linux-kernel - e1000e 0000:00:19.0 eth0: Hardware Error

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140410115941.GI29093@pd.tnic>
Date:	Thu, 10 Apr 2014 13:59:41 +0200
From:	Borislav Petkov <bp@...en8.de>
To:	e1000-devel@...ts.sourceforge.net
Cc:	netdev@...r.kernel.org, lkml <linux-kernel@...r.kernel.org>
Subject: e1000e 0000:00:19.0 eth0: Hardware Error

Hi guys,

I started getting those sporadic

[133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error
[133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error
[133182.077209] pci_pm_runtime_suspend(): e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2

messages with 3.14 and I haven't had them before. After this, I do

rmmod e1000e && modprobe e1000e

and I get:

[133221.891555] e1000e 0000:00:19.0 eth0: removed PHC
[133228.181552] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133228.181562] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133228.182332] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133229.009837] e1000e: probe of 0000:00:19.0 failed with error -2
			^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133307.107959] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133307.935921] e1000e: probe of 0000:00:19.0 failed with error -2

...

[133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133841.362520] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133842.192710] e1000e: probe of 0000:00:19.0 failed with error -2

each time I try and eth0 is dead. Only a reboot helps, I've come to find
out so far.

Any ideas?

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/