[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1397123934-27114-1-git-send-email-jacob.jun.pan@linux.intel.com>
Date: Thu, 10 Apr 2014 02:58:54 -0700
From: Jacob Pan <jacob.jun.pan@...ux.intel.com>
To: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Cc: Tejun Heo <tj@...nel.org>, Alan Cox <alan@...ux.intel.com>,
Dan Williams <dan.j.williams@...el.com>,
Kristen Carlson Accardi <kristen.c.accardi@...el.com>,
Jacob Pan <jacob.jun.pan@...ux.intel.com>
Subject: [PATCH] ahci: disable DEVSLP for Intel Valleyview
On Intel Valleyview SoC, SATA device sleep is not reliable. When
DEVSLP is attempted on certain SSDs, port_devslp write would fail
and result in malfunction of AHCI controller. AHCI controller may
be not shown in PCI enumeration after reset. Complete power source
removal may be required to recver from this failure. So we blacklist
this device and override host device reported capabilities such that
device LPM will only attempt slumber but not devslp.
Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
Acked-by: Dan Wiilliams <dan.j.williams@...el.com>
---
drivers/ata/ahci.c | 17 +++++++++++++++++
drivers/ata/ahci.h | 1 +
drivers/ata/libahci.c | 7 +++++++
3 files changed, 25 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5a0bf8e..24684a1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1115,6 +1115,19 @@ static bool ahci_broken_online(struct pci_dev *pdev)
return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
}
+#define PCI_DEVICE_ID_INTEL_VLV_SATA 0x0f23
+static bool ahci_broken_devslp(struct pci_dev *pdev)
+{
+ /* device with broken DEVSLP but still showing SDS capability */
+ static const struct pci_device_id ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_VLV_SATA) },
+ {}
+ };
+
+ return pci_match_id(ids, pdev);
+}
+
#ifdef CONFIG_ATA_ACPI
static void ahci_gtf_filter_workaround(struct ata_host *host)
{
@@ -1357,6 +1370,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];
+ /* must set flag prior to save config in order to take effect */
+ if (ahci_broken_devslp(pdev))
+ hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
+
/* save initial config */
ahci_pci_save_initial_config(pdev, hpriv);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 0b670c0..630089a 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -235,6 +235,7 @@ enum {
port start (wait until
error-handling stage) */
AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */
+ AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */
/* ap->flags bits */
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 8cd0184..32fd860 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -653,6 +653,13 @@ void ahci_save_initial_config(struct device *dev,
cap &= ~HOST_CAP_SNTF;
}
+ if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) {
+ dev_info(dev,
+ "controller can't do DEVSLP, turning off\n");
+ cap2 &= ~HOST_CAP2_SDS;
+ cap2 &= ~HOST_CAP2_SADM;
+ }
+
if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
cap |= HOST_CAP_FBS;
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists