[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1398182952.1593.20.camel@EMBLYSD005.adetelgroup.com>
Date: Tue, 22 Apr 2014 18:09:12 +0200
From: Hubert Chaumette <hchaumette@...neo-embedded.com>
To: Shawn Guo <shawn.guo@...aro.org>
Cc: linux-kernel@...r.kernel.org, kernel@...gutronix.de,
linux@....linux.org.uk, f.fainelli@...il.com,
linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org,
agust@...x.de
Subject: Re: [PATCH] ARM: i.MX6: Add OF configuration support for ksz9031
Le mercredi 16 avril 2014 à 16:03 +0800, Shawn Guo a écrit :
> On Mon, Apr 14, 2014 at 11:08:16AM +0200, Hubert Chaumette wrote:
> > - Adds support for ksz9031 PAD skew configuration over devicetree
> > - Removes hard-coded pad skew configuration for imx6q-sabrelite, now redundant
> > with arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >
> > Tested on congatec conga-QEVAL board with conga-QMX6 module.
> >
> > This patch is based on Anatolij Gustschin's patch from
> > http://www.spinics.net/lists/arm-kernel/msg319771.html
> >
> > Signed-off-by: Hubert Chaumette <hchaumette@...neo-embedded.com>
> > ---
> > arch/arm/mach-imx/mach-imx6q.c | 45 ----------
> > drivers/net/phy/micrel.c | 185 ++++++++++++++++++++++++++++++++++++++++-
>
> You should probably leave mach-imx6q.c unchanged, because dropping the
> phy fix-up from there may break old DTBs. And the changes on micrel.c
> should be submitted to net maintainer.
>
> Shawn
I've re-sent it without the changes to mach-imx6q.c. Thanks for your
review.
Regards,
Hubert
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists