| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1397668667-27328-6-git-send-email-ynvich@gmail.com>
Date: Wed, 16 Apr 2014 21:17:17 +0400
From: Sergei Ianovich <ynvich@...il.com>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Sergei Ianovich <ynvich@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Randy Dunlap <rdunlap@...radead.org>,
Russell King <linux@....linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.cz>,
Grant Likely <grant.likely@...aro.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Arnd Bergmann <arnd@...db.de>, Paul Bolle <pebolle@...cali.nl>,
Stefan Seyfried <seife+kernel@...systems.com>,
James Cameron <quozl@...top.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND...),
linux-doc@...r.kernel.org (open list:DOCUMENTATION),
linux-serial@...r.kernel.org (open list:SERIAL DRIVERS)
Subject: [PATCH v4 12/21] serial: support for 16550A serial ports on LP-8x4x
The patch adds support for 3 additional LP-8x4x built-in serial
ports.
The device can also host up to 8 extension cards with 4 serial ports
on each card for a total of 35 ports. However, I don't have
the hardware to test extension cards, so they are not supported, yet.
Signed-off-by: Sergei Ianovich <ynvich@...il.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
---
v3..v4
* move DTS bindings to a different patch (8/21) as suggested by
Heikki Krogerus
v2..v3
* no changes (except number 10/16 -> 12/21)
v0..v2
* register platform driver instead of platform device
* use device tree
* use devm helpers where possible
.../devicetree/bindings/serial/lp8x4x-serial.txt | 35 +++++
arch/arm/configs/lp8x4x_defconfig | 1 +
drivers/tty/serial/8250/8250_lp8x4x.c | 169 +++++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 12 ++
drivers/tty/serial/8250/Makefile | 1 +
5 files changed, 218 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/lp8x4x-serial.txt
create mode 100644 drivers/tty/serial/8250/8250_lp8x4x.c
diff --git a/Documentation/devicetree/bindings/serial/lp8x4x-serial.txt b/Documentation/devicetree/bindings/serial/lp8x4x-serial.txt
new file mode 100644
index 0000000..5f9a4c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/lp8x4x-serial.txt
@@ -0,0 +1,35 @@
+UART ports on ICP DAS LP-8x4x
+
+ICP DAS LP-8x4x contains three additional serial ports interfaced via
+Analog Devices ADM213EA chips in addition to 3 serial ports on PXA CPU.
+
+Required properties:
+- compatible : should be "icpdas,uart-lp8x4x"
+
+- reg : should provide 16 byte man IO memory region and 1 byte region for
+ termios
+
+- interrupts : should provide interrupt
+
+- interrupt-parent : should provide a link to interrupt controller either
+ explicitly or implicitly from a parent node
+
+Examples (from pxa27x-lp8x4x.dts):
+
+ uart@...0 {
+ compatible = "icpdas,uart-lp8x4x";
+ reg = <0x9050 0x10
+ 0x9030 0x02>;
+ interrupt-parent = <&fpgairg>;
+ interrupts = <13>;
+ status = "okay";
+ };
+
+ uart@...0 {
+ compatible = "icpdas,uart-lp8x4x";
+ reg = <0x9060 0x10
+ 0x9032 0x02>;
+ interrupt-parent = <&fpgairg>;
+ interrupts = <14>;
+ status = "okay";
+ };
diff --git a/arch/arm/configs/lp8x4x_defconfig b/arch/arm/configs/lp8x4x_defconfig
index 17a4e6f..9116ce1 100644
--- a/arch/arm/configs/lp8x4x_defconfig
+++ b/arch/arm/configs/lp8x4x_defconfig
@@ -112,6 +112,7 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_8250_LP8X4X=m
CONFIG_HW_RANDOM=y
CONFIG_I2C=m
# CONFIG_I2C_COMPAT is not set
diff --git a/drivers/tty/serial/8250/8250_lp8x4x.c b/drivers/tty/serial/8250/8250_lp8x4x.c
new file mode 100644
index 0000000..93e0f59
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_lp8x4x.c
@@ -0,0 +1,169 @@
+/* linux/drivers/tty/serial/8250/8250_lp8x4x.c
+ *
+ * Support for 16550A serial ports on ICP DAS LP-8x4x
+ *
+ * Copyright (C) 2013 Sergei Ianovich <ynvich@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+struct lp8x4x_serial_data {
+ int line;
+ void *ios_mem;
+};
+
+static void lp8x4x_serial_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int len;
+ unsigned int baud;
+ struct lp8x4x_serial_data *data = port->private_data;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ len = 7;
+ break;
+ case CS6:
+ len = 8;
+ break;
+ case CS7:
+ len = 9;
+ break;
+ default:
+ case CS8:
+ len = 10;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ len++;
+ if (termios->c_cflag & PARENB)
+ len++;
+ if (!(termios->c_cflag & PARODD))
+ len++;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ len++;
+#endif
+
+ len -= 9;
+ len &= 3;
+ len <<= 3;
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ switch (baud) {
+ case 2400:
+ len |= 1;
+ break;
+ case 4800:
+ len |= 2;
+ break;
+ case 19200:
+ len |= 4;
+ break;
+ case 38400:
+ len |= 5;
+ break;
+ case 57600:
+ len |= 6;
+ break;
+ case 115200:
+ len |= 7;
+ break;
+ case 9600:
+ default:
+ len |= 3;
+ break;
+ };
+ iowrite8(len, data->ios_mem);
+
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static struct of_device_id lp8x4x_serial_dt_ids[] = {
+ { .compatible = "icpdas,uart-lp8x4x", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lp8x4x_serial_dt_ids);
+
+static int lp8x4x_serial_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct lp8x4x_serial_data *data;
+ struct resource *mmres, *mires, *irqres;
+ int ret;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mires = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mmres || !mires || !irqres)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->ios_mem = devm_ioremap_resource(&pdev->dev, mires);
+ if (!data->ios_mem)
+ return -EFAULT;
+
+ uart.port.iotype = UPIO_MEM;
+ uart.port.mapbase = mmres->start;
+ uart.port.iobase = mmres->start;
+ uart.port.regshift = 1;
+ uart.port.irq = irqres->start;
+ uart.port.flags = UPF_IOREMAP;
+ uart.port.dev = &pdev->dev;
+ uart.port.uartclk = 14745600;
+ uart.port.set_termios = lp8x4x_serial_set_termios;
+ uart.port.private_data = data;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0)
+ return ret;
+
+ data->line = ret;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static int lp8x4x_serial_remove(struct platform_device *pdev)
+{
+ struct lp8x4x_serial_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+
+ return 0;
+}
+
+static struct platform_driver lp8x4x_serial_driver = {
+ .probe = lp8x4x_serial_probe,
+ .remove = lp8x4x_serial_remove,
+
+ .driver = {
+ .name = "uart-lp8x4x",
+ .owner = THIS_MODULE,
+ .of_match_table = lp8x4x_serial_dt_ids,
+ },
+};
+
+module_platform_driver(lp8x4x_serial_driver);
+
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_DESCRIPTION("8250 serial port module for LP-8x4x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 81bd7c9..9fb0fbb 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -311,3 +311,15 @@ config SERIAL_PXA
can enable its onboard serial ports by enabling this option.
If you choose M here, the module name will be 8250_pxa.
+
+config SERIAL_8250_LP8X4X
+ tristate "Support 16550A ports on ICP DAS LP-8x4x"
+ depends on OF && SERIAL_8250 && SERIAL_8250_MANY_PORTS && ARCH_PXA
+ select LP8X4X_IRQ
+ help
+ In addition to serial ports on PXA270 SoC, LP-8x4x has 1 dual
+ RS232/RS485 port, 1 RS485 port and 1 RS232 port.
+
+ Say N here, unless you plan to run this kernel on a LP-8x4x system.
+
+ If you choose M here, the module name will be 8250_lp8x4x.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index b7d1b61..7370bfb 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_LP8X4X) += 8250_lp8x4x.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists