linux-kernel - RE: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <B256D81BAE5131468A838E5D7A24364180A855DE@penmbx01>
Date:	Mon, 21 Apr 2014 03:08:34 +0000
From:	"Yang, Wenyou" <Wenyou.Yang@...el.com>
To:	"Ferre, Nicolas" <Nicolas.FERRE@...el.com>
CC:	"broonie@...nel.org" <broonie@...nel.org>,
	"lgirdwood@...il.com" <lgirdwood@...il.com>,
	"grant.likely@...aro.org" <grant.likely@...aro.org>,
	"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
	"plagnioj@...osoft.com" <plagnioj@...osoft.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device
 node

Hi Nicolas,

> -----Original Message-----
> From: Ferre, Nicolas
> Sent: Saturday, April 19, 2014 5:26 AM
> To: Yang, Wenyou
> Cc: broonie@...nel.org; lgirdwood@...il.com; grant.likely@...aro.org;
> rob.herring@...xeda.com; plagnioj@...osoft.com; linux-
> kernel@...r.kernel.org; devicetree@...r.kernel.org; linux-
> doc@...r.kernel.org; linux-arm-kernel@...ts.infradead.org
> Subject: Re: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator
> device node
> 
> On 24/12/2013 03:36, Wenyou Yang :
> > Reviwed-by: Mark Brown <broonie@...aro.org>
> > Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
> 
> Wenyou,
> 
> While collecting patches for our next at91-3.16-dt branch I noticed
> this patch that should go on top of the SAMA5D3 CMP board.
> 
> I would prefer to create another .dtsi file for CMP board and not mix
> with the current cpu module usual board that does not contain this
> regulator. But well we can do something even more simpler and move this
> PMIC example to the newer SAMA5D3 Xplained board.
> 
> So, will it be possible for you to re-send a new patch targeted to
> SAMA5D3 Xplained?
OK, I will re-send a new patch.

> 
> Thanks, bye.
> 
> 
> > ---
> >  arch/arm/boot/dts/sama5d3xcm.dtsi |   46
> +++++++++++++++++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi
> > b/arch/arm/boot/dts/sama5d3xcm.dtsi
> > index 726a0f3..3d4e5c2 100644
> > --- a/arch/arm/boot/dts/sama5d3xcm.dtsi
> > +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
> > @@ -38,6 +38,52 @@
> >  			macb0: ethernet@...28000 {
> >  				phy-mode = "rgmii";
> >  			};
> > +
> > +			i2c1: i2c@...18000 {
> > +				pmic: act8865@5b {
> > +					compatible = "active-semi,act8865";
> > +					reg = <0x5b>;
> > +					status = "disabled";
> > +
> > +					regulators {
> > +						vcc_1v8_reg: DCDC_REG1 {
> > +							regulator-name = "VCC_1V8";
> > +							regulator-min-microvolt =
> <1800000>;
> > +							regulator-max-microvolt =
> <1800000>;
> > +							regulator-always-on;
> > +						};
> > +
> > +						vcc_1v2_reg: DCDC_REG2 {
> > +							regulator-name = "VCC_1V2";
> > +							regulator-min-microvolt =
> <1100000>;
> > +							regulator-max-microvolt =
> <1300000>;
> > +							regulator-suspend-mem-
> microvolt = <1150000>;
> > +							regulator-suspend-standby-
> microvolt = <1150000>;
> > +							regulator-always-on;
> > +						};
> > +
> > +						vcc_3v3_reg: DCDC_REG3 {
> > +							regulator-name = "VCC_3V3";
> > +							regulator-min-microvolt =
> <3300000>;
> > +							regulator-max-microvolt =
> <3300000>;
> > +							regulator-always-on;
> > +						};
> > +
> > +						vddana_reg: LDO_REG1 {
> > +							regulator-name = "VDDANA";
> > +							regulator-min-microvolt =
> <3300000>;
> > +							regulator-max-microvolt =
> <3300000>;
> > +							regulator-always-on;
> > +						};
> > +
> > +						vddfuse_reg: LDO_REG2 {
> > +							regulator-name = "FUSE_2V5";
> > +							regulator-min-microvolt =
> <2500000>;
> > +							regulator-max-microvolt =
> <2500000>;
> > +						};
> > +					};
> > +				};
> > +			};
> >  		};
> >
> >  		nand0: nand@...00000 {
> >
> 
> 
> --
> Nicolas Ferre

Best Regards,
Wenyou Yang
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/