| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Apr 2014 15:19:39 +0530
From: sourav <sourav.poddar@...com>
To: Yuan Yao <yao.yuan@...escale.com>
CC: <wsa@...-dreams.de>, <marex@...x.de>, <mark.rutland@....com>,
<shawn.guo@...aro.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-i2c@...r.kernel.org>
Subject: Re: [PATCH v4 1/2] i2c: add DMA support for freescale i2c driver
Hi,
On Friday 04 April 2014 08:11 AM, Yuan Yao wrote:
> Add dma support for i2c. This function depend on DMA driver.
> You can turn on it by write both the dmas and dma-name properties in dts node.
>
> Signed-off-by: Yuan Yao<yao.yuan@...escale.com>
> ---
> drivers/i2c/busses/i2c-imx.c | 372 +++++++++++++++++++++++++++++++++++++------
> 1 file changed, 319 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index db895fb..3d63b35 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -37,22 +37,27 @@
> /** Includes *******************************************************************
> *******************************************************************************/
>
> -#include<linux/init.h>
> -#include<linux/kernel.h>
> -#include<linux/module.h>
> +#include<linux/clk.h>
> +#include<linux/completion.h>
> +#include<linux/delay.h>
> +#include<linux/dma-mapping.h>
> +#include<linux/dmaengine.h>
> +#include<linux/dmapool.h>
> #include<linux/errno.h>
> #include<linux/err.h>
> #include<linux/interrupt.h>
> -#include<linux/delay.h>
> #include<linux/i2c.h>
> +#include<linux/init.h>
> #include<linux/io.h>
> -#include<linux/sched.h>
> -#include<linux/platform_device.h>
> -#include<linux/clk.h>
> -#include<linux/slab.h>
> +#include<linux/kernel.h>
> +#include<linux/module.h>
> #include<linux/of.h>
> #include<linux/of_device.h>
> +#include<linux/of_dma.h>
> #include<linux/platform_data/i2c-imx.h>
> +#include<linux/platform_device.h>
> +#include<linux/sched.h>
> +#include<linux/slab.h>
>
> /** Defines ********************************************************************
> *******************************************************************************/
> @@ -63,6 +68,10 @@
> /* Default value */
> #define IMX_I2C_BIT_RATE 100000 /* 100kHz */
>
> +/* enable DMA if transfer byte size is bigger than this threshold */
> +#define IMX_I2C_DMA_THRESHOLD 16
> +#define IMX_I2C_DMA_TIMEOUT 1000
> +
> /* IMX I2C registers:
> * the I2C register offset is different between SoCs,
> * to provid support for all these chips, split the
> @@ -88,6 +97,7 @@
> #define I2SR_IBB 0x20
> #define I2SR_IAAS 0x40
> #define I2SR_ICF 0x80
> +#define I2CR_DMAEN 0x02
> #define I2CR_RSTA 0x04
> #define I2CR_TXAK 0x08
> #define I2CR_MTX 0x10
> @@ -174,6 +184,17 @@ struct imx_i2c_hwdata {
> unsigned i2cr_ien_opcode;
> };
>
> +struct imx_i2c_dma {
> + struct dma_chan *chan_tx;
> + struct dma_chan *chan_rx;
> + struct dma_chan *chan_using;
> + struct completion cmd_complete;
> + dma_addr_t dma_buf;
> + unsigned int dma_len;
> + unsigned int dma_transfer_dir;
> + unsigned int dma_data_dir;
> +};
> +
> struct imx_i2c_struct {
> struct i2c_adapter adapter;
> struct clk *clk;
> @@ -184,6 +205,8 @@ struct imx_i2c_struct {
> int stopped;
> unsigned int ifdr; /* IMX_I2C_IFDR */
> const struct imx_i2c_hwdata *hwdata;
> +
> + struct imx_i2c_dma *dma;
> };
>
> static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
> @@ -254,6 +277,132 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
> return readb(i2c_imx->base + (reg<< i2c_imx->hwdata->regshift));
> }
>
> +/* Functions for DMA support */
> +static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
> + dma_addr_t phy_addr)
> +{
> + struct imx_i2c_dma *dma;
> + struct dma_slave_config dma_sconfig;
> + struct device *dev =&i2c_imx->adapter.dev;
> + int ret;
> +
> + dma = devm_kzalloc(dev, sizeof(struct imx_i2c_dma), GFP_KERNEL);
> + if (!dma) {
> + dev_info(dev, "can't allocate DMA struct\n");
> + return -ENOMEM;
> + }
> +
> + dma->chan_tx = dma_request_slave_channel(dev, "tx");
> + return 0;
?? Looks to be some leftover?
> + if (!dma->chan_tx) {
> + dev_info(dev, "DMA tx channel request failed\n");
> + ret = -ENODEV;
> + goto fail_al;
> + }
> +
> + dma_sconfig.dst_addr = phy_addr +
> + (IMX_I2C_I2DR<< i2c_imx->hwdata->regshift);
> + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> + dma_sconfig.dst_maxburst = 1;
> + dma_sconfig.direction = DMA_MEM_TO_DEV;
> + ret = dmaengine_slave_config(dma->chan_tx,&dma_sconfig);
> + if (ret< 0) {
> + dev_info(dev, "DMA slave config failed, err = %d\n", ret);
> + goto fail_tx;
> + }
> +
> + dma->chan_rx = dma_request_slave_channel(dev, "rx");
> + if (!dma->chan_rx) {
> + dev_info(dev, "DMA rx channel request failed\n");
> + ret = -ENODEV;
> + goto fail_tx;
> + }
> +
> + dma_sconfig.src_addr = phy_addr +
> + (IMX_I2C_I2DR<< i2c_imx->hwdata->regshift);
> + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> + dma_sconfig.src_maxburst = 1;
> + dma_sconfig.direction = DMA_DEV_TO_MEM;
> + ret = dmaengine_slave_config(dma->chan_rx,&dma_sconfig);
> + if (ret< 0) {
> + dev_info(dev, "DMA slave config failed, err = %d\n", ret);
> + goto fail_rx;
> + }
> +
> + i2c_imx->dma = dma;
> +
> + init_completion(&dma->cmd_complete);
> +
> + return 0;
> +
> +fail_rx:
> + dma_release_channel(dma->chan_rx);
> +fail_tx:
> + dma_release_channel(dma->chan_tx);
> +fail_al:
> + devm_kfree(dev, dma);
> +
> + return ret;
> +}
> +
> +static void i2c_imx_dma_callback(void *arg)
> +{
> + struct imx_i2c_struct *i2c_imx = (struct imx_i2c_struct *)arg;
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> +
> + dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
> + dma->dma_len, dma->dma_data_dir);
> + complete(&dma->cmd_complete);
> +}
> +
> +static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx,
> + struct i2c_msg *msgs)
> +{
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> + struct dma_async_tx_descriptor *txdesc;
> + struct device *dev =&i2c_imx->adapter.dev;
> +
> + dma->dma_buf = dma_map_single(dma->chan_using->device->dev, msgs->buf,
> + dma->dma_len, dma->dma_data_dir);
> + if (dma_mapping_error(dma->chan_using->device->dev, dma->dma_buf)) {
> + dev_err(dev, "DMA mapping failed\n");
> + return -EINVAL;
> + }
> +
> + txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
> + dma->dma_len, dma->dma_transfer_dir,
> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> + if (!txdesc) {
> + dev_err(dev, "Not able to get desc for DMA xfer\n");
> + dma_unmap_single(dma->chan_using->device->dev, dma->dma_buf,
> + dma->dma_len, dma->dma_data_dir);
> + return -EINVAL;
> + }
> +
> + txdesc->callback = i2c_imx_dma_callback;
> + txdesc->callback_param = i2c_imx;
> + dmaengine_submit(txdesc);
> + dma_async_issue_pending(dma->chan_using);
> +
> + return 0;
> +}
> +
> +static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
> +{
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> +
> + dma->dma_buf = 0;
> + dma->dma_len = 0;
> +
> + dma_release_channel(dma->chan_tx);
> + dma->chan_tx = NULL;
> +
> + dma_release_channel(dma->chan_rx);
> + dma->chan_rx = NULL;
> +
> + dma->chan_using = NULL;
> +}
> +
> /** Functions for IMX I2C adapter driver ***************************************
> *******************************************************************************/
>
> @@ -334,6 +483,11 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
>
> temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
> imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp&= ~I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> return result;
> }
>
> @@ -427,44 +581,101 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
>
> static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
> {
> - int i, result;
> + int i, result, timeout = IMX_I2C_DMA_TIMEOUT;
> + unsigned int temp = 0;
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> + struct device *dev =&i2c_imx->adapter.dev;
>
> - dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
> + dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
> __func__, msgs->addr<< 1);
> + if (dma&& msgs->len>= IMX_I2C_DMA_THRESHOLD) {
> + reinit_completion(&i2c_imx->dma->cmd_complete);
> + dma->chan_using = dma->chan_tx;
> + dma->dma_transfer_dir = DMA_MEM_TO_DEV;
> + dma->dma_data_dir = DMA_TO_DEVICE;
> + dma->dma_len = msgs->len - 1;
> + result = i2c_imx_dma_xfer(i2c_imx, msgs);
> + if (result)
> + return result;
>
> - /* write slave address */
> - imx_i2c_write_reg(msgs->addr<< 1, i2c_imx, IMX_I2C_I2DR);
> - result = i2c_imx_trx_complete(i2c_imx);
> - if (result)
> - return result;
> - result = i2c_imx_acked(i2c_imx);
> - if (result)
> - return result;
> - dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__);
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
>
> - /* write data */
> - for (i = 0; i< msgs->len; i++) {
> - dev_dbg(&i2c_imx->adapter.dev,
> - "<%s> write byte: B%d=0x%X\n",
> - __func__, i, msgs->buf[i]);
> - imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
> + /* write slave address */
> + imx_i2c_write_reg(msgs->addr<< 1, i2c_imx, IMX_I2C_I2DR);
> + result = wait_for_completion_interruptible_timeout(
> + &i2c_imx->dma->cmd_complete,
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
> + if (result<= 0) {
> + dmaengine_terminate_all(dma->chan_using);
> + if (result)
> + return result;
> + else
> + return -ETIMEDOUT;
> + }
> +
> + /* waiting for Transfer complete. */
> + while (timeout--) {
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + if (temp& I2SR_ICF)
> + break;
> + udelay(10);
> + }
> +
> + if (!timeout)
> + return -ETIMEDOUT;
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp&= ~I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + /* write the last byte */
> + imx_i2c_write_reg(msgs->buf[msgs->len-1],
> + i2c_imx, IMX_I2C_I2DR);
> result = i2c_imx_trx_complete(i2c_imx);
> if (result)
> return result;
> +
> + result = i2c_imx_acked(i2c_imx);
> + if (result)
> + return result;
> + } else {
> + /* write slave address */
> + imx_i2c_write_reg(msgs->addr<< 1, i2c_imx, IMX_I2C_I2DR);
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> +
> result = i2c_imx_acked(i2c_imx);
> if (result)
> return result;
> +
> + dev_dbg(dev, "<%s> write data\n", __func__);
> +
> + /* write data */
> + for (i = 0; i< msgs->len; i++) {
> + dev_dbg(dev, "<%s> write byte: B%d=0x%X\n",
> + __func__, i, msgs->buf[i]);
> + imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> + result = i2c_imx_acked(i2c_imx);
> + if (result)
> + return result;
> + }
> }
> return 0;
> }
>
> static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
> {
> - int i, result;
> + int i, result, timeout = IMX_I2C_DMA_TIMEOUT;
> unsigned int temp;
> + struct imx_i2c_dma *dma = i2c_imx->dma;
> + struct device *dev =&i2c_imx->adapter.dev;
>
> - dev_dbg(&i2c_imx->adapter.dev,
> - "<%s> write slave address: addr=0x%x\n",
> + dev_dbg(dev, "<%s> write slave address: addr=0x%x\n",
> __func__, (msgs->addr<< 1) | 0x01);
>
> /* write slave address */
> @@ -476,7 +687,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
> if (result)
> return result;
>
> - dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
> + dev_dbg(dev, "<%s> setup bus\n", __func__);
>
> /* setup bus to read data */
> temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> @@ -486,35 +697,81 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
> imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
>
> - dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
> + dev_dbg(dev, "<%s> read data\n", __func__);
>
> - /* read data */
> - for (i = 0; i< msgs->len; i++) {
> - result = i2c_imx_trx_complete(i2c_imx);
> + if (dma&& msgs->len>= IMX_I2C_DMA_THRESHOLD) {
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + reinit_completion(&i2c_imx->dma->cmd_complete);
> + dma->chan_using = dma->chan_rx;
> + dma->dma_transfer_dir = DMA_DEV_TO_MEM;
> + dma->dma_data_dir = DMA_FROM_DEVICE;
> + dma->dma_len = msgs->len - 2;
> + result = i2c_imx_dma_xfer(i2c_imx, msgs);
> if (result)
> return result;
> - if (i == (msgs->len - 1)) {
> - /* It must generate STOP before read I2DR to prevent
> - controller from generating another clock cycle */
> - dev_dbg(&i2c_imx->adapter.dev,
> - "<%s> clear MSTA\n", __func__);
> - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> - temp&= ~(I2CR_MSTA | I2CR_MTX);
> - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> - i2c_imx_bus_busy(i2c_imx, 0);
> - i2c_imx->stopped = 1;
> - } else if (i == (msgs->len - 2)) {
> - dev_dbg(&i2c_imx->adapter.dev,
> - "<%s> set TXAK\n", __func__);
> - temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> - temp |= I2CR_TXAK;
> - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + result = wait_for_completion_interruptible_timeout(
> + &i2c_imx->dma->cmd_complete,
> + msecs_to_jiffies(IMX_I2C_DMA_TIMEOUT));
> + if (result<= 0) {
> + dmaengine_terminate_all(dma->chan_using);
> + if (result)
> + return result;
> + else
> + return -ETIMEDOUT;
> }
> - msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> - dev_dbg(&i2c_imx->adapter.dev,
> - "<%s> read byte: B%d=0x%X\n",
> - __func__, i, msgs->buf[i]);
> +
> + /* waiting for Transfer complete. */
> + while (timeout--) {
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
> + if (temp& I2SR_ICF)
> + break;
> + udelay(10);
> + }
> +
> + if(!timeout)
> + return -ETIMEDOUT;
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp&= ~I2CR_DMAEN;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> + } else {
> + /* read data */
> + for (i = 0; i< msgs->len - 2; i++) {
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> + msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + dev_dbg(dev, "<%s> read byte: B%d=0x%X\n",
> + __func__, i, msgs->buf[i]);
> + }
> + result = i2c_imx_trx_complete(i2c_imx);
> }
> +
> + /* read n-1 byte data */
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp |= I2CR_TXAK;
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> +
> + msgs->buf[msgs->len-2] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> + /* read n byte data */
> + result = i2c_imx_trx_complete(i2c_imx);
> + if (result)
> + return result;
> +
> + /*
> + * It must generate STOP before read I2DR to prevent
> + * controller from generating another clock cycle
> + */
> + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> + temp&= ~(I2CR_MSTA | I2CR_MTX);
> + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
> + i2c_imx_bus_busy(i2c_imx, 0);
> + i2c_imx->stopped = 1;
> + msgs->buf[msgs->len-1] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> +
> return 0;
> }
>
> @@ -601,6 +858,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> void __iomem *base;
> int irq, ret;
> u32 bitrate;
> + u32 phy_addr;
>
> dev_dbg(&pdev->dev, "<%s>\n", __func__);
>
> @@ -611,6 +869,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + phy_addr = res->start;
> base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(base))
> return PTR_ERR(base);
> @@ -696,6 +955,10 @@ static int i2c_imx_probe(struct platform_device *pdev)
> i2c_imx->adapter.name);
> dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
>
> + /* Init DMA config if support*/
> + if (i2c_imx_dma_request(i2c_imx, (dma_addr_t)phy_addr))
> + dev_warn(&pdev->dev, "can't request DMA\n");
> +
> return 0; /* Return OK */
> }
>
> @@ -707,6 +970,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
> dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
> i2c_del_adapter(&i2c_imx->adapter);
>
> + if (i2c_imx->dma)
> + i2c_imx_dma_free(i2c_imx);
> +
> /* setup chip registers to defaults */
> imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
> imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists