| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1396547967-19260-3-git-send-email-soren.brinkmann@xilinx.com>
Date: Thu, 3 Apr 2014 10:59:27 -0700
From: Soren Brinkmann <soren.brinkmann@...inx.com>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Rob Landley <rob@...dley.net>,
Russell King <linux@....linux.org.uk>,
Wolfram Sang <wsa@...-dreams.de>,
Grant Likely <grant.likely@...aro.org>,
Michal Simek <michal.simek@...inx.com>
Cc: Mike Looijmans <mike.looijmans@...ic.nl>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Harini Katakam <harinik@...inx.com>, linux-doc@...r.kernel.org,
devicetree@...r.kernel.org, linux-i2c@...r.kernel.org,
Sören Brinkmann <soren.brinkmann@...inx.com>
Subject: [PATCH v4 3/3] ARM: zynq: dt: Add I2C nodes to Zynq device tree
Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
Tested-by: Michal Simek <michal.simek@...inx.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- replace 'pmbus' with 'ti' in compatibility strings of UCD devices
Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
---
arch/arm/boot/dts/zynq-7000.dtsi | 22 ++++++++++++
arch/arm/boot/dts/zynq-zc702.dts | 76 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-zc706.dts | 68 +++++++++++++++++++++++++++++++++++
3 files changed, 166 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 789d0bacc110..e4f0820527b1 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -54,6 +54,28 @@
interrupt-parent = <&intc>;
ranges;
+ i2c0: zynq-i2c@...04000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 38>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 25 4>;
+ reg = <0xE0004000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: zynq-i2c@...05000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 39>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 48 4>;
+ reg = <0xE0005000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
intc: interrupt-controller@...01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index c913f77a21eb..5e09cee33d42 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -34,6 +34,82 @@
phy-mode = "rgmii";
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ hwmon@52 {
+ compatible = "ti,ucd9248";
+ reg = <52>;
+ };
+ hwmon@53 {
+ compatible = "ti,ucd9248";
+ reg = <53>;
+ };
+ hwmon@54 {
+ compatible = "ti,ucd9248";
+ reg = <54>;
+ };
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 88f62c50382e..4cc9913078cd 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -35,6 +35,74 @@
phy-mode = "rgmii";
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ ucd90120@65 {
+ compatible = "ti,ucd90120";
+ reg = <0x65>;
+ };
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
};
--
1.9.1.1.gbb9f595
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists