[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAErSpo71-t_c1dh_B7-HJD45Yd_0WZr1pUK6cn4uOtPUiGQ7Jw@mail.gmail.com>
Date: Mon, 24 Mar 2014 16:04:29 -0600
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Andy Lutomirski <luto@...capital.net>
Cc: Alex Deucher <alexdeucher@...il.com>,
DRI <dri-devel@...ts.freedesktop.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>
Subject: Re: 3.14 radeon regression: radeon is broken (pci bug?)
On Sat, Mar 22, 2014 at 9:18 AM, Andy Lutomirski <luto@...capital.net> wrote:
> On Fri, Mar 21, 2014 at 9:37 AM, Bjorn Helgaas <bhelgaas@...gle.com> wrote:
>> On Fri, Mar 21, 2014 at 9:49 AM, Andy Lutomirski <luto@...capital.net> wrote:
>>> On Fri, Mar 21, 2014 at 7:41 AM, Alex Deucher <alexdeucher@...il.com> wrote:
>>>> On Thu, Mar 20, 2014 at 10:17 PM, Andy Lutomirski <luto@...capital.net> wrote:
>>>>> My system works on a 3.13 Fedora kernel. It does not work on a
>>>>> more-or-less identically configured 3.14-rc7+ kernel. The symptom is
>>>>> that the Plymouth password prompt flashes and them the screen goes
>>>>> blank. Hitting escape brings back the text console, and all is well
>>>>> until X tries to start. Then I get a blank screen. killall -9 Xorg
>>>>> from ssh causes these errors to be logged:
>>>>>
>>>>>
>>>>> [ 226.239747] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>> more than 5secs aborting
>>>>> [ 226.239751] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>> executing CD34 (len 55, WS 0, PS 0) @ 0xCD57
>>>>> [ 231.241492] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>> more than 5secs aborting
>>>>> [ 231.241496] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>> [ 236.243111] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>> more than 5secs aborting
>>>>> [ 236.243115] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>> [ 241.244625] [drm:atom_op_jump] *ERROR* atombios stuck in loop for
>>>>> more than 5secs aborting
>>>>> [ 241.244628] [drm:atom_execute_table_locked] *ERROR* atombios stuck
>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88
>>>>>
>>>>>
>>>>> lspci -vvvxxxnn on 3.14-rc7+ says:
>>>>>
>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779]
>>>>> (rev ff) (prog-if ff)
>>>>> !!! Unknown header type 7f
>>>>> Kernel driver in use: radeon
>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>
>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98] (rev ff)
>>>>> (prog-if ff)
>>>>> !!! Unknown header type 7f
>>>>> Kernel driver in use: snd_hda_intel
>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>>>>>
>>>>> (oops!)
>>>>>
>>>>> On 3.13, it says:
>>>>>
>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779]
>>>>> (prog-if 00 [VGA controller])
>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD
>>>>> 6450 1 GB DDR3 [174b:e164]
>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>> Latency: 0, Cache Line Size: 64 bytes
>>>>> Interrupt: pin A routed to IRQ 92
>>>>> Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>>>>> Region 2: Memory at f4a20000 (64-bit, non-prefetchable) [size=128K]
>>>>> Region 4: I/O ports at c000 [size=256]
>>>>> Expansion ROM at f4a00000 [disabled] [size=128K]
>>>>> Capabilities: <access denied>
>>>>> Kernel driver in use: radeon
>>>>> 00: 02 10 79 67 07 04 10 00 00 00 00 03 10 00 80 00
>>>>> 10: 0c 00 00 e0 00 00 00 00 04 00 a2 f4 00 00 00 00
>>>>> 20: 01 c0 00 00 00 00 00 00 00 00 00 00 4b 17 64 e1
>>>>> 30: 00 00 a0 f4 50 00 00 00 00 00 00 00 0a 01 00 00
>>>>>
>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI]
>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98]
>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD
>>>>> 6450 1GB DDR3 [174b:aa98]
>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>> Latency: 0, Cache Line Size: 64 bytes
>>>>> Interrupt: pin B routed to IRQ 96
>>>>> Region 0: Memory at f4a40000 (64-bit, non-prefetchable) [size=16K]
>>>>> Capabilities: <access denied>
>>>>> Kernel driver in use: snd_hda_intel
>>>>> 00: 02 10 98 aa 06 04 10 00 00 00 03 04 10 00 80 00
>>>>> 10: 04 00 a4 f4 00 00 00 00 00 00 00 00 00 00 00 00
>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 98 aa
>>>>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00
>>>>>
>>>>> Logs attached.
>>
>> Hi Andy,
>>
>> I'm really sorry that you tripped over this, but thanks a lot for the
>> report. Is there any chance the box is currently running v3.13, and
>> you could collect the dmesg log from it? I don't see anything unusual
>> from a PCI perspective in the v3.14-rc7 dmesg; all the PCI device
>> resources look fine, and we didn't reassign anything. It seems like
>> the 0000:09:00.x devices just stopped responding for some reason, and
>> the PCI core shouldn't really be involved after the radeon driver
>> claims and enables those devices. But it's possible I'd get a clue by
>> comparing the v3.13 and v3.14-rc7 dmesg logs.
>
> Attached. I also clearly screwed something up about my 3.14 config --
> I meant for it to match the Fedora config, but it doesn't. At least
> NR_CPUs is too low. That shoudn't break radeon, but maybe something
> odd happens.
>
> 3.14 also complains that it can't find an AGP bridge. 3.13 does not
> complain about that.
CONFIG_GART_IOMMU is not defined for the 3.13.6-200.rc20.x86_64
kernel, but apparently it is for your v3.14-rc7 kernel. That explains
the "No AGP bridge found" difference.
I'm afraid I still can't shed any light on the problem with the radeon device.
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists