| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20140402125557.2d2f48716b8ff79f7042f223@canb.auug.org.au>
Date: Wed, 2 Apr 2014 12:55:57 +1100
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Greg KH <greg@...ah.com>, Olof Johansson <olof@...om.net>,
Arnd Bergmann <arnd@...db.de>,
<linux-arm-kernel@...ts.infradead.org>
Cc: linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Russell King <rmk+kernel@....linux.org.uk>,
Steffen Trumtrar <s.trumtrar@...gutronix.de>,
Shawn Guo <shawn.guo@...aro.org>
Subject: Re: linux-next: manual merge of the staging tree with the arm-soc
tree
Hi all,
On Tue, 25 Feb 2014 17:09:44 +1100 Stephen Rothwell <sfr@...b.auug.org.au> wrote:
>
> Today's linux-next merge of the staging tree got a conflict in
> arch/arm/boot/dts/imx53-qsb.dts between commit d5eb195f26fa ("ARM: dts:
> i.MX53: move common QSB nodes to new file") from the arm-soc tree and
> commit 17b5001b5143 ("imx-drm: convert to componentised device support")
> from the staging tree.
These merge fixups are now required when the arm-soc tree is merged with
Linus' tree.
> I fixed it up (see at bottom) and can carry the fix as necessary (no
> action is required). I also added the following fix up patch:
>
> From: Stephen Rothwell <sfr@...b.auug.org.au>
> Date: Tue, 25 Feb 2014 17:07:01 +1100
> Subject: [PATCH] ARM: dts: i.MX53: merge fix patch
>
> Signed-off-by: Stephen Rothwell <sfr@...b.auug.org.au>
> ---
> arch/arm/boot/dts/imx53-qsb-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index 2dca98b79f48..5dd37c7c38b8 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -17,7 +17,7 @@
> reg = <0x70000000 0x40000000>;
> };
>
> - display@di0 {
> + display0: display@di0 {
> compatible = "fsl,imx-parallel-display";
> crtcs = <&ipu 0>;
> interface-pix-fmt = "rgb565";
> --
> 1.9.0
>
> --
> Cheers,
> Stephen Rothwell sfr@...b.auug.org.au
>
> diff --cc arch/arm/boot/dts/imx53-qsb.dts
> index dec4b073ceb1,3cb4f7791a91..000000000000
> --- a/arch/arm/boot/dts/imx53-qsb.dts
> +++ b/arch/arm/boot/dts/imx53-qsb.dts
> @@@ -16,6 -16,182 +16,11 @@@
> / {
> model = "Freescale i.MX53 Quick Start Board";
> compatible = "fsl,imx53-qsb", "fsl,imx53";
> -
> - memory {
> - reg = <0x70000000 0x40000000>;
> - };
> -
> - display0: display@di0 {
> - compatible = "fsl,imx-parallel-display";
> - crtcs = <&ipu 0>;
> - interface-pix-fmt = "rgb565";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ipu_disp0_1>;
> - status = "disabled";
> - display-timings {
> - claawvga {
> - native-mode;
> - clock-frequency = <27000000>;
> - hactive = <800>;
> - vactive = <480>;
> - hback-porch = <40>;
> - hfront-porch = <60>;
> - vback-porch = <10>;
> - vfront-porch = <10>;
> - hsync-len = <20>;
> - vsync-len = <10>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> - };
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - power {
> - label = "Power Button";
> - gpios = <&gpio1 8 0>;
> - linux,code = <116>; /* KEY_POWER */
> - };
> -
> - volume-up {
> - label = "Volume Up";
> - gpios = <&gpio2 14 0>;
> - linux,code = <115>; /* KEY_VOLUMEUP */
> - gpio-key,wakeup;
> - };
> -
> - volume-down {
> - label = "Volume Down";
> - gpios = <&gpio2 15 0>;
> - linux,code = <114>; /* KEY_VOLUMEDOWN */
> - gpio-key,wakeup;
> - };
> - };
> -
> + imx-drm {
> + compatible = "fsl,imx-drm";
> + crtcs = <&ipu 0>;
> + connectors = <&display0>;
> + };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&led_pin_gpio7_7>;
> -
> - user {
> - label = "Heartbeat";
> - gpios = <&gpio7 7 0>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> -
> - reg_3p2v: 3p2v {
> - compatible = "regulator-fixed";
> - regulator-name = "3P2V";
> - regulator-min-microvolt = <3200000>;
> - regulator-max-microvolt = <3200000>;
> - regulator-always-on;
> - };
> -
> - reg_usb_vbus: usb_vbus {
> - compatible = "regulator-fixed";
> - regulator-name = "usb_vbus";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - gpio = <&gpio7 8 0>;
> - enable-active-high;
> - };
> - };
> -
> - sound {
> - compatible = "fsl,imx53-qsb-sgtl5000",
> - "fsl,imx-audio-sgtl5000";
> - model = "imx53-qsb-sgtl5000";
> - ssi-controller = <&ssi2>;
> - audio-codec = <&sgtl5000>;
> - audio-routing =
> - "MIC_IN", "Mic Jack",
> - "Mic Jack", "Mic Bias",
> - "Headphone Jack", "HP_OUT";
> - mux-int-port = <2>;
> - mux-ext-port = <5>;
> - };
> -};
> -
> -&esdhc1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc1_1>;
> - status = "okay";
> -};
> -
> -&ssi2 {
> - fsl,mode = "i2s-slave";
> - status = "okay";
> -};
> -
> -&esdhc3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_esdhc3_1>;
> - cd-gpios = <&gpio3 11 0>;
> - wp-gpios = <&gpio3 12 0>;
> - bus-width = <8>;
> - status = "okay";
> -};
> -
> -&iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> - hog {
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
> - MX53_PAD_GPIO_8__GPIO1_8 0x80000000
> - MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
> - MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
> - MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
> - MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
> - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
> - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
> - MX53_PAD_GPIO_16__GPIO7_11 0x80000000
> - >;
> - };
> -
> - led_pin_gpio7_7: led_gpio7_7@0 {
> - fsl,pins = <
> - MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
> - >;
> - };
> - };
> -
> -};
> -
> -&uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_uart1_1>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_i2c2_1>;
> - status = "okay";
> -
> - sgtl5000: codec@0a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - VDDA-supply = <®_3p2v>;
> - VDDIO-supply = <®_3p2v>;
> - clocks = <&clks 150>;
> - };
> };
>
> &i2c1 {
--
Cheers,
Stephen Rothwell sfr@...b.auug.org.au
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists