[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140328100158.042a3d68@ipc1.ka-ro>
Date: Fri, 28 Mar 2014 10:01:58 +0100
From: Lothar Waßmann <LW@...O-electronics.de>
To: Huang Shijie <b32955@...escale.com>
Cc: Fabio Estevam <fabio.estevam@...escale.com>,
Mark Rutland <mark.rutland@....com>,
Brian Norris <computersforpeace@...il.com>,
Russell King <linux@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>, Arnd Bergmann <arnd@...db.de>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
<linux-mtd@...ts.infradead.org>,
Shawn Guo <shawn.guo@...escale.com>,
Rob Landley <rob@...dley.net>,
Kumar Gala <galak@...eaurora.org>,
Shawn Guo <shawn.guo@...aro.org>,
David Woodhouse <dwmw2@...radead.org>,
Sascha Hauer <kernel@...gutronix.de>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCHv2 1/1] mtd: gpmi: make blockmark swapping optional
Hi,
Huang Shijie wrote:
> 于 2014年03月28日 16:16, Lothar Waßmann 写道:
> > Still there is no need for the Linux NAND driver to be able to read or
> > write partitions in a format that the Boot ROM can understand. Thus it
> If you do not use the NAND boot, there really no need to do so.
>
There is no need for the ROM code to access any other partition than
the bootloader itself. Thus Linux can perfectly well be booted from
NAND without any byte swapping.
> Since you need the NAND boot, we should enable the swapping for imx28.
>
Why? There is no need for Linux to do any swapping when not accessing
the bootloader partition.
> > is perfectly legal to allow disregarding the BB marks and solely rely on
> > a flash based BBT.
> >
> The BB mark is in the page 0 of a NAND block. But the swapping can occur
> in _each_ page of
> a NAND block, _NOT_ only the page 0.
>
> I think you are confusing at these two things.
>
No, I'm not confusing anything. The swapping in any other page than
page 0 is completely useless. Thus, when there is no need to recognize
the BB markers, there in no need to do any swapping too.
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@...o-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists