early console in setup code early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.14.0-rc8-wl-03045-gdf16ea4 (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #6 PREEMPT Wed Mar 26 14:11:00 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [c00fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x02bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k [ 0.000000] BRK [0x0262d000, 0x0262dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k [ 0.000000] BRK [0x0262e000, 0x0262efff] PGTABLE [ 0.000000] BRK [0x0262f000, 0x0262ffff] PGTABLE [ 0.000000] BRK [0x02630000, 0x02630fff] PGTABLE [ 0.000000] BRK [0x02631000, 0x02631fff] PGTABLE [ 0.000000] BRK [0x02632000, 0x02632fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0fcbd000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 000040 [ 0.000000] ACPI: SSDT 0ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 600 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 23ca580 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-c0-03261337/linux-devel:devel-hourly-2014032612/.vmlinuz-df16ea4de143a63d0f598003bde671cc277390e0-20140326141245-5-athens branch=linux-devel/devel-hourly-2014032612 BOOT_IMAGE=/kernel/i386-randconfig-c0-03261337/df16ea4de143a63d0f598003bde671cc277390e0/vmlinuz-3.14.0-rc8-wl-03045-gdf16ea4 drbd.minor_count=8 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 229704K/261744K available (14930K kernel code, 1030K rwdata, 5248K rodata, 620K init, 780K bss, 32040K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xffbfe000 ( 756 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xc24b8000 - 0xc2553000 ( 620 kB) [ 0.000000] .data : 0xc1e94ee6 - 0xc24b7a00 (6282 kB) [ 0.000000] .text : 0xc1000000 - 0xc1e94ee6 (14931 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=cf006000 soft=cf008000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Linux version 3.14.0-rc8-wl-03045-gdf16ea4 (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #6 PREEMPT Wed Mar 26 14:11:00 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [c00fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x02bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k [ 0.000000] BRK [0x0262d000, 0x0262dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k [ 0.000000] BRK [0x0262e000, 0x0262efff] PGTABLE [ 0.000000] BRK [0x0262f000, 0x0262ffff] PGTABLE [ 0.000000] BRK [0x02630000, 0x02630fff] PGTABLE [ 0.000000] BRK [0x02631000, 0x02631fff] PGTABLE [ 0.000000] BRK [0x02632000, 0x02632fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0fcbd000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 000040 [ 0.000000] ACPI: SSDT 0ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, primary cpu clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 600 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 23ca580 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64796 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-c0-03261337/linux-devel:devel-hourly-2014032612/.vmlinuz-df16ea4de143a63d0f598003bde671cc277390e0-20140326141245-5-athens branch=linux-devel/devel-hourly-2014032612 BOOT_IMAGE=/kernel/i386-randconfig-c0-03261337/df16ea4de143a63d0f598003bde671cc277390e0/vmlinuz-3.14.0-rc8-wl-03045-gdf16ea4 drbd.minor_count=8 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 229704K/261744K available (14930K kernel code, 1030K rwdata, 5248K rodata, 620K init, 780K bss, 32040K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xffbfe000 ( 756 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xc24b8000 - 0xc2553000 ( 620 kB) [ 0.000000] .data : 0xc1e94ee6 - 0xc24b7a00 (6282 kB) [ 0.000000] .text : 0xc1000000 - 0xc1e94ee6 (14931 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=cf006000 soft=cf008000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2892.998 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5785.99 BogoMIPS (lpj=2892998) [ 0.003688] pid_max: default: 32768 minimum: 301 [ 0.004023] ACPI: Core revision 20131218 [ 0.006437] ACPI: All ACPI Tables successfully acquired [ 0.008016] Mount-cache hash table entries: 512 [ 0.009426] mce: CPU supports 10 MCE banks [ 0.010075] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010075] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.010075] tlb_flushall_shift: 6 [ 0.011011] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.019691] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.023713] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024015] Getting VERSION: 50014 [ 0.025017] Getting VERSION: 50014 [ 0.026016] Getting ID: 0 [ 0.027028] Getting ID: f000000 [ 0.028019] Getting LVT0: 8700 [ 0.029012] Getting LVT1: 8400 [ 0.030112] enabled ExtINT on CPU#0 [ 0.033550] ENABLING IO-APIC IRQs [ 0.034014] init IO_APIC IRQs [ 0.035007] apic 0 pin 0 not connected [ 0.036014] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.037040] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.038037] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.039034] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.040041] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.041039] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.042038] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.043032] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.045009] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.046031] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.047034] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.048032] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.049039] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.051032] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.052035] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.053037] apic 0 pin 16 not connected [ 0.054005] apic 0 pin 17 not connected [ 0.055004] apic 0 pin 18 not connected [ 0.056005] apic 0 pin 19 not connected [ 0.057005] apic 0 pin 20 not connected [ 0.058005] apic 0 pin 21 not connected [ 0.059004] apic 0 pin 22 not connected [ 0.060006] apic 0 pin 23 not connected [ 0.061159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062005] Using local APIC timer interrupts. [ 0.062005] calibrating APIC timer ... [ 0.064000] ... lapic delta = 6312217 [ 0.064000] ... PM-Timer delta = 361549 [ 0.064000] APIC calibration not consistent with PM-Timer: 101ms instead of 100ms [ 0.064000] APIC delta adjusted to PM-Timer: 6249452 (6312217) [ 0.064000] TSC delta adjusted to PM-Timer: 289300745 (292206248) [ 0.064000] ..... delta 6249452 [ 0.064000] ..... mult: 268411919 [ 0.064000] ..... calibration result: 999912 [ 0.064000] ..... CPU clock speed is 2893.0007 MHz. [ 0.064000] ..... host bus clock speed is 999.0912 MHz. [ 0.064492] devtmpfs: initialized [ 0.068042] xor: measuring software checksum speed [ 0.079022] pIII_sse : 92.000 MB/sec [ 0.090031] prefetch64-sse: 96.000 MB/sec [ 0.091007] xor: using function: prefetch64-sse (96.000 MB/sec) [ 0.092163] regulator-dummy: no parameters [ 0.094113] NET: Registered protocol family 16 [ 0.096782] cpuidle: using governor menu [ 0.098945] ACPI: bus type PCI registered [ 0.100044] dca service started, version 1.12.1 [ 0.101059] PCI: Using configuration type 1 for base access [ 0.127259] bio: create slab at 0 [ 0.128742] ACPI: Added _OSI(Module Device) [ 0.129007] ACPI: Added _OSI(Processor Device) [ 0.130014] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.131005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.135613] ACPI: Interpreter enabled [ 0.136014] ACPI: (supports S0 S5) [ 0.137004] ACPI: Using IOAPIC for interrupt routing [ 0.138060] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.145041] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.146019] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.147027] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.149106] PCI host bridge to bus 0000:00 [ 0.150014] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.151013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.152014] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.153011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.154014] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.155070] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.157506] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.158717] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.163449] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.166360] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.167486] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.168035] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.169403] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.172069] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.175066] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.187074] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.188765] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.191010] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.194016] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.204012] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.205387] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.208010] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.211011] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.221579] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.224010] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.227008] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.237074] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.240010] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.243012] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.253185] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.255774] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.257625] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.264377] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.266599] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.268606] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.278228] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.281009] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.283883] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.293477] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.295008] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.301523] pci_bus 0000:00: on NUMA node 0 [ 0.303378] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.305874] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.308189] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.310222] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.312812] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.315000] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.316821] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.317020] vgaarb: loaded [ 0.318005] vgaarb: bridge control possible 0000:00:02.0 [ 0.320708] SCSI subsystem initialized [ 0.321317] Linux video capture interface: v2.00 [ 0.322099] pps_core: LinuxPPS API ver. 1 registered [ 0.323020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.324049] PTP clock support registered [ 0.325434] Advanced Linux Sound Architecture Driver Initialized. [ 0.326013] PCI: Using ACPI for IRQ routing [ 0.327015] PCI: pci_cache_line_size set to 64 bytes [ 0.329100] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.330014] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.331417] Bluetooth: Core ver 2.19 [ 0.332061] NET: Registered protocol family 31 [ 0.333010] Bluetooth: HCI device and connection manager initialized [ 0.334034] Bluetooth: HCI socket layer initialized [ 0.335018] Bluetooth: L2CAP socket layer initialized [ 0.336098] Bluetooth: SCO socket layer initialized [ 0.339376] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.340160] Switched to clocksource kvm-clock [ 0.342226] FS-Cache: Loaded [ 0.343797] pnp: PnP ACPI init [ 0.345427] ACPI: bus type PNP registered [ 0.347428] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.351182] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.353635] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.356236] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.358203] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.361460] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.364370] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.372105] pnp 00:03: [dma 2] [ 0.373764] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.376078] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.379206] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.382127] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.385944] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.389102] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.391689] pnp: PnP ACPI: found 7 devices [ 0.392979] ACPI: bus type PNP unregistered [ 0.394546] PnPBIOS: Disabled [ 0.436107] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.437797] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.439471] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.441335] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.443309] NET: Registered protocol family 2 [ 0.444980] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.447062] TCP bind hash table entries: 2048 (order: 3, 40960 bytes) [ 0.451599] TCP: Hash tables configured (established 2048 bind 2048) [ 0.453586] TCP: reno registered [ 0.454696] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.456521] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.458545] NET: Registered protocol family 1 [ 0.460179] RPC: Registered named UNIX socket transport module. [ 0.461947] RPC: Registered udp transport module. [ 0.463417] RPC: Registered tcp transport module. [ 0.464875] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.466824] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.468608] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.470350] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.472179] pci 0000:00:02.0: Boot video device [ 0.473647] PCI: CLS 0 bytes, default 64 [ 0.475469] Unpacking initramfs... [ 0.686338] debug: unmapping init [mem 0xcfcbd000-0xcffeffff] [ 0.691103] cryptomgr_test (29) used greatest stack depth: 7124 bytes left [ 0.694432] cryptomgr_test (30) used greatest stack depth: 7096 bytes left [ 0.697525] NatSemi SCx200 Driver [ 0.700041] futex hash table entries: 256 (order: 0, 7168 bytes) [ 0.702850] Initialise system trusted keyring [ 0.711904] VFS: Disk quotas dquot_6.5.2 [ 0.714069] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.717598] DLM installed [ 0.721030] FS-Cache: Netfs 'nfs' registered for caching [ 0.723746] NFS: Registering the id_resolver key type [ 0.726016] Key type id_resolver registered [ 0.728011] Key type id_legacy registered [ 0.729901] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.732809] NFS: objlayout_init: Registered OSD pNFS Layout Driver [ 0.735647] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.739099] NTFS driver 2.1.30 [Flags: R/O]. [ 0.741694] SGI XFS with security attributes, realtime, large block/inode numbers, debug enabled [ 0.747121] ocfs2: Registered cluster interface o2cb [ 0.749520] ocfs2: Registered cluster interface user [ 0.752146] OCFS2 User DLM kernel interface loaded [ 0.756072] GFS2 installed [ 0.757673] FS-Cache: Netfs 'ceph' registered for caching [ 0.760171] ceph: loaded (mds proto 32) [ 0.762058] msgmni has been set to 448 [ 0.764990] cryptomgr_test (48) used greatest stack depth: 6720 bytes left [ 0.768589] cryptomgr_test (49) used greatest stack depth: 6688 bytes left [ 0.773236] cryptomgr_test (54) used greatest stack depth: 6456 bytes left [ 0.776751] cryptomgr_test (55) used greatest stack depth: 6384 bytes left [ 0.787044] alg: No test for crc32 (crc32-table) [ 0.789788] alg: No test for lz4 (lz4-generic) [ 0.792185] alg: No test for lz4hc (lz4hc-generic) [ 0.794703] alg: No test for stdrng (krng) [ 0.802224] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.805444] NET: Registered protocol family 38 [ 0.807723] async_tx: api initialized (async) [ 0.809987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.813757] io scheduler noop registered [ 0.815785] io scheduler deadline registered [ 0.818021] io scheduler cfq registered (default) [ 0.822710] test_string_helpers: Running tests... [ 0.831378] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1 [ 0.833798] crc32: self tests passed, processed 225944 bytes in 3159168 nsec [ 0.840306] crc32c: CRC_LE_BITS = 1 [ 0.841479] crc32c: self tests passed, processed 225944 bytes in 1583223 nsec [ 1.149874] crc32_combine: 8373 self tests passed [ 1.512390] crc32c_combine: 8373 self tests passed [ 1.514377] xz_dec_test: module loaded [ 1.515600] xz_dec_test: Create a device node with 'mknod xz_dec_test c 249 0' and write .xz files to it. [ 1.519802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.521581] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.523620] ipmi message handler version 39.2 [ 1.525272] ipmi device interface [ 1.526441] IPMI System Interface driver. [ 1.527767] ipmi_si: Adding default-specified kcs state machine [ 1.529622] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 1.532698] ipmi_si: Interface detection failed [ 1.534129] ipmi_si: Adding default-specified smic state machine [ 1.536031] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 1.539060] ipmi_si: Interface detection failed [ 1.540476] ipmi_si: Adding default-specified bt state machine [ 1.542330] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.545370] ipmi_si: Interface detection failed [ 1.546855] ipmi_si: Unable to find any System Interface(s) [ 1.548554] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 1.551051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.553388] ACPI: Power Button [PWRF] [ 1.554856] isapnp: Scanning for PnP cards... [ 1.780214] tsc: Refined TSC clocksource calibration: 2892.946 MHz [ 1.921863] isapnp: No Plug & Play device found [ 1.924897] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 1.928089] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.930680] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 1.936741] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 1.939201] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 1.945764] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 1.951597] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.008252] HDLC line discipline maxframe=4096 [ 2.010429] N_HDLC line discipline registered. [ 2.012638] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 2.015266] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.043857] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.048603] STMicroelectronics ASC driver initialized [ 2.051519] Cyclades driver 2.6 [ 2.073548] MOXA Smartio/Industio family driver version 2.0.5 [ 2.076413] Initializing Nozomi driver 2.1d [ 2.078606] RocketPort device driver module, version 2.09, 12-June-2003 [ 2.081641] No rocketport ports found; unloading driver [ 2.084173] SyncLink GT [ 2.085565] SyncLink GT, tty major#242 [ 2.087534] SyncLink GT no devices found [ 2.089705] DoubleTalk PC - not found [ 2.091602] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 2.094836] ac.o: No PCI boards found. [ 2.096765] ac.o: For an ISA board you must supply memory and irq parameters. [ 2.100044] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 2.102913] toshiba: not a supported Toshiba laptop [ 2.105314] scx200_gpio: no SCx200 gpio present [ 2.107679] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 2.110891] platform pc8736x_gpio.0: no device found [ 2.113022] nsc_gpio initializing [ 2.114633] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 2.117003] smapi::smapi_init, ERROR invalid usSmapiID [ 2.119378] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 2.123673] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 2.127161] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 2.129923] Linux agpgart interface v0.103 [ 2.132201] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.136136] Hangcheck: Using getrawmonotonic(). [ 2.139286] parport_pc 00:04: reported by Plug and Play ACPI [ 2.142207] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 2.230148] dummy-irq: no IRQ given. Use irq=N [ 2.232480] Phantom Linux Driver, version n0.9.8, init OK [ 2.235227] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 2.238812] c2port c2port0: C2 port uc added [ 2.240836] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 2.245140] Uniform Multi-Platform E-IDE driver [ 2.249561] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 2.254204] ide-gd driver 1.18 [ 2.255883] ide-cd driver 5.00 [ 2.258081] Loading iSCSI transport class v2.0-870. [ 2.261065] fnic: Cisco FCoE HBA Driver, ver 1.5.0.45 [ 2.263588] fnic: Successfully Initialized Trace Buffer [ 2.266387] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013) [ 2.270401] iscsi: registered transport (tcp) [ 2.273088] Adaptec aacraid driver 1.2-0[30200]-ms [ 2.275370] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 2.279580] scsi: Detection failed (no card) [ 2.286048] sym53c416.c: Version 1.0.0-ac [ 2.288035] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options [ 2.292246] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.12-k. [ 2.296589] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 [ 2.299434] csiostor: Chelsio FCoE driver 1.0.0 [ 2.323193] Failed initialization of WD-7000 SCSI card! [ 2.450883] mpt2sas version 16.100.00.00 loaded [ 2.453271] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 2.456678] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 2.460251] ppa: Version 2.07 (for Linux 2.4.x) [ 2.464706] imm: Version 2.05 (for Linux 2.4.0) [ 2.467439] nsp32: loading... [ 2.468740] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 2.470430] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. [ 2.472860] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. [ 2.474866] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) [ 2.476678] iscsi: registered transport (cxgb3i) [ 2.478119] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.6.2 (Jun 06, 2013) [ 2.480210] iscsi: registered transport (bnx2i) [ 2.481741] iscsi: registered transport (be2iscsi) [ 2.483247] In beiscsi_module_init, tt=c24281e0 [ 2.484953] VMware PVSCSI driver - version 1.0.2.0-k [ 2.486563] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 2.488547] SCSI Media Changer driver v0.25 [ 2.489953] osd: LOADED open-osd 0.2.1 [ 2.503942] scsi_debug: host protection [ 2.505994] scsi0 : scsi_debug, version 1.82 [20100324], dev_size_mb=8, opts=0x0 [ 2.510215] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 [ 2.514752] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.517381] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.38 MB/8.00 MiB) [ 2.522003] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 2.525167] sd 0:0:0:0: [sda] Write Protect is off [ 2.527552] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08 [ 2.530647] SSFDC read-only Flash Translation layer [ 2.533107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.537441] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.540520] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 2.543313] ------------[ cut here ]------------ [ 2.544235] kernel BUG at include/linux/mtd/map.h:148! [ 2.544235] invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC [ 2.544235] CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.0-rc8-wl-03045-gdf16ea4 #6 [ 2.544235] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 2.544235] task: cf048000 ti: cf036000 task.ti: cf036000 [ 2.544235] EIP: 0060:[] EFLAGS: 00010296 CPU: 0 [ 2.544235] EIP is at mtd_do_chip_probe+0x15/0x17 [ 2.544235] EAX: 00000000 EBX: c242bf28 ECX: 00000000 EDX: cf037e88 [ 2.544235] ESI: c2275f71 EDI: cf037ec4 EBP: cf037ec8 ESP: cf037e88 [ 2.544235] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 2.544235] CR0: 8005003b CR2: 00000000 CR3: 02556000 CR4: 000006f0 [ 2.544235] Stack: [ 2.544235] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.544235] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c242c500 [ 2.544235] cf037ed0 c1794d3e cf037ee4 c1794cf5 00000000 c24f0561 00000564 cf037f04 [ 2.544235] Call Trace: [ 2.544235] [] cfi_probe+0xd/0xf [ 2.544235] [] do_map_probe+0x50/0x66 [ 2.544235] [] ? init_ck804xrom+0x37d/0x37d [ 2.544235] [] init_sbc_gxx+0xe8/0x123 [ 2.544235] [] do_one_initcall+0x80/0x107 [ 2.544235] [] ? strlen+0xf/0x19 [ 2.544235] [] ? repair_env_string+0xa/0x51 [ 2.544235] [] ? parse_args+0x1bd/0x308 [ 2.544235] [] ? __wake_up+0x3a/0x42 [ 2.544235] [] kernel_init_freeable+0xf5/0x18c [ 2.544235] [] ? do_early_param+0x78/0x78 [ 2.544235] [] kernel_init+0xb/0xc2 [ 2.544235] [] ? schedule_tail+0x12/0x3a [ 2.544235] [] ret_from_kernel_thread+0x1b/0x30 [ 2.544235] [] ? rest_init+0x6e/0x6e [ 2.544235] Code: e9 1e fd ff ff c7 04 24 44 8e 30 c2 e8 df df 6e 00 e9 28 fb ff ff 55 31 c0 89 e5 b9 0f 00 00 00 8d 55 c0 57 89 d7 83 ec 3c f3 ab <0f> 0b 55 ba 90 c1 42 c2 89 e5 e8 dc ff ff ff 5d c3 55 89 e5 57 [ 2.544235] EIP: [] mtd_do_chip_probe+0x15/0x17 SS:ESP 0068:cf037e88 [ 2.624248] ---[ end trace 5ac6af17914e65e8 ]--- [ 2.626050] swapper (1) used greatest stack depth: 5768 bytes left [ 2.628043] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.628043] [ 2.628904] Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xd07fdfff) [ 2.628904] Rebooting in 10 seconds.. Elapsed time: 10 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-c0-03261337/df16ea4de143a63d0f598003bde671cc277390e0/vmlinuz-3.14.0-rc8-wl-03045-gdf16ea4 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-c0-03261337/linux-devel:devel-hourly-2014032612/.vmlinuz-df16ea4de143a63d0f598003bde671cc277390e0-20140326141245-5-athens branch=linux-devel/devel-hourly-2014032612 BOOT_IMAGE=/kernel/i386-randconfig-c0-03261337/df16ea4de143a63d0f598003bde671cc277390e0/vmlinuz-3.14.0-rc8-wl-03045-gdf16ea4 drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::30931-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/LABEL=KVM/disk0-yocto-athens-23,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk1-yocto-athens-23,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk2-yocto-athens-23,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk3-yocto-athens-23,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk4-yocto-athens-23,media=disk,if=virtio -drive file=/fs/LABEL=KVM/disk5-yocto-athens-23,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-yocto-athens-23 -serial file:/dev/shm/kboot/serial-yocto-athens-23 -daemonize -display none -monitor null