early console in setup code Probing EDD (edd=off to disable)... ok [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc1-00080-g336ca19 (kbuild@roam) (gcc version 4.8.2 (Debian 4.8.2-18) ) #9 Fri Apr 4 01:56:59 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x0e7fffff] [ 0.000000] Base memory trampoline at [b009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13800000-0x13bfffff] [ 0.000000] [mem 0x13800000-0x13bfffff] page 4k [ 0.000000] BRK [0x0e5a1000, 0x0e5a1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x137fffff] [ 0.000000] [mem 0x10000000-0x137fffff] page 4k [ 0.000000] BRK [0x0e5a2000, 0x0e5a2fff] PGTABLE [ 0.000000] BRK [0x0e5a3000, 0x0e5a3fff] PGTABLE [ 0.000000] BRK [0x0e5a4000, 0x0e5a4fff] PGTABLE [ 0.000000] BRK [0x0e5a5000, 0x0e5a5fff] PGTABLE [ 0.000000] BRK [0x0e5a6000, 0x0e5a6fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13c00000-0x13ffdfff] [ 0.000000] [mem 0x13c00000-0x13ffdfff] page 4k [ 0.000000] cma: CMA: reserved 16 MiB at 12800000 [ 0.000000] RAMDISK: [mem 0x13cbd000-0x13feffff] [ 0.000000] ACPI: RSDP 000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 13ffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 13ffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 13ffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 13ffff40 000040 [ 0.000000] ACPI: SSDT 13fff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 13fff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 13fff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 760 pages used for memmap [ 0.000000] Normal zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr ddf2bc0 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81020 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r1-0402/linux-devel:devel-roam-i386-201404021703:336ca196738842764df39fbd4d3f9129179b3e7d:bisect-linux5/.vmlinuz-336ca196738842764df39fbd4d3f9129179b3e7d-20140404015707-25-lkp-ib04 branch=linux-devel/devel-roam-i386-201404021703 BOOT_IMAGE=/kernel/i386-randconfig-r1-0402/336ca196738842764df39fbd4d3f9129179b3e7d/vmlinuz-3.14.0-rc1-00080-g336ca19 drbd.minor_count=8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 289836K/327280K available (4092K kernel code, 2102K rwdata, 1888K rodata, 372K init, 5260K bss, 37444K reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffcd000 - 0xfffff000 ( 200 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc47fe000 - 0xff7fe000 ( 944 MB) [ 0.000000] lowmem : 0xb0000000 - 0xc3ffe000 ( 319 MB) [ 0.000000] .init : 0xbdfe7000 - 0xbe044000 ( 372 kB) [ 0.000000] .data : 0xbdbff6cc - 0xbdfe68c0 (3996 kB) [ 0.000000] .text : 0xbd800000 - 0xbdbff6cc (4093 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=c2406000 soft=c2408000 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] ACPI: setting ELCR to 0200 (from 0c00) [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3807 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2493.918 MHz processor [ 0.006666] Calibrating delay loop (skipped) preset value.. 4989.66 BogoMIPS (lpj=8313060) [ 0.006666] pid_max: default: 4096 minimum: 301 [ 0.006666] Security Framework initialized [ 0.006666] Mount-cache hash table entries: 512 [ 0.006666] Initializing cgroup subsys debug [ 0.006666] Initializing cgroup subsys devices [ 0.006678] Initializing cgroup subsys freezer [ 0.007044] Initializing cgroup subsys net_cls [ 0.007406] Initializing cgroup subsys perf_event [ 0.007793] Initializing cgroup subsys net_prio [ 0.008226] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.008226] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.008226] tlb_flushall_shift: 6 [ 0.009376] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.012880] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.015125] devtmpfs: initialized [ 0.017744] prandom: seed boundary self test passed [ 0.018615] prandom: 100 self tests passed [ 0.019400] NET: Registered protocol family 16 [ 0.020311] cpuidle: using governor ladder [ 0.020663] cpuidle: using governor menu [ 0.021315] ACPI: bus type PCI registered [ 0.021788] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.022312] PCI: Using configuration type 1 for base access [ 0.027340] ACPI: Added _OSI(Module Device) [ 0.027698] ACPI: Added _OSI(Processor Device) [ 0.028063] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.028445] ACPI: Added _OSI(Processor Aggregator Device) [ 0.035188] ACPI: Interpreter enabled [ 0.035505] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.036276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.036891] ACPI: (supports S0 S3 S5) [ 0.037198] ACPI: Using PIC for interrupt routing [ 0.037613] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.047701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.048226] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.048679] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.049496] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.050098] PCI host bridge to bus 0000:00 [ 0.050445] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.050895] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.051390] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.051889] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.052433] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.053380] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.054339] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.055411] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.058502] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.060210] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.061007] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.061597] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.062511] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.063929] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.065664] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.073389] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.074511] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.075897] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.077111] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.082182] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.083044] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.083818] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.087810] pci_bus 0000:00: on NUMA node 0 [ 0.088734] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.089407] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.090130] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.090779] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.091371] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.092422] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.093258] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.093342] vgaarb: loaded [ 0.093574] vgaarb: bridge control possible 0000:00:02.0 [ 0.094574] pps_core: LinuxPPS API ver. 1 registered [ 0.094989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.095739] PTP clock support registered [ 0.096707] EDAC MC: Ver: 3.0.0 [ 0.097416] PCI: Using ACPI for IRQ routing [ 0.097772] PCI: pci_cache_line_size set to 64 bytes [ 0.098290] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.098781] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.099598] NET: Registered protocol family 8 [ 0.100008] NET: Registered protocol family 20 [ 0.100486] nfc: nfc_init: NFC Core ver 0.1 [ 0.100902] NET: Registered protocol family 39 [ 0.101641] Switched to clocksource kvm-clock [ 0.102517] Warning: could not register annotated branches stats [ 0.138978] pnp: PnP ACPI init [ 0.139292] ACPI: bus type PNP registered [ 0.139752] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.140454] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.141075] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.141663] pnp 00:03: [dma 2] [ 0.141977] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.142632] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.143288] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.143991] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.144853] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.145593] pnp: PnP ACPI: found 8 devices [ 0.145935] ACPI: bus type PNP unregistered [ 0.181869] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.182444] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.182907] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.183498] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.184037] NET: Registered protocol family 1 [ 0.184426] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.184921] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.185408] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.185931] pci 0000:00:02.0: Boot video device [ 0.186328] PCI: CLS 0 bytes, default 64 [ 0.186938] Unpacking initramfs... [ 0.295164] debug: unmapping init [mem 0xc3cbd000-0xc3feffff] [ 0.296175] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 0.296865] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.297786] apm: BIOS not found. [ 0.298273] cryptomgr_test (15) used greatest stack depth: 7384 bytes left [ 0.299923] futex hash table entries: 16 (order: -3, 768 bytes) [ 0.304726] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.305249] fuse init (API version 7.22) [ 0.308721] NET: Registered protocol family 38 [ 0.309113] list_sort_test: start testing list_sort() [ 0.309756] test_string_helpers: Running tests... [ 0.310604] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.311021] crc32: self tests passed, processed 225944 bytes in 158900 nsec [ 0.311751] crc32c: CRC_LE_BITS = 64 [ 0.312043] crc32c: self tests passed, processed 225944 bytes in 79601 nsec [ 0.523179] crc32_combine: 8373 self tests passed [ 0.732396] crc32c_combine: 8373 self tests passed [ 0.733308] xz_dec_test: module loaded [ 0.733684] xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it. [ 0.734496] rbtree testing -> 9243 cycles [ 1.163954] augmented rbtree testing -> 11275 cycles [ 1.693041] ipmi message handler version 39.2 [ 1.693510] ipmi device interface [ 1.693834] IPMI System Interface driver. [ 1.694251] ipmi_si: Adding default-specified kcs state machine [ 1.694759] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 1.695577] ipmi_si: Interface detection failed [ 1.695961] tsc: Refined TSC clocksource calibration: 2493.973 MHz [ 1.696485] ipmi_si: Adding default-specified smic state machine [ 1.697055] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 1.697870] ipmi_si: Interface detection failed [ 1.698246] ipmi_si: Adding default-specified bt state machine [ 1.698733] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.699533] ipmi_si: Interface detection failed [ 1.699972] ipmi_si: Unable to find any System Interface(s) [ 1.700710] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.701341] ACPI: Power Button [PWRF] [ 1.735340] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.757952] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.759428] Non-volatile memory driver v1.3 [ 1.759787] toshiba: not a supported Toshiba laptop [ 1.760546] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 1.761139] platform pc8736x_gpio.0: no device found [ 1.761651] nsc_gpio initializing [ 1.761939] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 1.762361] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.763080] Hangcheck: Using getrawmonotonic(). [ 1.763713] dummy-irq: no IRQ given. Use irq=N [ 1.765031] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.765649] slram: not enough parameters. [ 1.805105] No valid DiskOnChip devices found [ 1.805534] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.806300] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.807115] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.807883] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.808636] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.809382] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 1.810182] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39 [ 1.810702] nand: Toshiba NAND 128MiB 1,8V 8-bit [ 1.811074] nand: 128MiB, SLC, page size: 512, OOB size: 16 [ 1.811602] flash size: 128 MiB [ 1.811869] page size: 512 bytes [ 1.812132] OOB area size: 16 bytes [ 1.812425] sector size: 16 KiB [ 1.812689] pages number: 262144 [ 1.812954] pages per sector: 32 [ 1.813223] bus width: 8 [ 1.813501] bits in sector size: 14 [ 1.813804] bits in page size: 9 [ 1.814071] bits in OOB size: 4 [ 1.814335] flash size with OOB: 135168 KiB [ 1.814674] page address bytes: 4 [ 1.814946] sector address bytes: 3 [ 1.815236] options: 0x42 [ 1.816856] Scanning device for bad blocks [ 1.861453] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 1.861957] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 1.862970] HSI/SSI char device loaded [ 1.863323] LocalTalk card not found; 220 = ff, 240 = ff. [ 1.864429] ipddp.c:v0.01 8/28/97 Bradford W. Johnson [ 1.865244] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson [ 1.866015] vcan: Virtual CAN interface driver [ 1.866395] CAN device driver interface [ 1.866764] sja1000 CAN netdevice driver [ 1.867103] sja1000_isa: insufficient parameters supplied [ 1.867877] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 1.867877] baycom_ser_hdx: version 0.10 [ 1.869462] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 1.869937] hdlcdrv: version 0.8 [ 1.870267] PPP generic driver version 2.4.2 [ 1.870804] PPP BSD Compression module registered [ 1.871211] PPP Deflate Compression module registered [ 1.871632] PPP MPPE Compression module registered [ 1.872026] NET: Registered protocol family 24 [ 1.872416] adummy: version 1.0 [ 1.872888] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.874233] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.874666] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.875398] mousedev: PS/2 mouse device common for all mice [ 1.875970] i2c /dev entries driver [ 1.876498] pps pps0: new PPS source ktimer [ 1.876922] pps pps0: ktimer PPS source registered [ 1.877324] Driver for 1-wire Dallas network protocol. [ 1.877811] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 1.878362] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 1.880076] applesmc: supported laptop not found! [ 1.880474] applesmc: driver init failed (ret=-19)! [ 1.881440] pc87360: PC8736x not detected, module not inserted [ 1.882587] acquirewdt: WDT driver for Acquire single board computer initialising [ 1.883287] acquirewdt: I/O address 0x0043 already in use [ 1.883798] acquirewdt: probe of acquirewdt failed with error -5 [ 1.884369] sc1200wdt: build 20020303 [ 1.884686] sc1200wdt: io parameter must be specified [ 1.885106] pc87413_wdt: Version 1.1 at io 0x2E [ 1.885559] pc87413_wdt: initialized. timeout=1 min [ 1.885989] pc87413_wdt: cannot request SWC region at 0xffff [ 1.886613] sbc60xxwdt: WDT driver for 60XX single board computer initialised. timeout=30 sec (nowayout=0) [ 1.887455] sbc7240_wdt: I/O address 0x0443 already in use [ 1.887935] cpu5wdt: misc_register failed [ 1.888270] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 1.889942] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 1.890552] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 1.891055] w83697hf_wdt: watchdog not found at address 0x2e [ 1.891518] w83697hf_wdt: No W83697HF/HG could be found [ 1.891935] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 1.892642] w83697ug_wdt: No W83697UG/UF could be found [ 1.893061] w83977f_wdt: driver v1.00 [ 1.893434] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 1.893973] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 1.894465] machzwd: no ZF-Logic found [ 1.894771] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 1.895393] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 1.896062] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 1.896888] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 1.898430] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 1.899096] hidraw: raw HID events driver (C) Jiri Kosina [ 1.900459] fake-fmc-carrier: mezzanine 0 [ 1.900809] Manufacturer: fake-vendor [ 1.901152] Product name: fake-design-for-testing [ 1.901637] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 1.902212] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards [ 1.903055] fmc fake-design-for-testing-f001: Driver has no ID: matches all [ 1.903788] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001" [ 1.904620] intel_rapl: driver does not support CPU family 15 model 6 [ 1.905444] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98 [ 1.906070] aedsp16: I/O, IRQ and DMA are mandatory [ 1.906470] pss: mss_io, mss_dma, mss_irq and pss_io must be set. [ 1.907016] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 [ 1.907647] ad1848: No ISAPnP cards found, trying standard ones... [ 1.908143] sb: Init: Starting Probe... [ 1.908487] sb: Init: Done [ 1.908730] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc [ 1.909355] uart6850: irq and io must be set. [ 1.909710] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 [ 1.910433] MIDI Loopback device driver [ 1.910995] NET: Registered protocol family 26 [ 1.911579] netem: version 1.3 [ 1.911855] u32 classifier [ 1.912084] Performance counters on [ 1.912445] NET: Registered protocol family 15 [ 1.912855] NET: Registered protocol family 4 [ 1.913257] NET: Registered protocol family 5 [ 1.914412] NET: Registered protocol family 6 [ 1.914815] NET: Registered protocol family 3 [ 1.915192] can: controller area network core (rev 20120528 abi 9) [ 1.915742] NET: Registered protocol family 29 [ 1.916115] can: broadcast manager protocol (rev 20120528 t) [ 1.916596] can: netlink gateway (rev 20130117) max_hops=1 [ 1.917174] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 1.917978] DECnet: Routing cache hash table of 256 buckets, 11Kbytes [ 1.918545] NET: Registered protocol family 12 [ 1.918958] 8021q: 802.1Q VLAN Support v1.8 [ 1.919393] 9pnet: Installing 9P2000 support [ 1.919811] NET: Registered protocol family 37 [ 1.920266] mpls_gso: MPLS GSO support [ 1.921157] IMA: No TPM chip found, activating TPM-bypass! [ 1.922137] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.922648] EDD information not available. [ 1.922981] ### dt-test ### No testcase data in device tree; not running tests [ 1.924270] debug: unmapping init [mem 0xbdfe7000-0xbe043fff] [ 1.932521] mount (77) used greatest stack depth: 6932 bytes left /etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: No such file or directory [ 1.940665] S00fbsetup (79) used greatest stack depth: 6752 bytes left Please wait: booting... Starting udev [ 1.960169] pidof (93) used greatest stack depth: 6688 bytes left error initializing inotify error sending message: Connection refused error sending message: Connection refused Starting Bootlog daemon: bootlogd: cannot find console device 4:64 under /dev bootlogd. [ 2.102078] chown (155) used greatest stack depth: 6476 bytes left [ 2.150553] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Configuring network interfaces... ifconfig: socket: Address family not supported by protocol done. hwclock: can't open '/dev/misc/rtc': No such file or directory Running postinst /etc/rpm-postinsts/100... [ 2.258025] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 2.258641] IP: [] hrtimer_force_reprogram+0x3d/0xb1 [ 2.259151] *pde = 00000000 [ 2.259412] Oops: 0000 [#1] DEBUG_PAGEALLOC [ 2.259786] CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.0-rc1-00080-g336ca19 #9 [ 2.260388] task: bdde5534 ti: bddda000 task.ti: bddda000 [ 2.260830] EIP: 0060:[] EFLAGS: 00210002 CPU: 0 [ 2.261278] EIP is at hrtimer_force_reprogram+0x3d/0xb1 [ 2.261284] EAX: bddfaf54 EBX: 00000030 ECX: 00000000 EDX: 7fffffff [ 2.261284] ESI: ffffffff EDI: bddfafd8 EBP: bdddbf48 ESP: bdddbf30 [ 2.261284] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 2.261284] CR0: 8005003b CR2: 00000010 CR3: 10f4e000 CR4: 00000690 [ 2.261284] Stack: [ 2.261284] 00000000 00000001 00000001 00000000 bdf3f17c bddfafa8 bdddbf64 bd84b845 [ 2.261284] 00000000 bdf3f17c bdf3f17c 00000001 00200046 bdddbf78 bd84c153 bdf3f17c [ 2.261284] 00000000 00000000 bdddbf84 bd84c19e 86969207 bdddbfa0 bd8771f0 86969207 [ 2.261284] Call Trace: [ 2.261284] [] __remove_hrtimer+0x59/0x7b [ 2.261284] [] hrtimer_try_to_cancel+0x7b/0xb4 [ 2.261284] [] hrtimer_cancel+0x12/0x1d [ 2.261284] [] tick_nohz_idle_exit+0x129/0x1f1 [ 2.261284] [] cpu_startup_entry+0x1fa/0x290 [ 2.261284] [] rest_init+0xa2/0xa7 [ 2.261284] [] start_kernel+0x3be/0x3c5 [ 2.261284] [] i386_start_kernel+0x79/0x7d [ 2.261284] Code: 55 ec ba ff ff ff 7f 89 75 f0 83 ce ff 83 cb ff 0f bc 7d f0 0f 44 fb 8d 4f 01 6b d9 30 85 c9 89 7d e8 8d 7c 18 54 74 38 8b 4f e0 <8b> 59 10 8b 49 0c 2b 4f f8 1b 5f fc 85 db 79 04 31 c9 31 db 39 [ 2.261284] EIP: [] hrtimer_force_reprogram+0x3d/0xb1 SS:ESP 0068:bdddbf30 [ 2.261284] CR2: 0000000000000010 [ 2.261284] ---[ end trace e155771ac78a2857 ]--- [ 2.261284] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.261284] Kernel Offset: 0xc800000 from 0xb1000000 (relocation range: 0xb0000000-0xc47fdfff) [ 2.261284] Rebooting in 10 seconds.. Elapsed time: 5 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-r1-0402/336ca196738842764df39fbd4d3f9129179b3e7d/vmlinuz-3.14.0-rc1-00080-g336ca19 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-r1-0402/linux-devel:devel-roam-i386-201404021703:336ca196738842764df39fbd4d3f9129179b3e7d:bisect-linux5/.vmlinuz-336ca196738842764df39fbd4d3f9129179b3e7d-20140404015707-25-lkp-ib04 branch=linux-devel/devel-roam-i386-201404021703 BOOT_IMAGE=/kernel/i386-randconfig-r1-0402/336ca196738842764df39fbd4d3f9129179b3e7d/vmlinuz-3.14.0-rc1-00080-g336ca19 drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::51109-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-lkp-ib04-9 -serial file:/dev/shm/kboot/serial-yocto-lkp-ib04-9 -daemonize -display none -monitor null