| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <534CFA77.9030108@gmail.com>
Date: Tue, 15 Apr 2014 11:23:03 +0200
From: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To: Antoine Ténart
<antoine.tenart@...e-electrons.com>
CC: alexandre.belloni@...e-electrons.com, zmxu@...vell.com,
jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q
On 04/15/2014 10:07 AM, Antoine Ténart wrote:
> The Marvell Berlin BG2Q has 6 GPIO ports compatible with the snps,dw-apb-gpio
> driver. This patch add the corresponding device tree nodes.
>
> Signed-off-by: Antoine Ténart <antoine.tenart@...e-electrons.com>
> ---
> arch/arm/boot/dts/berlin2q.dtsi | 102 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 102 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index e6e556055dfc..b2625f896bc5 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -109,6 +109,78 @@
> ranges = <0 0xe80000 0x10000>;
> interrupt-parent = <&aic>;
>
> + gpio0: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x0400 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + porta: gpio-controller@0 {
ePAPR recommended name is even more generic, i.e. "gpio". If
that clashed in any way with other numbered names, I suggest
to rename to "gpio-port" as actually the controller is the
parent node and this represents one port (in the nomenclature
of DW-APB-GPIO).
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
32 gpio pins for each of the 6 GPIO controllers? Either BG2Q is a GPIO
beast or it is a mistake :P
Can you please double-check?
I am fine with using nr-gpios property now, but I guess BG2Q also
has that CONFIG[1,2] registers to actually read out the features
synthesized in? If I find some time, I'll prepare a patch for
dw-apb-gpio to exploit that (optional) information instead of
using nr-gpios.
Otherwise,
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0>;
> + };
> + };
> +
> + gpio1: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x0800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + portb: gpio-controller@1 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <1>;
> + };
> + };
> +
> + gpio2: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x0c00 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + portc: gpio-controller@2 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <2>;
> + };
> + };
> +
> + gpio3: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x1000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + portd: gpio-controller@3 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <3>;
> + };
> + };
> +
> timer0: timer@...0 {
> compatible = "snps,dw-apb-timer";
> reg = <0x2c00 0x14>;
> @@ -181,6 +253,36 @@
> interrupt-parent = <&gic>;
> interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + gpio4: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x5000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + porte: gpio-controller@4 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + };
> + };
> +
> + gpio5: gpio@...0 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0xc000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + portf: gpio-controller@5 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + };
> + };
> };
>
> pinctrl: pinctrl@0 {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists