| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1397557690-5650-11-git-send-email-alexandre.belloni@free-electrons.com>
Date: Tue, 15 Apr 2014 12:28:05 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Nicolas Ferre <nicolas.ferre@...el.com>,
Jonathan Cameron <jic23@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-iio@...r.kernel.org, linux-input@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv3 10/15] ARM: at91: sam9g45: switch from atmel_tsadcc to at91_adc
atmel_tsadcc is not allowing to use the remaining ADC channels while at91_adc
does. Completely switch to at91_adc and remove the tsadcc platform_data for
at91sam9g45 and at91sam9g45 based boards.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/configs/at91sam9g45_defconfig | 3 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 53 +-------------------------------
arch/arm/mach-at91/board-sam9m10g45ek.c | 15 ++-------
3 files changed, 5 insertions(+), 66 deletions(-)
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index e181a50fd65a..c6661a60025d 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y
@@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_DMATEST=m
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d186f474b83c..3cec148bad5a 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1132,58 +1132,7 @@ static void __init at91_add_device_rtc(void) {}
/* --------------------------------------------------------------------
- * Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TSC,
- .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9g45_tsadcc_device = {
- .name = "atmel_tsadcc",
- .id = -1,
- .dev = {
- .dma_mask = &tsadcc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tsadcc_data,
- },
- .resource = tsadcc_resources,
- .num_resources = ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
- if (!data)
- return;
-
- at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
- at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
- at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
- at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
-
- tsadcc_data = *data;
- platform_device_register(&at91sam9g45_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * ADC
+ * ADC and touchscreen
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_AT91_ADC)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 4d775b796ce4..f2f7ce9643ce 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -300,16 +300,7 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
/*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
- .adc_clock = 300000,
- .pendet_debounce = 0x0d,
- .ts_sample_hold_time = 0x0a,
-};
-
-/*
- * ADCs
+ * ADCs and touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
@@ -486,9 +477,7 @@ static void __init ek_board_init(void)
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
- /* Touch Screen */
- at91_add_device_tsadcc(&ek_tsadcc_data);
- /* ADC */
+ /* ADC and touchscreen */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists