| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1397492726-17203-17-git-send-email-nm@ti.com>
Date: Mon, 14 Apr 2014 11:25:26 -0500
From: Nishanth Menon <nm@...com>
To: Tony Lindgren <tony@...mide.com>,
Santosh Shilimkar <santosh.shilimkar@...com>,
Sricharan R <r.sricharan@...com>
CC: Sekhar Nori <nsekhar@...com>, Rajendra Nayak <rnayak@...com>,
Nishanth Menon <nm@...com>,
Peter Ujfalusi <peter.ujfalusi@...com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 15/15] bus: omap_l3_noc: Add AM4372 interconnect error data
From: Afzal Mohammed <afzal@...com>
Add AM4372 information to handle L3 error.
AM4372 has two clk domains 100f and 200s. Provide flagmux and data
associated with it.
NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware
team, L3 timeout error cannot be cleared the normal way (by setting
bit 31 in STDERRLOG_MAIN), instead it may be required to do system
reset. L3 error handler can't help in such scenarios.
Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as
done for undocumented bits.
Signed-off-by: Dave Gerlach <d-gerlach@...com>
Signed-off-by: Afzal Mohammed <afzal@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Nishanth Menon <nm@...com>
---
.../devicetree/bindings/arm/omap/l3-noc.txt | 1 +
drivers/bus/omap_l3_noc.c | 1 +
drivers/bus/omap_l3_noc.h | 85 ++++++++++++++++++++
3 files changed, 87 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 45d0fc2..974624e 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
Should be "ti,dra7-l3-noc" for DRA7 family
+ Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 9b32e53..9853e1d 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -177,6 +177,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
+ {.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
};
MODULE_DEVICE_TABLE(of, l3_noc_match);
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 365a33c..91814e0 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -339,4 +339,89 @@ static const struct omap_l3 dra_l3_data = {
.num_masters = ARRAY_SIZE(dra_l3_masters),
};
+/* AM4372 data */
+static struct l3_target_data am4372_l3_target_data_200f[] = {
+ {0xf00, "EMIF",},
+ {0x1200, "DES",},
+ {0x400, "OCMCRAM",},
+ {0x700, "TPTC0",},
+ {0x800, "TPTC1",},
+ {0x900, "TPTC2"},
+ {0xb00, "TPCC",},
+ {0xd00, "DEBUGSS",},
+ {0xdead, L3_TARGET_NOT_SUPPORTED,},
+ {0x200, "SHA",},
+ {0xc00, "SGX530",},
+ {0x500, "AES0",},
+ {0xa00, "L4_FAST",},
+ {0x300, "MPUSS_L2_RAM",},
+ {0x100, "ICSS",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_200f = {
+ .offset = 0x1000,
+ .l3_targ = am4372_l3_target_data_200f,
+ .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_200f),
+};
+
+static struct l3_target_data am4372_l3_target_data_100s[] = {
+ {0x100, "L4_PER_0",},
+ {0x200, "L4_PER_1",},
+ {0x300, "L4_PER_2",},
+ {0x400, "L4_PER_3",},
+ {0x800, "McASP0",},
+ {0x900, "McASP1",},
+ {0xC00, "MMCHS2",},
+ {0x700, "GPMC",},
+ {0xD00, "L4_FW",},
+ {0xdead, L3_TARGET_NOT_SUPPORTED,},
+ {0x500, "ADCTSC",},
+ {0xE00, "L4_WKUP",},
+ {0xA00, "MAG_CARD",},
+};
+
+static struct l3_flagmux_data am4372_l3_flagmux_100s = {
+ .offset = 0x600,
+ .l3_targ = am4372_l3_target_data_100s,
+ .num_targ_data = ARRAY_SIZE(am4372_l3_target_data_100s),
+};
+
+static struct l3_masters_data am4372_l3_masters[] = {
+ { 0x0, "M1 (128-bit)"},
+ { 0x0, "M2 (64-bit)"},
+ { 0x4, "DAP"},
+ { 0x5, "P1500"},
+ { 0xC, "ICSS0"},
+ { 0xD, "ICSS1"},
+ { 0x18, "TPTC0 Read"},
+ { 0x19, "TPTC0 Write"},
+ { 0x1A, "TPTC1 Read"},
+ { 0x1B, "TPTC1 Write"},
+ { 0x1C, "TPTC2 Read"},
+ { 0x1D, "TPTC2 Write"},
+ { 0x20, "SGX530"},
+ { 0x25, "DSS"},
+ { 0x28, "Crypto DMA RD"},
+ { 0x29, "Crypto DMA WR"},
+ { 0x2C, "VPFE0"},
+ { 0x2D, "VPFE1"},
+ { 0x30, "GEMAC"},
+ { 0x34, "USB0 RD"},
+ { 0x35, "USB0 WR"},
+ { 0x36, "USB1 RD"},
+ { 0x37, "USB1 WR"},
+};
+
+static struct l3_flagmux_data *am4372_l3_flagmux[] = {
+ &am4372_l3_flagmux_200f,
+ &am4372_l3_flagmux_100s,
+};
+
+static const struct omap_l3 am4372_l3_data = {
+ .l3_flagmux = am4372_l3_flagmux,
+ .num_modules = ARRAY_SIZE(am4372_l3_flagmux),
+ .l3_masters = am4372_l3_masters,
+ .num_masters = ARRAY_SIZE(am4372_l3_masters),
+};
+
#endif /* __OMAP_L3_NOC_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists