[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1397668667-27328-3-git-send-email-ynvich@gmail.com>
Date: Wed, 16 Apr 2014 21:17:14 +0400
From: Sergei Ianovich <ynvich@...il.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Sergei Ianovich <ynvich@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Randy Dunlap <rdunlap@...radead.org>,
Russell King <linux@....linux.org.uk>,
Alessandro Zummo <a.zummo@...ertech.it>,
Grant Likely <grant.likely@...aro.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND...),
linux-doc@...r.kernel.org (open list:DOCUMENTATION),
rtc-linux@...glegroups.com
Subject: [PATCH v4 09/21] rtc: support DS1302 RTC on ICP DAS LP-8x4x
Signed-off-by: Sergei Ianovich <ynvich@...il.com>
---
v3..v4
* move DTS bindings to a different patch (8/21)
v2..v3
* use usleep_range instead of custom nsleep
* number change (07/16 -> 09/21)
v0..v2
* use device tree
* use devm helpers where possible
.../devicetree/bindings/rtc/rtc-ds1302.txt | 14 +++
arch/arm/configs/lp8x4x_defconfig | 1 +
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-ds1302.c | 100 ++++++++++++++++++++-
4 files changed, 114 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
new file mode 100644
index 0000000..810613b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
@@ -0,0 +1,14 @@
+* Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+Required properties:
+- compatible : Should be "dallas,rtc-ds1302"
+- reg : Should be address and size of IO memory region
+
+Examples:
+
+rtc@...00000 {
+ compatible = "dallas,rtc-ds1302";
+ reg = <0x1700901c 0x1>;
+};
diff --git a/arch/arm/configs/lp8x4x_defconfig b/arch/arm/configs/lp8x4x_defconfig
index 9f1efb6..d60e37a 100644
--- a/arch/arm/configs/lp8x4x_defconfig
+++ b/arch/arm/configs/lp8x4x_defconfig
@@ -141,6 +141,7 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_PXA=m
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=m
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2e565f8..80aaaa1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -710,7 +710,7 @@ config RTC_DRV_DS1286
config RTC_DRV_DS1302
tristate "Dallas DS1302"
- depends on SH_SECUREEDGE5410
+ depends on SH_SECUREEDGE5410 || (ARCH_PXA && HIGH_RES_TIMERS)
help
If you say yes here you get support for the Dallas DS1302 RTC chips.
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 07e8d79..3c49023 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -50,7 +50,7 @@
#define ds1302_set_tx()
#define ds1302_set_rx()
-static inline int ds1302_hw_init(void)
+static inline int ds1302_hw_init(struct platform_device *pdev)
{
return 0;
}
@@ -86,6 +86,101 @@ static inline int ds1302_rxbit(void)
return !!(get_dp() & RTC_IODATA);
}
+#elif defined(CONFIG_ARCH_PXA) && defined(CONFIG_HIGH_RES_TIMERS)
+
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#define RTC_CE 0x01
+#define RTC_CLK 0x02
+#define RTC_nWE 0x04
+#define RTC_IODATA 0x08
+
+static unsigned long ds1302_state;
+
+static void *mem;
+
+static inline int ds1302_hw_init(struct platform_device *pdev)
+{
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ mem = devm_ioremap_resource(&pdev->dev, r);
+ if (!mem)
+ return -EFAULT;
+
+ return 0;
+}
+
+static inline void ds1302_reset(void)
+{
+ ds1302_state = 0;
+ iowrite8(ds1302_state, mem);
+ usleep_range(4, 5);
+}
+
+static inline void ds1302_clock(void)
+{
+ usleep_range(1, 2);
+ ds1302_state |= RTC_CLK;
+ iowrite8(ds1302_state, mem);
+ usleep_range(1, 2);
+ ds1302_state &= ~RTC_CLK;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_start(void)
+{
+ ds1302_state &= ~RTC_CLK;
+ ds1302_state |= RTC_CE;
+ iowrite8(ds1302_state, mem);
+ usleep_range(3, 4);
+}
+
+static inline void ds1302_stop(void)
+{
+ ds1302_state &= ~RTC_CE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_tx(void)
+{
+ ds1302_state &= ~RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_rx(void)
+{
+ ds1302_state |= RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_txbit(int bit)
+{
+ if (bit)
+ ds1302_state |= RTC_IODATA;
+ else
+ ds1302_state &= ~RTC_IODATA;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline int ds1302_rxbit(void)
+{
+ return ioread8(mem) & 0x1;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1302_dt_ids[] = {
+ { .compatible = "dallas,rtc-ds1302" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, ds1302_dt_ids);
+#endif
+
#else
#error "Add support for your platform"
#endif
@@ -216,7 +311,7 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
- if (ds1302_hw_init()) {
+ if (ds1302_hw_init(pdev)) {
dev_err(&pdev->dev, "Failed to init communication channel");
return -EINVAL;
}
@@ -245,6 +340,7 @@ static struct platform_driver ds1302_platform_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ds1302_dt_ids),
},
};
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists