| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LFD.2.11.1404140953490.980@knanqh.ubzr>
Date: Mon, 14 Apr 2014 09:55:34 -0400 (EDT)
From: Nicolas Pitre <nicolas.pitre@...aro.org>
To: Peter Zijlstra <peterz@...radead.org>
cc: mingo@...nel.org, tglx@...utronix.de, luto@...capital.net,
daniel.lezcano@...aro.org, umgwanakikbuti@...il.com,
linux-kernel@...r.kernel.org
Subject: Re: [RFC][PATCH 8/8] sched,idle: Reflow cpuidle_idle_call()
On Mon, 14 Apr 2014, Peter Zijlstra wrote:
> On Mon, Apr 14, 2014 at 10:59:11AM +0200, Peter Zijlstra wrote:
> > > Why not using braces here and moving the use_default code block inside
> > > it instead?
> >
> > I didn't because there's two goto use_default sites, but sure, I can do
> > that.
Ah, I initially missed the second site, but still.
> ---
> Subject: sched,idle: Reflow cpuidle_idle_call()
> From: Peter Zijlstra <peterz@...radead.org>
> Date: Fri Apr 11 13:55:48 CEST 2014
>
> Apply goto to reduce lines and nesting levels.
>
> Cc: Nicolas Pitre <nicolas.pitre@...aro.org>
> Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
> Cc: Thomas Gleixner <tglx@...utronix.de>
> Signed-off-by: Peter Zijlstra <peterz@...radead.org>
> Link: http://lkml.kernel.org/n/tip-xt260n72av3ip7jsaef2ps3h@git.kernel.org
Acked-by: Nicolas Pitre <nico@...aro.org>
> ---
> kernel/sched/idle.c | 131 +++++++++++++++++++++++-----------------------------
> 1 file changed, 58 insertions(+), 73 deletions(-)
>
> --- a/kernel/sched/idle.c
> +++ b/kernel/sched/idle.c
> @@ -73,7 +73,7 @@ static int cpuidle_idle_call(void)
> {
> struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
> struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
> - int next_state, entered_state, ret;
> + int next_state, entered_state;
> bool broadcast;
>
> /*
> @@ -102,90 +102,75 @@ static int cpuidle_idle_call(void)
> * Check if the cpuidle framework is ready, otherwise fallback
> * to the default arch specific idle method
> */
> - ret = cpuidle_enabled(drv, dev);
> -
> - if (!ret) {
> - /*
> - * Ask the governor to choose an idle state it thinks
> - * it is convenient to go to. There is *always* a
> - * convenient idle state
> - */
> - next_state = cpuidle_select(drv, dev);
> -
> + if (cpuidle_enabled(drv, dev)) {
> +use_default:
> /*
> - * The idle task must be scheduled, it is pointless to
> - * go to idle, just update no idle residency and get
> - * out of this function
> + * We can't use the cpuidle framework, let's use the default
> + * idle routine.
> */
> - if (current_clr_polling_and_test()) {
> - dev->last_residency = 0;
> - entered_state = next_state;
> + if (current_clr_polling_and_test())
> local_irq_enable();
> - } else {
> - broadcast = !!(drv->states[next_state].flags &
> - CPUIDLE_FLAG_TIMER_STOP);
> -
> - if (broadcast) {
> - /*
> - * Tell the time framework to switch
> - * to a broadcast timer because our
> - * local timer will be shutdown. If a
> - * local timer is used from another
> - * cpu as a broadcast timer, this call
> - * may fail if it is not available
> - */
> - ret = clockevents_notify(
> - CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
> - &dev->cpu);
> - }
> -
> - if (!ret) {
> - trace_cpu_idle_rcuidle(next_state, dev->cpu);
> -
> - /*
> - * Enter the idle state previously
> - * returned by the governor
> - * decision. This function will block
> - * until an interrupt occurs and will
> - * take care of re-enabling the local
> - * interrupts
> - */
> - entered_state = cpuidle_enter(drv, dev,
> - next_state);
> -
> - trace_cpu_idle_rcuidle(PWR_EVENT_EXIT,
> - dev->cpu);
> -
> - if (broadcast)
> - clockevents_notify(
> - CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
> - &dev->cpu);
> -
> - /*
> - * Give the governor an opportunity to reflect on the
> - * outcome
> - */
> - cpuidle_reflect(dev, entered_state);
> - }
> - }
> + else
> + arch_cpu_idle();
> +
> + goto exit_idle;
> }
>
> /*
> - * We can't use the cpuidle framework, let's use the default
> - * idle routine
> + * Ask the governor to choose an idle state it thinks
> + * it is convenient to go to. There is *always* a
> + * convenient idle state
> */
> - if (ret) {
> - if (!current_clr_polling_and_test())
> - arch_cpu_idle();
> - else
> - local_irq_enable();
> + next_state = cpuidle_select(drv, dev);
> +
> + /*
> + * The idle task must be scheduled, it is pointless to
> + * go to idle, just update no idle residency and get
> + * out of this function
> + */
> + if (current_clr_polling_and_test()) {
> + dev->last_residency = 0;
> + entered_state = next_state;
> + local_irq_enable();
> + goto exit_idle;
> }
>
> + broadcast = !!(drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP);
> +
> + /*
> + * Tell the time framework to switch to a broadcast timer
> + * because our local timer will be shutdown. If a local timer
> + * is used from another cpu as a broadcast timer, this call may
> + * fail if it is not available
> + */
> + if (broadcast &&
> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu))
> + goto use_default;
> +
> + trace_cpu_idle_rcuidle(next_state, dev->cpu);
> +
> + /*
> + * Enter the idle state previously returned by the governor decision.
> + * This function will block until an interrupt occurs and will take
> + * care of re-enabling the local interrupts
> + */
> + entered_state = cpuidle_enter(drv, dev, next_state);
> +
> + trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
> +
> + if (broadcast)
> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
> +
> + /*
> + * Give the governor an opportunity to reflect on the outcome
> + */
> + cpuidle_reflect(dev, entered_state);
> +
> +exit_idle:
> __current_set_polling();
>
> /*
> - * It is up to the idle functions to enable back the local
> - * interrupt
> + * It is up to the idle functions to reenable local interrupts
> */
> if (WARN_ON_ONCE(irqs_disabled()))
> local_irq_enable();
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists