[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1396020545-15727-6-git-send-email-j.anaszewski@samsung.com>
Date: Fri, 28 Mar 2014 16:29:02 +0100
From: Jacek Anaszewski <j.anaszewski@...sung.com>
To: linux-media@...r.kernel.org, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: s.nawrocki@...sung.com, a.hajda@...sung.com,
kyungmin.park@...sung.com,
Jacek Anaszewski <j.anaszewski@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: [PATCH/RFC v2 5/8] DT: Add documentation for the mfd Maxim max77693
flash cell
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Cc: Kumar Gala <galak@...eaurora.org>
---
Documentation/devicetree/bindings/mfd/max77693.txt | 47 ++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index 11921cc..7a9a4d5 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -27,6 +27,43 @@ Optional properties:
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+Optional node:
+- led-flash : the LED submodule device node
+
+Required properties of "led-flash" node:
+- compatible : must be "maxim,max77693-flash"
+
+Optional properties of "led-flash" node:
+- maxim,iout : Array of four maximum intensities in microampheres of the current
+ in order: flash1, flash2, torch1, torch2.
+ Range:
+ flash - 15625 - 1000000,
+ torch - 15625 - 250000.
+- maxim,trigger : Array of flags indicating which trigger can activate given led
+ in order: flash1, flash2, torch1, torch2.
+ Possible flag values (can be combined):
+ 1 - FLASH pin of the chip,
+ 2 - TORCH pin of the chip,
+ 4 - software via I2C command.
+- maxim,trigger-type : Array of trigger types in order: flash, torch.
+ Possible trigger types:
+ 0 - Rising edge of the signal triggers the flash/torch,
+ 1 - Signal level controls duration of the flash/torch.
+- maxim,timeout : Array of timeouts in microseconds after which leds are
+ turned off in order: flash, torch.
+ Range:
+ flash: 62500 - 1000000,
+ torch: 0 (no timeout) - 15728000.
+- maxim,boost-mode : Array of the flash boost modes in order: flash1, flash2.
+ Possible values:
+ 0 - no boost,
+ 1 - adaptive mode,
+ 2 - fixed mode.
+- maxim,boost-vout : Output voltage of the boost module in millivolts.
+- maxim,vsys-min : Low input voltage level in millivolts. Flash is not fired
+ if chip estimates that system voltage could drop below this level due
+ to flash power consumption.
+
Example:
max77693@66 {
compatible = "maxim,max77693";
@@ -52,4 +89,14 @@ Example:
regulator-boot-on;
};
};
+ led_flash: led-flash {
+ compatible = "maxim,max77693-flash";
+ maxim,iout = <625000 625000 250000 250000>;
+ maxim,trigger = <5 5 6 6>;
+ maxim,trigger-type = <0 1>;
+ maxim,timeout = <500000 0>;
+ maxim,boost-mode = <1 1>;
+ maxim,boost-vout = <5000>;
+ maxim,vsys-min = <2400>;
+ };
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists