lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 10 Apr 2014 08:51:37 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Chanwoo Choi <cw00.choi@...sung.com>
Cc:	Samuel Ortiz <sameo@...ux.intel.com>,
	Lee Jones <lee.jones@...aro.org>,
	Mark Brown <broonie@...nel.org>, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
	David Woodhouse <dwmw2@...radead.org>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	Tomasz Figa <t.figa@...sung.com>
Subject: Re: [PATCH v4 00/16] mfd: max14577: Add support for MAX77836

On czw, 2014-04-10 at 13:28 +0900, Chanwoo Choi wrote:
> Hi Krzysztof,
> 
> Did you finish this patchset for applying git repository?
> I can't find this patchset on mainline kernel.
> 
> If this patchset isn't applied on mainline, I'd like you to finish this patch
> because I want to maintain up to date patch for max77836/max14577 on mainline.

Hi,

The patches didn't get to mainline. I couldn't obtain all needed acks. I
prepared another version of the patchset (with less cross-subsystem
renames) which I plan to send after 3.15 merge window.

Best regards,
Krzysztof


> Thanks,
> Chanwoo Choi
> 
> On 02/24/2014 07:10 PM, Krzysztof Kozlowski wrote:
> > Hi,
> > 
> > 
> > This is fourth version of patchset adding support for MAX77836 device
> > to the max14577 driver.
> > 
> > Lee Jones suggested that after obtaining acks from all maintainers he can
> > merged these patches to his tree. These patches touch different subsystems
> > (charger/power, regulator, extcon and mfd) so this would be probably the best
> > way to merge everything. I would be glad if I could get missing acks
> > (or comments).
> > 
> > 
> > Changes since v3
> > ================
> > 1. Applied minor fixes (pointed by Lee Jones).
> > 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa).
> > 3. Patch 14/charger: Minor change in parsing EOC value from DTS.
> > 4. Rebased on next-20140224.
> > 
> > Changes since v2
> > ================
> > 1. Added ACK-s.
> > 2. Applied minor checkpatch fixes (pointed by Lee Jones).
> > 3. Rebased on next-20140217.
> > 
> > Changes since v1
> > ================
> > 1. Added ACK-s, reviews and tested-by tags.
> > 2. Removed applied patches (they were merged to the linux-next tree).
> > 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type)
> >    and 8/15 (add max77836 support to max14577).
> > 4. Rebased on next tree.
> > 5. Added patch 13 and 14 (pointed by Jenny Tc):
> >    - regulator/mfd: max14577: Export symbols for calculating charger current
> >    - charger: max14577: Configure battery-dependent settings from DTS
> > 6. Updated bindings documentation with new charger bindings.
> > Previous thread:
> >  - [PATCH 00/18] mfd: max14577: Add support for MAX77836
> >    http://thread.gmane.org/gmane.linux.kernel/1636654/focus=1636674
> > 
> > 
> > Description
> > ===========
> > The MAX77836 is almost the same as MAX14577. Basically it is an extended
> > version of MAX14577. The chipsets have same MUIC component so the extcon,
> > charger and regulators require only little adjustments. More changes were
> > needed in the charger (because it uses lower charging current) and regulator
> > drivers (because mentioned different charing current and additional
> > regulators). The MAX77836 has also PMIC and Fuel Gauge (which is the same
> > as MAX17040/17048 Fuel Gauge).
> > 
> > The MAX77836 uses three I2C slave addresses and has additional interrupts
> > (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> > just like MAX77686 and MAX77693.
> > 
> > The patchset is organized in following way:
> > 1. Patches from 1 to 7 prepare the driver for supporting MAX77836. They
> >    mostly rename symbols and add additional logic related to different
> >    device types.
> > 2. Patches from 8 to 12 add support for MAX77836.
> > 3. Patches 13 and 14 remove hard-coded charger configuration with DTS. They
> >    were added after review on mailing lists.
> > 4. Patch 15 adds bindings documentation, which was not merged previously.
> > 5. Patch 16 adds SUSPEND mode to the regulator driver.
> > 
> > 
> > The patchset is based on linux-next tree and depends on patches from previous
> > release which are already merged into next.
> > Testing was done on 3.10.
> > 
> > 
> > TODO: Merge max14577, max77686 and max77693 into one common driver. They are
> > very similar.
> > 
> > 
> > Best regards,
> > Krzysztof Kozlowski
> > 
> > 
> > Chanwoo Choi (1):
> >   extcon: max14577: Change extcon name instead of static name according
> >     to device type
> > 
> > Krzysztof Kozlowski (15):
> >   mfd: max14577: Rename and add MAX14577 symbols to prepare for
> >     max77836
> >   mfd: max14577: Rename state container to maxim_core
> >   mfd: max14577: Add "muic" suffix to regmap and irq_chip
> >   mfd: max14577: Add detection of device type
> >   extcon: max14577: Add max14577 prefix to muic_irqs
> >   extcon: max14577: Choose muic_irqs according to device type
> >   mfd: max77836: Add max77836 support to max14577 driver
> >   extcon: max14577: Add support for max77836
> >   regulator: max14577: Add support for max77836 regulators
> >   charger: max14577: Add support for MAX77836 charger
> >   power: max17040: Add ID for max77836 Fuel Gauge block
> >   regulator/mfd: max14577: Export symbols for calculating charger
> >     current
> >   charger: max14577: Configure battery-dependent settings from DTS
> >   mfd: max14577: Add device tree bindings document
> >   regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s
> > 
> >  Documentation/devicetree/bindings/mfd/max14577.txt |  149 +++++
> >  drivers/extcon/extcon-max14577.c                   |  274 +++++----
> >  drivers/mfd/max14577.c                             |  475 +++++++++++++---
> >  drivers/power/max14577_charger.c                   |  361 +++++++++---
> >  drivers/power/max17040_battery.c                   |    1 +
> >  drivers/regulator/max14577.c                       |  334 ++++++++---
> >  include/linux/mfd/max14577-private.h               |  586 ++++++++++++--------
> >  include/linux/mfd/max14577.h                       |   50 +-
> >  8 files changed, 1697 insertions(+), 533 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
> > 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ