early console in setup code early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.14.0-rc5-00621-g12e364b (kbuild@brickland3) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP PREEMPT Mon Apr 7 18:17:48 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-br0-04050702/next:master:12e364b9f08aa335dc7716ce74113e834c993765:bisect-linux8/.vmlinuz-12e364b9f08aa335dc7716ce74113e834c993765-20140407181806-27-f4 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02992000, 0x02992fff] PGTABLE [ 0.000000] BRK [0x02993000, 0x02993fff] PGTABLE [ 0.000000] BRK [0x02994000, 0x02994fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13ffdfff] [ 0.000000] [mem 0x12800000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x02995000, 0x02995fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1293d000-0x13feffff] [ 0.000000] ACPI: RSDP 00000000000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000013ffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000013ffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000013ffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0000000013ffff40 000040 [ 0.000000] ACPI: SSDT 0000000013fff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000013fff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000013fff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13ffdfff] [ 0.000000] NODE_DATA [mem 0x12916000-0x1293cfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012600000 s77824 r8192 d20480 u1048576 [ 0.000000] pcpu-alloc: s77824 r8192 d20480 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-br0-04050702/next:master:12e364b9f08aa335dc7716ce74113e834c993765:bisect-linux8/.vmlinuz-12e364b9f08aa335dc7716ce74113e834c993765-20140407181806-27-f4 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b drbd.minor_count=8 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Memory: 270620K/327280K available (7567K kernel code, 1947K rwdata, 3744K rodata, 1664K init, 10248K bss, 56660K reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Linux version 3.14.0-rc5-00621-g12e364b (kbuild@brickland3) (gcc version 4.8.2 (Debian 4.8.2-18) ) #1 SMP PREEMPT Mon Apr 7 18:17:48 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-br0-04050702/next:master:12e364b9f08aa335dc7716ce74113e834c993765:bisect-linux8/.vmlinuz-12e364b9f08aa335dc7716ce74113e834c993765-20140407181806-27-f4 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] mpc: fdaf0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02992000, 0x02992fff] PGTABLE [ 0.000000] BRK [0x02993000, 0x02993fff] PGTABLE [ 0.000000] BRK [0x02994000, 0x02994fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12600000-0x127fffff] [ 0.000000] [mem 0x12600000-0x127fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x10000000-0x125fffff] [ 0.000000] [mem 0x10000000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12800000-0x13ffdfff] [ 0.000000] [mem 0x12800000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] BRK [0x02995000, 0x02995fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1293d000-0x13feffff] [ 0.000000] ACPI: RSDP 00000000000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000013ffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000013ffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000013ffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0000000013ffff40 000040 [ 0.000000] ACPI: SSDT 0000000013fff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000013fff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000013fff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13ffdfff] [ 0.000000] NODE_DATA [mem 0x12916000-0x1293cfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77822 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57b000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57a000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfffbffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880012600000 s77824 r8192 d20480 u1048576 [ 0.000000] pcpu-alloc: s77824 r8192 d20480 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-br0-04050702/next:master:12e364b9f08aa335dc7716ce74113e834c993765:bisect-linux8/.vmlinuz-12e364b9f08aa335dc7716ce74113e834c993765-20140407181806-27-f4 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b drbd.minor_count=8 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Memory: 270620K/327280K available (7567K kernel code, 1947K rwdata, 3744K rodata, 1664K init, 10248K bss, 56660K reserved) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:524544 nr_irqs:56 16 [ 0.000000] ACPI: Core revision 20131218 [ 0.000000] ACPI: All ACPI Tables successfully acquired [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] | Wound/wait tests | [ 0.000000] --------------------- [ 0.000000] ww api failures: ok | ok | ok | [ 0.000000] ww contexts mixing: ok | ok | [ 0.000000] finishing ww context: ok | ok | ok | ok | [ 0.000000] locking mismatches: ok | ok | ok | [ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.000000] spinlock nest unlocked: ok | [ 0.000000] ----------------------------------------------------- [ 0.000000] |block | try |context| [ 0.000000] ----------------------------------------------------- [ 0.000000] context: ok | ok | ok | [ 0.000000] try: ok | ok | ok | [ 0.000000] block: ok | ok | ok | [ 0.000000] spinlock: ok | ok | ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 253 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2693.415 MHz processor [ 0.010472] Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.28 BogoMIPS (lpj=8978050) [ 0.011135] pid_max: default: 32768 minimum: 301 [ 0.018634] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.020780] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.021969] Mount-cache hash table entries: 256 [ 0.045678] mce: CPU supports 10 MCE banks [ 0.055579] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.055579] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.055579] tlb_flushall_shift: 6 [ 0.065448] Freeing SMP alternatives memory: 28K (ffffffff81f88000 - ffffffff81f8f000) [ 0.098921] Getting VERSION: 50011 [ 0.099607] Getting VERSION: 50011 [ 0.100126] Getting ID: 0 [ 0.100621] Getting ID: ff000000 [ 0.101189] Getting LVT0: 8700 [ 0.101711] Getting LVT1: 8400 [ 0.102628] enabled ExtINT on CPU#0 [ 0.104418] ENABLING IO-APIC IRQs [ 0.105046] Synchronizing Arb IDs. [ 0.105621] init IO_APIC IRQs [ 0.106212] apic 0 pin 0 not connected [ 0.107612] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.110203] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.111578] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.112898] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.113333] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.113333] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.113333] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.113333] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.113455] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.114780] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.116113] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.116666] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.116666] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.116666] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.116666] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.116666] apic 0 pin 16 not connected [ 0.116666] apic 0 pin 17 not connected [ 0.116666] apic 0 pin 18 not connected [ 0.116666] apic 0 pin 19 not connected [ 0.116666] apic 0 pin 20 not connected [ 0.116666] apic 0 pin 21 not connected [ 0.116666] apic 0 pin 22 not connected [ 0.116666] apic 0 pin 23 not connected [ 0.116666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150519] smpboot: CPU0: Intel Core Processor (Haswell) (fam: 06, model: 3c, stepping: 01) [ 0.152673] Using local APIC timer interrupts. [ 0.152673] calibrating APIC timer ... [ 0.156666] ... lapic delta = 6249933 [ 0.156666] ... PM-Timer delta = 357951 [ 0.156666] ... PM-Timer result ok [ 0.156666] ..... delta 6249933 [ 0.156666] ..... mult: 268432605 [ 0.156666] ..... calibration result: 3333297 [ 0.156666] ..... CPU clock speed is 2693.2307 MHz. [ 0.156666] ..... host bus clock speed is 1000.0297 MHz. [ 0.158253] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.212859] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.227755] x86: Booting SMP configuration: [ 0.228536] .... node #0, CPUs: #1 [ 0.013333] masked ExtINT on CPU#1 [ 0.013333] calibrate_delay_direct() dropping max bogoMips estimate 2 = 62951025 [ 0.013333] calibrate_delay_direct() dropping max bogoMips estimate 4 = 54165614 [ 0.013333] calibrate_delay_direct() dropping max bogoMips estimate 0 = 24184775 [ 0.354326] x86: Booted up 1 node, 2 CPUs [ 0.355320] ---------------- [ 0.355817] | NMI testsuite: [ 0.356298] -------------------- [ 0.356712] remote IPI: ok | [ 0.365802] local IPI: ok | [ 0.376988] -------------------- [ 0.377552] Good, all 2 testcases passed! | [ 0.378339] --------------------------------- [ 0.379117] smpboot: Total of 2 processors activated (12727.96 BogoMIPS) [ 0.430161] devtmpfs: initialized [ 0.479012] prandom: seed boundary self test passed [ 0.485958] prandom: 100 self tests passed [ 0.500138] regulator-dummy: no parameters [ 0.509011] NET: Registered protocol family 16 [ 0.525246] cpuidle: using governor ladder [ 0.526371] cpuidle: using governor menu [ 0.530062] ACPI: bus type PCI registered [ 0.535190] PCI: Using configuration type 1 for base access [ 0.741242] bio: create slab at 0 [ 0.753432] ACPI: Added _OSI(Module Device) [ 0.753432] ACPI: Added _OSI(Processor Device) [ 0.754304] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.755367] ACPI: Added _OSI(Processor Aggregator Device) [ 0.914759] ACPI: Interpreter enabled [ 0.916424] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 0.918561] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 0.922709] ACPI: (supports S0 S3 S5) [ 0.923486] ACPI: Using IOAPIC for interrupt routing [ 0.927877] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.319420] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.320478] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments] [ 1.323624] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.336610] PCI host bridge to bus 0000:00 [ 1.336610] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.343355] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.347222] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.348500] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.350060] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 1.352588] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.363290] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.373249] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.379008] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 1.386537] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.386537] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.390107] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.399884] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.404610] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 1.407694] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 1.414337] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 1.422281] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 1.424357] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 1.427159] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 1.432772] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 1.439903] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 1.439903] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 1.465997] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.470698] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.474900] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.479072] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.481651] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.495527] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.512090] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.513401] vgaarb: loaded [ 1.514022] vgaarb: bridge control possible 0000:00:02.0 [ 1.535338] SCSI subsystem initialized [ 1.538909] libata version 3.00 loaded. [ 1.543023] ACPI: bus type USB registered [ 1.546715] usbcore: registered new interface driver usbfs [ 1.547879] usbcore: registered new interface driver hub [ 1.551763] usbcore: registered new device driver usb [ 1.557610] pps_core: LinuxPPS API ver. 1 registered [ 1.558619] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.560383] PTP clock support registered [ 1.563662] EDAC MC: Ver: 3.0.0 [ 1.567800] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 1.572176] PCI: Using ACPI for IRQ routing [ 1.573264] PCI: pci_cache_line_size set to 64 bytes [ 1.574000] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.576767] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 1.595475] irda_init() [ 1.598121] NET: Registered protocol family 23 [ 1.600928] Bluetooth: Core ver 2.18 [ 1.602483] NET: Registered protocol family 31 [ 1.603425] Bluetooth: HCI device and connection manager initialized [ 1.605025] Bluetooth: HCI socket layer initialized [ 1.606383] Bluetooth: L2CAP socket layer initialized [ 1.607368] Bluetooth: SCO socket layer initialized [ 1.608740] NET: Registered protocol family 8 [ 1.610074] NET: Registered protocol family 20 [ 1.617109] nfc: nfc_init: NFC Core ver 0.1 [ 1.619061] NET: Registered protocol family 39 [ 1.625330] Switched to clocksource hpet [ 1.632161] FS-Cache: Loaded [ 1.634024] pnp: PnP ACPI init [ 1.635612] ACPI: bus type PNP registered [ 1.638116] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.642352] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.644312] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.647442] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.649146] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.652138] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.654250] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.655817] pnp 00:03: [dma 2] [ 1.658182] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.660352] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.663741] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.665926] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.669272] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.671445] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:3) [ 1.674528] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.681646] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.686541] pnp: PnP ACPI: found 8 devices [ 1.687342] ACPI: bus type PNP unregistered [ 1.834273] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.835314] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.836188] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.837267] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 1.839156] NET: Registered protocol family 1 [ 1.840360] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.841374] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.842589] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.843765] pci 0000:00:02.0: Boot video device [ 1.844647] PCI: CLS 0 bytes, default 64 [ 1.857481] Trying to unpack rootfs image as initramfs... [ 11.979621] Freeing initrd memory: 23244K (ffff88001293d000 - ffff880013ff0000) [ 11.998014] RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32 Joules, 3 fixed counters 10737418240 ms ovfl timer [ 12.000508] Machine check injector initialized [ 12.041024] cryptomgr_test (35) used greatest stack depth: 6432 bytes left [ 12.084377] cryptomgr_test (37) used greatest stack depth: 5256 bytes left [ 12.178654] cryptomgr_test (54) used greatest stack depth: 4696 bytes left [ 12.189954] AVX2 version of gcm_enc/dec engaged. [ 12.225436] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 12.237364] AVX or AES-NI instructions are not detected. [ 12.238747] AVX instructions are not detected. [ 12.239891] AVX instructions are not detected. [ 12.240833] AVX instructions are not detected. [ 12.242162] AVX2 or AES-NI instructions are not detected. [ 12.243965] AVX2 instructions are not detected. [ 12.264722] futex hash table entries: 512 (order: 4, 65536 bytes) [ 12.267891] audit: initializing netlink subsys (disabled) [ 12.272444] audit: type=2000 audit(1396895292.266:1): initialized [ 12.380638] Kprobe smoke test started [ 12.500503] Kprobe smoke test passed successfully [ 12.526599] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 12.541438] VFS: Disk quotas dquot_6.5.2 [ 12.545209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 12.570425] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 12.572576] QNX4 filesystem 0.2.3 registered. [ 12.574071] QNX6 filesystem 1.0.0 registered. [ 12.581190] JFS: nTxBlock = 2296, nTxLock = 18368 [ 12.601122] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled [ 12.627768] GFS2 installed [ 12.628747] msgmni has been set to 574 [ 12.729897] alg: No test for crc32 (crc32-table) [ 12.736862] alg: No test for lz4hc (lz4hc-generic) [ 12.743625] alg: No test for stdrng (krng) [ 12.752557] NET: Registered protocol family 38 [ 12.756475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 12.757989] io scheduler noop registered (default) [ 12.759252] list_sort_test: start testing list_sort() [ 12.768781] test_string_helpers: Running tests... [ 12.770428] rbtree testing [ 12.992368] tsc: Refined TSC clocksource calibration: 2693.458 MHz [ 12.996333] Switched to clocksource tsc [ 15.986710] -> 86613 cycles [ 16.306983] augmented rbtree testing -> 137973 cycles [ 21.776247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.780248] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 21.782536] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.795659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 21.797837] ACPI: Power Button [PWRF] [ 23.007889] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 23.042640] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 23.079240] Non-volatile memory driver v1.3 [ 23.080665] smapi::smapi_init, ERROR invalid usSmapiID [ 23.081795] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 23.083975] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 23.085631] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 23.212759] brd: module loaded [ 23.230923] nbd: registered device at major 43 [ 23.347879] dummy-irq: no IRQ given. Use irq=N [ 23.351347] lkdtm: No crash points registered, enable through debugfs [ 23.354438] Phantom Linux Driver, version n0.9.8, init OK [ 23.356818] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 23.364084] Guest personality initialized and is inactive [ 23.367897] VMCI host device registered (name=vmci, major=10, minor=60) [ 23.369360] Initialized host personality [ 23.382593] usbcore: registered new interface driver pn533 [ 23.402753] emc: device handler registered [ 23.403788] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 23.408367] SCSI Media Changer driver v0.25 [ 23.411127] osd: LOADED open-osd 0.2.1 [ 23.430749] arcnet loaded. [ 23.431399] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 23.433140] slcan: serial line CAN interface driver [ 23.434128] slcan: 10 dynamic interface channels. [ 23.435364] CAN device driver interface [ 23.437054] usbcore: registered new interface driver esd_usb2 [ 23.438214] sja1000 CAN netdevice driver [ 23.440013] cc770: CAN netdevice driver [ 23.446557] usbcore: registered new interface driver mcs7780 [ 23.460715] ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware [ 23.462983] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 23.465349] usbcore: registered new interface driver pegasus [ 23.467376] usbcore: registered new interface driver r8152 [ 23.469270] usbcore: registered new interface driver ax88179_178a [ 23.471258] usbcore: registered new interface driver cdc_ether [ 23.473318] usbcore: registered new interface driver r815x [ 23.475197] usbcore: registered new interface driver cdc_eem [ 23.477165] usbcore: registered new interface driver net1080 [ 23.479083] usbcore: registered new interface driver rndis_host [ 23.481032] usbcore: registered new interface driver zaurus [ 23.483251] usbcore: registered new interface driver ipheth [ 23.485471] usbcore: registered new interface driver cdc_ncm [ 23.487423] usbcore: registered new interface driver cdc_mbim [ 23.488714] Fusion MPT base driver 3.04.20 [ 23.489645] Copyright (c) 1999-2008 LSI Corporation [ 23.491067] Fusion MPT FC Host driver 3.04.20 [ 23.517294] aoe: AoE v85 initialised. [ 23.528101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.529766] uhci_hcd: USB Universal Host Controller Interface driver [ 23.533031] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver [ 23.534244] Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 23.539393] usbcore: registered new interface driver cdc_wdm [ 23.542454] usbcore: registered new interface driver usb-storage [ 23.544445] usbcore: registered new interface driver ums-alauda [ 23.546510] usbcore: registered new interface driver ums_eneub6250 [ 23.551220] usbcore: registered new interface driver usbserial [ 23.553287] usbcore: registered new interface driver belkin_sa [ 23.555966] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 23.558692] usbcore: registered new interface driver digi_acceleport [ 23.560759] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 23.563165] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 23.565361] usbcore: registered new interface driver ftdi_sio [ 23.567306] usbserial: USB Serial support registered for FTDI USB Serial Device [ 23.569580] usbcore: registered new interface driver ipw [ 23.571247] usbserial: USB Serial support registered for IPWireless converter [ 23.573502] usbcore: registered new interface driver ir_usb [ 23.575353] usbserial: USB Serial support registered for IR Dongle [ 23.577285] usbcore: registered new interface driver navman [ 23.579153] usbserial: USB Serial support registered for navman [ 23.581026] usbcore: registered new interface driver pl2303 [ 23.583056] usbserial: USB Serial support registered for pl2303 [ 23.584818] usbcore: registered new interface driver qcaux [ 23.586836] usbserial: USB Serial support registered for qcaux [ 23.588700] usbcore: registered new interface driver qcserial [ 23.590549] usbserial: USB Serial support registered for Qualcomm USB modem [ 23.592659] usbcore: registered new interface driver symbolserial [ 23.594551] usbserial: USB Serial support registered for symbol [ 23.596538] usbcore: registered new interface driver ti_usb_3410_5052 [ 23.598594] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 23.600814] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 23.603216] usbcore: registered new interface driver keyspan_pda [ 23.605027] usbserial: USB Serial support registered for Keyspan PDA [ 23.607132] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) [ 23.609711] usbcore: registered new interface driver zte_ev [ 23.611679] usbserial: USB Serial support registered for zte_ev [ 23.613753] usbcore: registered new interface driver adutux [ 23.618097] usbcore: registered new interface driver appledisplay [ 23.620259] usbcore: registered new interface driver cytherm [ 23.622306] usbcore: registered new interface driver emi62 - firmware loader [ 23.624480] usbcore: registered new interface driver idmouse [ 23.626888] usbcore: registered new interface driver iowarrior [ 23.628948] usbcore: registered new interface driver isight_firmware [ 23.631010] usbcore: registered new interface driver usb_ehset_test [ 23.633179] usbcore: registered new interface driver yurex [ 23.637279] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 23.646797] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 23.652426] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 23.656049] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 23.670213] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 23.672455] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 23.696483] i2c /dev entries driver [ 23.699665] i2c-parport-light: adapter type unspecified [ 23.703799] pps pps0: new PPS source ktimer [ 23.704563] pps pps0: ktimer PPS source registered [ 23.705465] Driver for 1-wire Dallas network protocol. [ 23.709189] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 23.711867] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 23.736095] pc87360: PC8736x not detected, module not inserted [ 23.744724] usbcore: registered new interface driver pcwd_usb [ 23.747147] acquirewdt: WDT driver for Acquire single board computer initialising [ 23.750842] acquirewdt: I/O address 0x0043 already in use [ 23.751953] acquirewdt: probe of acquirewdt failed with error -5 [ 23.753170] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 23.756918] wafer5823wdt: initialized. timeout=60 sec (nowayout=1) [ 23.757903] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 23.759517] iTCO_vendor_support: vendor-support=0 [ 23.760361] sc1200wdt: build 20020303 [ 23.761544] sc1200wdt: io parameter must be specified [ 23.762850] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 23.766390] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 23.769108] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 23.770288] w83697hf_wdt: WDT driver for W83697HF/HG initializing [ 23.771363] w83697hf_wdt: watchdog not found at address 0x2e [ 23.772849] w83697hf_wdt: No W83697HF/HG could be found [ 23.773763] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising [ 23.775359] w83697ug_wdt: No W83697UG/UF could be found [ 23.776302] w83977f_wdt: driver v1.00 [ 23.777095] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 23.778225] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16) [ 23.900881] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/none/1.1.2.2 [ 23.902645] Modular ISDN core version 1.1.29 [ 23.906430] NET: Registered protocol family 34 [ 23.907268] DSP module 2.0 [ 23.907797] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies. [ 23.920869] mISDN: HFC-multi driver 2.03 [ 23.922983] Winbond W6692 PCI driver Rev. 2.0 [ 23.924743] Netjet PCI driver Rev. 2.0 [ 23.926579] mISDNipac module version 2.0 [ 23.927537] dss1_divert module successfully installed [ 23.929572] EDAC DEBUG: i5400_init: MC: [ 23.931410] EDAC DEBUG: i7core_init: [ 23.935654] EDAC DEBUG: i3000_init: i3000 pci_get_device fail [ 23.941334] ledtrig-cpu: registered to indicate activity on CPUs [ 23.958825] usbip_core: usbip_core_init:787: USB/IP Core v1.0.0 [ 23.962455] vhci_hcd: vhci_hcd_probe:997: name vhci_hcd id -1 [ 23.964236] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 23.970661] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1 [ 23.972457] vhci_hcd: vhci_start:881: enter vhci_start [ 24.005827] hub 1-0:1.0: USB hub found [ 24.007081] vhci_hcd: vhci_hub_control:244: typeReq a006 wValue 2900 wIndex 0 [ 24.008950] vhci_hcd: vhci_hub_control:302: GetHubDescriptor [ 24.010025] vhci_hcd: vhci_hub_control:395: port -1 [ 24.010810] vhci_hcd: vhci_hub_control:402: bye [ 24.012169] hub 1-0:1.0: 8 ports detected [ 24.013998] vhci_hcd: vhci_hub_control:244: typeReq a000 wValue 0 wIndex 0 [ 24.015372] vhci_hcd: vhci_hub_control:306: GetHubStatus [ 24.016282] vhci_hcd: vhci_hub_control:395: port -1 [ 24.017115] vhci_hcd: vhci_hub_control:402: bye [ 24.032409] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 1 [ 24.033605] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.034624] vhci_hcd: vhci_hub_control:395: port 0 [ 24.035510] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.036926] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.037762] vhci_hcd: dump_port_status_diff:119: [ 24.038640] vhci_hcd: vhci_hub_control:402: bye [ 24.039722] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 2 [ 24.040849] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.042011] vhci_hcd: vhci_hub_control:395: port 1 [ 24.042765] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.044112] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.044931] vhci_hcd: dump_port_status_diff:119: [ 24.045778] vhci_hcd: vhci_hub_control:402: bye [ 24.046769] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 3 [ 24.047825] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.048969] vhci_hcd: vhci_hub_control:395: port 2 [ 24.049901] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.051464] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.052657] vhci_hcd: dump_port_status_diff:119: [ 24.053716] vhci_hcd: vhci_hub_control:402: bye [ 24.054687] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 4 [ 24.055857] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.056931] vhci_hcd: vhci_hub_control:395: port 3 [ 24.057689] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.059086] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.060000] vhci_hcd: dump_port_status_diff:119: [ 24.060734] vhci_hcd: vhci_hub_control:402: bye [ 24.061744] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 5 [ 24.062839] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.063902] vhci_hcd: vhci_hub_control:395: port 4 [ 24.064655] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.066031] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.066932] vhci_hcd: dump_port_status_diff:119: [ 24.067672] vhci_hcd: vhci_hub_control:402: bye [ 24.068686] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 6 [ 24.069824] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.070820] vhci_hcd: vhci_hub_control:395: port 5 [ 24.071568] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.072980] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.073876] vhci_hcd: dump_port_status_diff:119: [ 24.074609] vhci_hcd: vhci_hub_control:402: bye [ 24.075602] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 7 [ 24.076733] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.077724] vhci_hcd: vhci_hub_control:395: port 6 [ 24.078609] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.079949] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.080773] vhci_hcd: dump_port_status_diff:119: [ 24.081506] vhci_hcd: vhci_hub_control:402: bye [ 24.082496] vhci_hcd: vhci_hub_control:244: typeReq 2303 wValue 8 wIndex 8 [ 24.083631] vhci_hcd: vhci_hub_control:381: SetPortFeature: default 8 [ 24.084623] vhci_hcd: vhci_hub_control:395: port 7 [ 24.085475] vhci_hcd: dump_port_status_diff:101: status prev -> new: 00000000 -> 00000100 [ 24.086814] vhci_hcd: dump_port_status_diff:115: +POWER [ 24.087636] vhci_hcd: dump_port_status_diff:119: [ 24.088495] vhci_hcd: vhci_hub_control:402: bye [ 24.094191] vhci_hcd: vhci_hcd_probe:1025: bye [ 24.095186] vhci_hcd: vhci_hcd_init:1147: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 24.097728] usbcore: registered new interface driver rts5139 [ 24.098774] rts5208: Initializing Realtek PCIE storage driver... [ 24.101951] usbcore: registered new interface driver tranzport [ 24.103930] usbcore: registered new interface driver alphatrack [ 24.105522] usbcore: registered new interface driver serqt_usb2 [ 24.107150] usbserial: USB Serial support registered for Quatech USB to Serial Driver [ 24.108675] Loading crystalhd 0.9.27 [ 24.114411] input: Speakup as /devices/virtual/input/input3 [ 24.115471] evbug: Connected device: input3 (Speakup at speakup/input0) [ 24.121851] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 24.124171] speakup 3.1.6: initialized [ 24.124925] synth name on entry is: (null) [ 24.125750] dgnc: dgnc-1.3-16, Digi International Part Number 40002369_F [ 24.127008] dgnc: For the tools package or updated drivers please visit http://www.digi.com [ 24.133596] FPGA DOWNLOAD ---> [ 24.134219] built at Mon Apr 7 18:02:05 2014 UTC [ 24.135101] FPGA image file name: xlinx_fpga_firmware.bit [ 24.137595] GPIO INIT FAIL!! [ 24.141283] driver version 1.0.0.0 loaded [ 24.142539] chipset driver version 1.0.0.0 loadedinvalid opcode: 0000 [#1] PREEMPT SMP [ 24.144793] Modules linked in: [ 24.145303] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc5-00621-g12e364b #1 [ 24.145303] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 24.145303] task: ffff88001157a010 ti: ffff88001157c000 task.ti: ffff88001157c000 [ 24.145303] RIP: 0010:[] [] visorchipset_init+0x7b/0x8c5 [ 24.145303] RSP: 0000:ffff88001157de58 EFLAGS: 00000286 [ 24.145303] RAX: 000000000000070b RBX: 0000000000000004 RCX: 4000000000000000 [ 24.145303] RDX: a70aba7500000000 RSI: ffff88001157de5c RDI: ffff88001157de58 [ 24.145303] RBP: ffff88001157de90 R08: 0000000000000002 R09: ffff88001157de60 [ 24.145303] R10: ffff88001157de64 R11: 0000000000000000 R12: ffff88001157de5c [ 24.145303] R13: ffff88001157de60 R14: ffff88001157de64 R15: 0000000000000000 [ 24.145303] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 24.145303] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 24.145303] CR2: ffff880002992000 CR3: 0000000001c07000 CR4: 00000000003006f0 [ 24.145303] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.145303] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 24.145303] Stack: [ 24.145303] 00000800000306c1 078bfbf982d82203 ffffffff81e3709a 0000000000000000 [ 24.145303] 00000000000001df 0000000000000000 0000000000000000 ffff88001157df08 [ 24.145303] ffffffff810002b2 ffffffff810b2600 ffff88001157df08 ffffffff810b27db [ 24.145303] Call Trace: [ 24.145303] [] ? visorchannel_init+0x1d/0x1d [ 24.145303] [] do_one_initcall+0x8e/0x138 [ 24.145303] [] ? param_array_set+0xef/0xf5 [ 24.145303] [] ? parse_args+0x180/0x248 [ 24.145303] [] kernel_init_freeable+0x108/0x199 [ 24.145303] [] ? do_early_param+0x8a/0x8a [ 24.145303] [] ? rest_init+0xc2/0xc2 [ 24.145303] [] kernel_init+0x9/0xda [ 24.145303] [] ret_from_fork+0x7c/0xb0 [ 24.145303] [] ? rest_init+0xc2/0xc2 [ 24.145303] Code: 8d 65 cc 4c 8d 6d d0 4c 8d 75 d4 79 21 48 ba 00 00 00 00 75 ba 0a a7 48 b9 00 00 00 00 00 00 00 40 bb 04 00 00 00 b8 0b 07 00 00 <0f> 01 c1 8b 35 c2 c4 b4 00 48 c7 c7 f5 93 b4 81 31 c0 e8 3b 21 [ 24.145303] RIP [] visorchipset_init+0x7b/0x8c5 [ 24.145303] RSP [ 24.187247] ---[ end trace 62b5721899a66a6c ]--- [ 24.188157] Kernel panic - not syncing: Fatal exception [ 24.189644] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 24.190080] Rebooting in 10 seconds.. Elapsed time: 35 qemu-system-x86_64 -cpu Haswell,+smep,+smap -kernel /kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-br0-04050702/next:master:12e364b9f08aa335dc7716ce74113e834c993765:bisect-linux8/.vmlinuz-12e364b9f08aa335dc7716ce74113e834c993765-20140407181806-27-f4 branch=next/master BOOT_IMAGE=/kernel/x86_64-randconfig-br0-04050702/12e364b9f08aa335dc7716ce74113e834c993765/vmlinuz-3.14.0-rc5-00621-g12e364b drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::50457-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-f4-128 -serial file:/dev/shm/kboot/serial-quantal-f4-128 -daemonize -display none -monitor null