| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Apr 2014 15:31:54 +0200 From: Rostislav Lisovy <lisovy@...il.com> To: Johannes Berg <johannes@...solutions.net>, "John W. Linville" <linville@...driver.com>, linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org Cc: Michal Sojka <sojkam1@....cvut.cz>, s.sander@...dsys.de, jan-niklas.meier@...kswagen.de, Rostislav Lisovy <rostislav.lisovy@....cvut.cz> Subject: [PATCH 3/4] cfg80211: Use 5MHz bandwidth by default when checking usable channels Current code checks if the 20MHz bandwidth is allowed for particular channel -- if it is not, the channel is disabled. Since we need to use 5/10 MHz channels, this code is modified in the way that the default bandwidth to check is 5MHz. If the maximum bandwidth allowed by the channel is smaller than 5MHz, the channel is disabled. Otherwise the channel is used and the flags are set according to the bandwidth allowed by the channel. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@....cvut.cz> --- net/wireless/reg.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f054137..5f0dd26 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -805,7 +805,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5)); if (band_rule_found && bw_fits) return rr; @@ -888,10 +888,10 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, } #endif -/* - * Note that right now we assume the desired channel bandwidth - * is always 20 MHz for each individual channel (HT40 uses 20 MHz - * per channel, the primary and the extension channel). +/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency + * @chan->center_freq fits there. + * If there is no such reg_rule, disable the channel, otherwise set the + * flags corresponding to the bandwidths allowed in the particular reg_rule */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -944,8 +944,12 @@ static void handle_channel(struct wiphy *wiphy, power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(10)) + bw_flags = IEEE80211_CHAN_NO_10MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(20)) + bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags = IEEE80211_CHAN_NO_HT40; + bw_flags |= IEEE80211_CHAN_NO_HT40; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) @@ -1351,8 +1355,12 @@ static void handle_channel_custom(struct wiphy *wiphy, power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(10)) + bw_flags = IEEE80211_CHAN_NO_10MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(20)) + bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags = IEEE80211_CHAN_NO_HT40; + bw_flags |= IEEE80211_CHAN_NO_HT40; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists