lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 14 Apr 2014 18:42:41 -0700
From:	Andrew Bresticker <abrestic@...omium.org>
To:	Stephen Warren <swarren@...dotorg.org>,
	Thierry Reding <thierry.reding@...il.com>,
	Chris Ball <chris@...ntf.net>,
	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	linux-mmc@...r.kernel.org, linux-tegra@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Andrew Bresticker <abrestic@...omium.org>
Subject: [PATCH 2/4] mmc: tegra: fix reporting of base clock frequency

Tegra SDHCI controllers, by default, report a base clock frequency
of 208Mhz in SDHCI_CAPABILTIES which may or may not be equal to the
actual base clock frequency.  While this can be overridden by setting
BASE_CLK_FREQ in VENDOR_CLOCK_CTRL on Tegra30 and later SoCs, just
set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN and supply a get_max_clock()
callback to get the actual rate of the base clock.

Signed-off-by: Andrew Bresticker <abrestic@...omium.org>
---
 drivers/mmc/host/sdhci-tegra.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 3cadd9c..c3f92d9 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -165,13 +165,15 @@ static const struct sdhci_ops tegra_sdhci_ops = {
 	.write_l    = tegra_sdhci_writel,
 	.platform_bus_width = tegra_sdhci_buswidth,
 	.platform_reset_exit = tegra_sdhci_reset_exit,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
@@ -186,7 +188,8 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
@@ -202,7 +205,8 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_NO_HISPD_BIT |
-		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
+		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
 	.ops  = &tegra_sdhci_ops,
 };
 
-- 
1.9.1.423.g4596e3a

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists