| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <10587037.4L52vlzy8d@amdc1032>
Date: Thu, 10 Apr 2014 14:43:22 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Naveen Krishna Ch <naveenkrishna.ch@...il.com>,
Zhang Rui <rui.zhang@...el.com>
Cc: Naveen Krishna Chatradhi <ch.naveen@...sung.com>,
linux-pm@...r.kernel.org, eduardo.valentin@...com,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>, linux-kernel@...r.kernel.org,
amit.daniel@...sung.com, Kukjin Kim <kgene.kim@...sung.com>,
devicetree@...r.kernel.org, cpgs@...sung.com, t.figa@...sung.com
Subject: Re: [PATCH v12 1/4] thermal: samsung: replace inten_ bit fields with
intclr_
Hi,
Zhang, could you please review/merge this patchset?
[ We have been waiting for a review for over 3 months now.. ]
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
On Friday, February 07, 2014 03:03:46 PM Naveen Krishna Ch wrote:
> Hello All,
>
> On 2 January 2014 08:03, Zhang Rui <rui.zhang@...el.com> wrote:
> > On Thu, 2013-12-19 at 11:35 +0530, Naveen Krishna Chatradhi wrote:
> >> This patch replaces the inten_rise_shift/mask and inten_fall_shift/mask
> >> with intclr_rise_shift/mask and intclr_fall_shift/mask respectively.
> >> Currently, inten_rise_shift/mask and inten_fall_shift/mask bits are only used
> >> to configure intclr related registers.
> >>
> >> Description of H/W:
> >> The offset for the bits in the CLEAR register are not consistent across TMU
> >> modules in Exynso5250, 5420 and 5440.
> >>
> >> On Exynos5250, the FALL interrupt related en, status and clear bits are
> >> available at an offset of
> >> 16 in INTEN, INTSTAT registers and at an offset of
> >> 12 in INTCLEAR register.
> >>
> >> On Exynos5420, the FALL interrupt related en, status and clear bits are
> >> available at an offset of
> >> 16 in INTEN, INTSTAT and INTCLEAR registers.
> >>
> >> On Exynos5440,
> >> the FALL_IRQEN bits are at an offset of 4
> >> and the RISE_IRQEN bits are at an offset of 0
> >>
> >> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@...sung.com>
> >> Acked-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
> >> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
> >> Reviewed-by: Tomasz Figa <t.figa@...sung.com>
> >
> > Eduardo,
> >
> > what do you think of this patch set?
> >
> > thanks,
> > rui
> >> ---
> >> Changes since v11:
> >> Added Reviewed by Tomasz
> >>
> >> Changes since v10:
> >> None
> >>
> >> drivers/thermal/samsung/exynos_tmu.c | 6 +++---
> >> drivers/thermal/samsung/exynos_tmu.h | 16 ++++++++--------
> >> drivers/thermal/samsung/exynos_tmu_data.c | 18 +++++++++---------
> >> drivers/thermal/samsung/exynos_tmu_data.h | 4 ++--
> >> 4 files changed, 22 insertions(+), 22 deletions(-)
> >>
> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> >> index 32f38b9..c493245 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu.c
> >> +++ b/drivers/thermal/samsung/exynos_tmu.c
> >> @@ -237,7 +237,7 @@ skip_calib_data:
> >> writeb(pdata->trigger_levels[i], data->base +
> >> reg->threshold_th0 + i * sizeof(reg->threshold_th0));
> >>
> >> - writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
> >> + writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
> >> } else {
> >> /* Write temperature code for rising and falling threshold */
> >> for (i = 0;
> >> @@ -264,8 +264,8 @@ skip_calib_data:
> >> writel(falling_threshold,
> >> data->base + reg->threshold_th1);
> >>
> >> - writel((reg->inten_rise_mask << reg->inten_rise_shift) |
> >> - (reg->inten_fall_mask << reg->inten_fall_shift),
> >> + writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
> >> + (reg->intclr_fall_mask << reg->intclr_fall_shift),
> >> data->base + reg->tmu_intclear);
> >>
> >> /* if last threshold limit is also present */
> >> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> >> index 3fb6554..980859a 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu.h
> >> +++ b/drivers/thermal/samsung/exynos_tmu.h
> >> @@ -122,10 +122,6 @@ enum soc_type {
> >> * @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
> >> * @tmu_inten: register containing the different threshold interrupt
> >> enable bits.
> >> - * @inten_rise_shift: shift bits of all rising interrupt bits.
> >> - * @inten_rise_mask: mask bits of all rising interrupt bits.
> >> - * @inten_fall_shift: shift bits of all rising interrupt bits.
> >> - * @inten_fall_mask: mask bits of all rising interrupt bits.
> >> * @inten_rise0_shift: shift bits of rising 0 interrupt bits.
> >> * @inten_rise1_shift: shift bits of rising 1 interrupt bits.
> >> * @inten_rise2_shift: shift bits of rising 2 interrupt bits.
> >> @@ -136,6 +132,10 @@ enum soc_type {
> >> * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
> >> * @tmu_intstat: Register containing the interrupt status values.
> >> * @tmu_intclear: Register for clearing the raised interrupt status.
> >> + * @intclr_fall_shift: shift bits for interrupt clear fall 0
> >> + * @intclr_rise_shift: shift bits of all rising interrupt bits.
> >> + * @intclr_rise_mask: mask bits of all rising interrupt bits.
> >> + * @intclr_fall_mask: mask bits of all rising interrupt bits.
> >> * @emul_con: TMU emulation controller register.
> >> * @emul_temp_shift: shift bits of emulation temperature.
> >> * @emul_time_shift: shift bits of emulation time.
> >> @@ -191,10 +191,6 @@ struct exynos_tmu_registers {
> >> u32 threshold_th3_l0_shift;
> >>
> >> u32 tmu_inten;
> >> - u32 inten_rise_shift;
> >> - u32 inten_rise_mask;
> >> - u32 inten_fall_shift;
> >> - u32 inten_fall_mask;
> >> u32 inten_rise0_shift;
> >> u32 inten_rise1_shift;
> >> u32 inten_rise2_shift;
> >> @@ -207,6 +203,10 @@ struct exynos_tmu_registers {
> >> u32 tmu_intstat;
> >>
> >> u32 tmu_intclear;
> >> + u32 intclr_fall_shift;
> >> + u32 intclr_rise_shift;
> >> + u32 intclr_fall_mask;
> >> + u32 intclr_rise_mask;
> >>
> >> u32 emul_con;
> >> u32 emul_temp_shift;
> >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> >> index 073c292..7cdb04e 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> >> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> >> @@ -40,13 +40,13 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
> >> .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
> >> .threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
> >> .tmu_inten = EXYNOS_TMU_REG_INTEN,
> >> - .inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
> >> .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
> >> .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
> >> .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
> >> .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
> >> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
> >> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
> >> + .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
> >> };
> >>
> >> struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
> >> @@ -112,10 +112,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> >> .threshold_th0 = EXYNOS_THD_TEMP_RISE,
> >> .threshold_th1 = EXYNOS_THD_TEMP_FALL,
> >> .tmu_inten = EXYNOS_TMU_REG_INTEN,
> >> - .inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
> >> - .inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
> >> - .inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
> >> - .inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
> >> .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
> >> .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
> >> .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
> >> @@ -123,6 +119,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
> >> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
> >> .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
> >> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
> >> + .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
> >> + .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
> >> + .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
> >> + .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
> >> .emul_con = EXYNOS_EMUL_CON,
> >> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> >> .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
> >> @@ -217,10 +217,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> >> .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
> >> .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
> >> .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
> >> - .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
> >> - .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
> >> - .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
> >> - .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
> >> .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
> >> .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
> >> .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
> >> @@ -228,6 +224,10 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> >> .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> >> .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> >> .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> >> + .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
> >> + .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
> >> + .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
> >> + .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
> >> .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> >> .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> >> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> >> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> >> index a1ea19d..d9495a4 100644
> >> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> >> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> >> @@ -69,9 +69,10 @@
> >> #define EXYNOS_TMU_RISE_INT_MASK 0x111
> >> #define EXYNOS_TMU_RISE_INT_SHIFT 0
> >> #define EXYNOS_TMU_FALL_INT_MASK 0x111
> >> -#define EXYNOS_TMU_FALL_INT_SHIFT 12
> >> #define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> >> #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> >> +#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
> >> +#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
> >> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> >> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> >> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
> >> @@ -119,7 +120,6 @@
> >> #define EXYNOS5440_TMU_RISE_INT_MASK 0xf
> >> #define EXYNOS5440_TMU_RISE_INT_SHIFT 0
> >> #define EXYNOS5440_TMU_FALL_INT_MASK 0xf
> >> -#define EXYNOS5440_TMU_FALL_INT_SHIFT 4
> >> #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
> >> #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
> >> #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
> >
> >
> Ping.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists