 [ 47.816981] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8801361f4c0c [ 47.817597] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90000d1c598 [ 47.863708] [drm] ring test on 0 succeeded in 1 usecs [ 47.863766] [drm] ring test on 3 succeeded in 1 usecs [ 48.038555] [drm] ring test on 5 succeeded in 1 usecs [ 48.038559] [drm] UVD initialized successfully. [ 48.038585] [drm] ib test on ring 0 succeeded in 0 usecs [ 48.038607] [drm] ib test on ring 3 succeeded in 1 usecs [ 58.192367] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec [ 58.192371] radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000004 last fence id 0x0000000000000000 on ring 5) [ 58.192373] [drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35). [ 58.192377] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35). [ 58.192405] [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed [ 64.512303] apple 0005:05AC:023A.0002: unknown main item tag 0x0 [ 66.574610] input: gandalf kbd as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/bluetooth/hci0/hci0:11/0005:05AC:023A.0002/input/input10 [ 66.574812] apple 0005:05AC:023A.0002: input,hidraw1: BLUETOOTH HID v0.50 Keyboard [gandalf kbd] on 7c:6d:62:9f:db:2d [ 67.093799] magicmouse 0005:05AC:030D.0003: unknown main item tag 0x0 [ 67.176028] input: gandalf mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/bluetooth/hci0/hci0:12/0005:05AC:030D.0003/input/input11 [ 67.176191] magicmouse 0005:05AC:030D.0003: input,hidraw2: BLUETOOTH HID v0.84 Mouse [gandalf mouse] on 7c:6d:62:9f:db:2d