| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1397552118.1985.16.camel@x220>
Date: Tue, 15 Apr 2014 10:55:18 +0200
From: Paul Bolle <pebolle@...cali.nl>
To: Matt Mackall <mpm@...enic.com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Jamie Iles <jamie@...ieiles.com>
Cc: Richard Weinberger <richard@....at>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] hwrng: remove unbuildable picoxcell TRNG
The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.
Signed-off-by: Paul Bolle <pebolle@...cali.nl>
---
Tested only by grepping the tree!
drivers/char/hw_random/Kconfig | 12 ---
drivers/char/hw_random/Makefile | 1 -
drivers/char/hw_random/picoxcell-rng.c | 181 ---------------------------------
3 files changed, 194 deletions(-)
delete mode 100644 drivers/char/hw_random/picoxcell-rng.c
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 244759bbd7b7..d994c85a923c 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -251,18 +251,6 @@ config HW_RANDOM_NOMADIK
If unsure, say Y.
-config HW_RANDOM_PICOXCELL
- tristate "Picochip picoXcell true random number generator support"
- depends on HW_RANDOM && ARCH_PICOXCELL && PICOXCELL_PC3X3
- ---help---
- This driver provides kernel-side support for the Random Number
- Generator hardware found on Picochip PC3x3 and later devices.
-
- To compile this driver as a module, choose M here: the
- module will be called picoxcell-rng.
-
- If unsure, say Y.
-
config HW_RANDOM_PPC4XX
tristate "PowerPC 4xx generic true random number generator support"
depends on HW_RANDOM && PPC && 4xx
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 3ae7755a52e7..199ed283e149 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
-obj-$(CONFIG_HW_RANDOM_PICOXCELL) += picoxcell-rng.o
obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
obj-$(CONFIG_HW_RANDOM_POWERNV) += powernv-rng.o
diff --git a/drivers/char/hw_random/picoxcell-rng.c b/drivers/char/hw_random/picoxcell-rng.c
deleted file mode 100644
index eab5448ad56f..000000000000
--- a/drivers/char/hw_random/picoxcell-rng.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@...ochip.com
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/hw_random.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#define DATA_REG_OFFSET 0x0200
-#define CSR_REG_OFFSET 0x0278
-#define CSR_OUT_EMPTY_MASK (1 << 24)
-#define CSR_FAULT_MASK (1 << 1)
-#define TRNG_BLOCK_RESET_MASK (1 << 0)
-#define TAI_REG_OFFSET 0x0380
-
-/*
- * The maximum amount of time in microseconds to spend waiting for data if the
- * core wants us to wait. The TRNG should generate 32 bits every 320ns so a
- * timeout of 20us seems reasonable. The TRNG does builtin tests of the data
- * for randomness so we can't always assume there is data present.
- */
-#define PICO_TRNG_TIMEOUT 20
-
-static void __iomem *rng_base;
-static struct clk *rng_clk;
-static struct device *rng_dev;
-
-static inline u32 picoxcell_trng_read_csr(void)
-{
- return __raw_readl(rng_base + CSR_REG_OFFSET);
-}
-
-static inline bool picoxcell_trng_is_empty(void)
-{
- return picoxcell_trng_read_csr() & CSR_OUT_EMPTY_MASK;
-}
-
-/*
- * Take the random number generator out of reset and make sure the interrupts
- * are masked. We shouldn't need to get large amounts of random bytes so just
- * poll the status register. The hardware generates 32 bits every 320ns so we
- * shouldn't have to wait long enough to warrant waiting for an IRQ.
- */
-static void picoxcell_trng_start(void)
-{
- __raw_writel(0, rng_base + TAI_REG_OFFSET);
- __raw_writel(0, rng_base + CSR_REG_OFFSET);
-}
-
-static void picoxcell_trng_reset(void)
-{
- __raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + CSR_REG_OFFSET);
- __raw_writel(TRNG_BLOCK_RESET_MASK, rng_base + TAI_REG_OFFSET);
- picoxcell_trng_start();
-}
-
-/*
- * Get some random data from the random number generator. The hw_random core
- * layer provides us with locking.
- */
-static int picoxcell_trng_read(struct hwrng *rng, void *buf, size_t max,
- bool wait)
-{
- int i;
-
- /* Wait for some data to become available. */
- for (i = 0; i < PICO_TRNG_TIMEOUT && picoxcell_trng_is_empty(); ++i) {
- if (!wait)
- return 0;
-
- udelay(1);
- }
-
- if (picoxcell_trng_read_csr() & CSR_FAULT_MASK) {
- dev_err(rng_dev, "fault detected, resetting TRNG\n");
- picoxcell_trng_reset();
- return -EIO;
- }
-
- if (i == PICO_TRNG_TIMEOUT)
- return 0;
-
- *(u32 *)buf = __raw_readl(rng_base + DATA_REG_OFFSET);
- return sizeof(u32);
-}
-
-static struct hwrng picoxcell_trng = {
- .name = "picoxcell",
- .read = picoxcell_trng_read,
-};
-
-static int picoxcell_trng_probe(struct platform_device *pdev)
-{
- int ret;
- struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- rng_base = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(rng_base))
- return PTR_ERR(rng_base);
-
- rng_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(rng_clk)) {
- dev_warn(&pdev->dev, "no clk\n");
- return PTR_ERR(rng_clk);
- }
-
- ret = clk_enable(rng_clk);
- if (ret) {
- dev_warn(&pdev->dev, "unable to enable clk\n");
- return ret;
- }
-
- picoxcell_trng_start();
- ret = hwrng_register(&picoxcell_trng);
- if (ret)
- goto err_register;
-
- rng_dev = &pdev->dev;
- dev_info(&pdev->dev, "pixoxcell random number generator active\n");
-
- return 0;
-
-err_register:
- clk_disable(rng_clk);
- return ret;
-}
-
-static int picoxcell_trng_remove(struct platform_device *pdev)
-{
- hwrng_unregister(&picoxcell_trng);
- clk_disable(rng_clk);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int picoxcell_trng_suspend(struct device *dev)
-{
- clk_disable(rng_clk);
-
- return 0;
-}
-
-static int picoxcell_trng_resume(struct device *dev)
-{
- return clk_enable(rng_clk);
-}
-
-static const struct dev_pm_ops picoxcell_trng_pm_ops = {
- .suspend = picoxcell_trng_suspend,
- .resume = picoxcell_trng_resume,
-};
-#endif /* CONFIG_PM */
-
-static struct platform_driver picoxcell_trng_driver = {
- .probe = picoxcell_trng_probe,
- .remove = picoxcell_trng_remove,
- .driver = {
- .name = "picoxcell-trng",
- .owner = THIS_MODULE,
-#ifdef CONFIG_PM
- .pm = &picoxcell_trng_pm_ops,
-#endif /* CONFIG_PM */
- },
-};
-
-module_platform_driver(picoxcell_trng_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jamie Iles");
-MODULE_DESCRIPTION("Picochip picoXcell TRNG driver");
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists