linux-kernel - [PATCH 4/6] mfd: stmpe: mask off unused blocks properly

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 16 Apr 2014 16:44:13 +0200
From:	Linus Walleij <linus.walleij@...aro.org>
To:	Samuel Ortiz <sameo@...ux.intel.com>,
	Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org
Cc:	Silvio F <silvio.fricke@...il.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Shawn Guo <shawn.guo@...aro.org>,
	Viresh Kumar <viresh.linux@...il.com>,
	Shiraz Hashim <shiraz.hashim@...com>, spear-devel@...t.st.com,
	Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 4/6] mfd: stmpe: mask off unused blocks properly

The STMPE driver would just read/modify/write the system control
register on the STMPE1601, meaning it would not properly mask off
the PWM block, which remained active if it was on at boot time.
This makes sure the blocks are always masked off if they were
active on boot, saving some power. Also rename the inconsistenty
named STMPE1601 define for the PWM block activation.

Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/mfd/stmpe.c | 9 +++++++++
 drivers/mfd/stmpe.h | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 692452442ead..065c923cb2a9 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -606,9 +606,18 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
 
 	if (blocks & STMPE_BLOCK_GPIO)
 		mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
 
 	if (blocks & STMPE_BLOCK_KEYPAD)
 		mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+	if (blocks & STMPE_BLOCK_PWM)
+		mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
 
 	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
 				enable ? mask : 0);
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 6639f1b0fef5..9e4d21d37a11 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -192,7 +192,7 @@ int stmpe_remove(struct stmpe *stmpe);
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
 #define STMPE1601_SYS_CTRL_ENABLE_KPC		(1 << 1)
-#define STMPE1601_SYSCON_ENABLE_SPWM		(1 << 0)
+#define STMPE1601_SYS_CTRL_ENABLE_SPWM		(1 << 0)
 
 /* The 1601/2403 share the same masks */
 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK	(0x7)
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/