| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1395768375-21123-5-git-send-email-b.zolnierkie@samsung.com>
Date: Tue, 25 Mar 2014 18:26:15 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Tejun Heo <tj@...nel.org>
Cc: Hans de Goede <hdegoede@...hat.com>, Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...prootsystems.com>,
Viresh Kumar <viresh.linux@...il.com>,
Shiraz Hashim <shiraz.hashim@...com>,
linux-ide@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
davinci-linux-open-source@...ux.davincidsp.com,
spear-devel@...t.st.com, b.zolnierkie@...sung.com
Subject: [PATCH v3 4/4] ARM: davinci: da850: update SATA AHCI support
Update SATA AHCI support to make use of the new ahci_da850 host
driver (instead of the generic ahci_platform one) and remove
deprecated ahci_platform_data code.
Cc: Sekhar Nori <nsekhar@...com>
Cc: Kevin Hilman <khilman@...prootsystems.com>
Cc: Hans de Goede <hdegoede@...hat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
v3:
- new patch
arch/arm/mach-davinci/da850.c | 2 +-
arch/arm/mach-davinci/devices-da8xx.c | 99 +++--------------------------------
2 files changed, 9 insertions(+), 92 deletions(-)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 2ab0043..85399c9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
- CLK("ahci", NULL, &sata_clk),
+ CLK("ahci_da850", NULL, &sata_clk),
CLK("davinci-rproc.0", NULL, &dsp_clk),
CLK("ehrpwm", "fck", &ehrpwm_clk),
CLK("ehrpwm", "tbclk", &ehrpwm_tbclk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 0486cdf2..56ea41d 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -1020,7 +1020,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
}
#ifdef CONFIG_ARCH_DAVINCI_DA850
-
static struct resource da850_sata_resources[] = {
{
.start = DA850_SATA_BASE,
@@ -1028,103 +1027,22 @@ static struct resource da850_sata_resources[] = {
.flags = IORESOURCE_MEM,
},
{
+ .start = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+ .end = DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
.start = IRQ_DA850_SATAINT,
.flags = IORESOURCE_IRQ,
},
};
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG 0x178
-
-#define SATA_PHY_MPY(x) ((x) << 0)
-#define SATA_PHY_LOS(x) ((x) << 6)
-#define SATA_PHY_RXCDR(x) ((x) << 10)
-#define SATA_PHY_RXEQ(x) ((x) << 13)
-#define SATA_PHY_TXSWING(x) ((x) << 19)
-#define SATA_PHY_ENPLL(x) ((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
- KHZ_TO_HZ(300000),
- KHZ_TO_HZ(250000),
- 0, /* Reserved */
- KHZ_TO_HZ(187500),
- KHZ_TO_HZ(150000),
- KHZ_TO_HZ(125000),
- KHZ_TO_HZ(120000),
- KHZ_TO_HZ(100000),
- KHZ_TO_HZ(75000),
- KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
- int i, ret;
- unsigned int val;
-
- da850_sata_clk = clk_get(dev, NULL);
- if (IS_ERR(da850_sata_clk))
- return PTR_ERR(da850_sata_clk);
-
- ret = clk_prepare_enable(da850_sata_clk);
- if (ret)
- goto err0;
-
- /* Enable SATA clock receiver */
- val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
- val &= ~BIT(0);
- __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
- /* Get the multiplier needed for 1.5GHz PLL output */
- for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
- if (da850_sata_xtal[i] == da850_sata_refclkpn)
- break;
-
- if (i == ARRAY_SIZE(da850_sata_xtal)) {
- ret = -EINVAL;
- goto err1;
- }
-
- val = SATA_PHY_MPY(i + 1) |
- SATA_PHY_LOS(1) |
- SATA_PHY_RXCDR(4) |
- SATA_PHY_RXEQ(1) |
- SATA_PHY_TXSWING(3) |
- SATA_PHY_ENPLL(1);
-
- __raw_writel(val, addr + SATA_P0PHYCR_REG);
-
- return 0;
-
-err1:
- clk_disable_unprepare(da850_sata_clk);
-err0:
- clk_put(da850_sata_clk);
- return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
- clk_disable_unprepare(da850_sata_clk);
- clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
- .init = da850_sata_init,
- .exit = da850_sata_exit,
-};
-
static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
static struct platform_device da850_sata_device = {
- .name = "ahci",
+ .name = "ahci_da850",
.id = -1,
.dev = {
- .platform_data = &da850_sata_pdata,
.dma_mask = &da850_sata_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
int __init da850_register_sata(unsigned long refclkpn)
{
- da850_sata_refclkpn = refclkpn;
- if (!da850_sata_refclkpn)
- return -EINVAL;
+ /* please see comment in drivers/ata/ahci_da850.c */
+ BUG_ON(refclkpn != 100 * 1000 * 1000);
return platform_device_register(&da850_sata_device);
}
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists