| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1398058244-14099-5-git-send-email-agross@codeaurora.org>
Date: Mon, 21 Apr 2014 00:30:44 -0500
From: Andy Gross <agross@...eaurora.org>
To: linux-kernel@...r.kernel.org
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
Santosh Shilimkar <santosh.shilimkar@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Gross <agross@...eaurora.org>
Subject: [PATCH 4/4] tty: serial: msm: Remove direct access to GSBI
This patch removes direct access of the GSBI registers. GSBI configuration
should be done through the GSBI driver directly.
Signed-off-by: Andy Gross <agross@...eaurora.org>
---
drivers/tty/serial/msm_serial.c | 48 ++-------------------------------------
drivers/tty/serial/msm_serial.h | 5 ----
2 files changed, 2 insertions(+), 51 deletions(-)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b5d779c..8901114 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -45,7 +45,6 @@ struct msm_port {
struct clk *clk;
struct clk *pclk;
unsigned int imr;
- void __iomem *gsbi_base;
int is_uartdm;
unsigned int old_snap_state;
};
@@ -586,9 +585,7 @@ static const char *msm_type(struct uart_port *port)
static void msm_release_port(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
- struct msm_port *msm_port = UART_TO_MSM(port);
struct resource *uart_resource;
- struct resource *gsbi_resource;
resource_size_t size;
uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -599,28 +596,12 @@ static void msm_release_port(struct uart_port *port)
release_mem_region(port->mapbase, size);
iounmap(port->membase);
port->membase = NULL;
-
- if (msm_port->gsbi_base) {
- writel_relaxed(GSBI_PROTOCOL_IDLE,
- msm_port->gsbi_base + GSBI_CONTROL);
-
- gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (unlikely(!gsbi_resource))
- return;
-
- size = resource_size(gsbi_resource);
- release_mem_region(gsbi_resource->start, size);
- iounmap(msm_port->gsbi_base);
- msm_port->gsbi_base = NULL;
- }
}
static int msm_request_port(struct uart_port *port)
{
- struct msm_port *msm_port = UART_TO_MSM(port);
struct platform_device *pdev = to_platform_device(port->dev);
struct resource *uart_resource;
- struct resource *gsbi_resource;
resource_size_t size;
int ret;
@@ -639,30 +620,8 @@ static int msm_request_port(struct uart_port *port)
goto fail_release_port;
}
- gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- /* Is this a GSBI-based port? */
- if (gsbi_resource) {
- size = resource_size(gsbi_resource);
-
- if (!request_mem_region(gsbi_resource->start, size,
- "msm_serial")) {
- ret = -EBUSY;
- goto fail_release_port_membase;
- }
-
- msm_port->gsbi_base = ioremap(gsbi_resource->start, size);
- if (!msm_port->gsbi_base) {
- ret = -EBUSY;
- goto fail_release_gsbi;
- }
- }
-
return 0;
-fail_release_gsbi:
- release_mem_region(gsbi_resource->start, size);
-fail_release_port_membase:
- iounmap(port->membase);
fail_release_port:
release_mem_region(port->mapbase, size);
return ret;
@@ -670,7 +629,6 @@ fail_release_port:
static void msm_config_port(struct uart_port *port, int flags)
{
- struct msm_port *msm_port = UART_TO_MSM(port);
int ret;
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_MSM;
@@ -678,9 +636,6 @@ static void msm_config_port(struct uart_port *port, int flags)
if (ret)
return;
}
- if (msm_port->gsbi_base)
- writel_relaxed(GSBI_PROTOCOL_UART,
- msm_port->gsbi_base + GSBI_CONTROL);
}
static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
@@ -976,6 +931,7 @@ static struct of_device_id msm_match_table[] = {
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
+ .probe = msm_serial_probe,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
@@ -991,7 +947,7 @@ static int __init msm_serial_init(void)
if (unlikely(ret))
return ret;
- ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+ ret = platform_driver_register(&msm_platform_driver);
if (unlikely(ret))
uart_unregister_driver(&msm_uart_driver);
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 469fda5..a77cc76 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -108,11 +108,6 @@
#define UART_ISR 0x0014
#define UART_ISR_TX_READY (1 << 7)
-#define GSBI_CONTROL 0x0
-#define GSBI_PROTOCOL_CODE 0x30
-#define GSBI_PROTOCOL_UART 0x40
-#define GSBI_PROTOCOL_IDLE 0x0
-
#define UARTDM_DMRX 0x34
#define UARTDM_NCF_TX 0x40
#define UARTDM_RX_TOTAL_SNAP 0x38
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists