| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 23 Apr 2014 14:04:40 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Mike Turquette <mturquette@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Tomasz Figa <t.figa@...sung.com>
Subject: Re: [PATCH v3 resend] clk: s2mps11: Add support for S2MPS14 clocks
Hi,
Mike, can you apply this patch? Actually you acked it already [1] but I
forgot to put it in the commit message.
The patch wasn't applied in that time because of multiple concurrent
changes in sec-core drivers.
[1]http://thread.gmane.org/gmane.linux.kernel.samsung-soc/28039/focus=310279
Best regards,
Krzysztof
On pon, 2014-04-14 at 09:55 +0200, Krzysztof Kozlowski wrote:
> This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
> s2mps11 clock driver.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
> Cc: Kyungmin Park <kyungmin.park@...sung.com>
> Reviewed-by: Yadwinder Singh Brar <yadi.brar@...sung.com>
> Reviewed-by: Tomasz Figa <t.figa@...sung.com>
> ---
> drivers/clk/Kconfig | 8 +++----
> drivers/clk/clk-s2mps11.c | 61 +++++++++++++++++++++++++++++++++++------------
> 2 files changed, 50 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 6f56d3a4f010..8f9ce8ba036d 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -65,12 +65,12 @@ config COMMON_CLK_SI570
> clock generators.
>
> config COMMON_CLK_S2MPS11
> - tristate "Clock driver for S2MPS11/S5M8767 MFD"
> + tristate "Clock driver for S2MPS1X/S5M8767 MFD"
> depends on MFD_SEC_CORE
> ---help---
> - This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
> - multi-function devices have 3 fixed-rate oscillators, clocked at
> - 32KHz each.
> + This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
> + clock. These multi-function devices have two (S2MPS14) or three
> + (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
>
> config CLK_TWL6040
> tristate "External McPDM functional clock from twl6040"
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index f2f62a1bf61a..b78eafeab038 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -1,7 +1,7 @@
> /*
> * clk-s2mps11.c - Clock driver for S2MPS11.
> *
> - * Copyright (C) 2013 Samsung Electornics
> + * Copyright (C) 2013,2014 Samsung Electornics
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the
> @@ -13,10 +13,6 @@
> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> * GNU General Public License for more details.
> *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> - *
> */
>
> #include <linux/module.h>
> @@ -27,6 +23,7 @@
> #include <linux/clk-provider.h>
> #include <linux/platform_device.h>
> #include <linux/mfd/samsung/s2mps11.h>
> +#include <linux/mfd/samsung/s2mps14.h>
> #include <linux/mfd/samsung/s5m8767.h>
> #include <linux/mfd/samsung/core.h>
>
> @@ -125,7 +122,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
> },
> };
>
> -static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
> +static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
> + [S2MPS11_CLK_AP] = {
> + .name = "s2mps14_ap",
> + .ops = &s2mps11_clk_ops,
> + .flags = CLK_IS_ROOT,
> + },
> + [S2MPS11_CLK_BT] = {
> + .name = "s2mps14_bt",
> + .ops = &s2mps11_clk_ops,
> + .flags = CLK_IS_ROOT,
> + },
> +};
> +
> +static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
> + struct clk_init_data *clks_init)
> {
> struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> struct device_node *clk_np;
> @@ -145,9 +156,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
> if (!clk_table)
> return ERR_PTR(-ENOMEM);
>
> - for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> + for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> + if (!clks_init[i].name)
> + continue; /* Skip clocks not present in some devices */
> of_property_read_string_index(clk_np, "clock-output-names", i,
> - &s2mps11_clks_init[i].name);
> + &clks_init[i].name);
> + }
>
> return clk_np;
> }
> @@ -158,6 +172,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
> struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
> struct device_node *clk_np = NULL;
> unsigned int s2mps11_reg;
> + struct clk_init_data *clks_init;
> int i, ret = 0;
> u32 val;
>
> @@ -168,25 +183,33 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>
> s2mps11_clk = s2mps11_clks;
>
> - clk_np = s2mps11_clk_parse_dt(pdev);
> - if (IS_ERR(clk_np))
> - return PTR_ERR(clk_np);
> -
> switch(platform_get_device_id(pdev)->driver_data) {
> case S2MPS11X:
> s2mps11_reg = S2MPS11_REG_RTC_CTRL;
> + clks_init = s2mps11_clks_init;
> + break;
> + case S2MPS14X:
> + s2mps11_reg = S2MPS14_REG_RTCCTRL;
> + clks_init = s2mps14_clks_init;
> break;
> case S5M8767X:
> s2mps11_reg = S5M8767_REG_CTRL1;
> + clks_init = s2mps11_clks_init;
> break;
> default:
> dev_err(&pdev->dev, "Invalid device type\n");
> return -EINVAL;
> };
>
> + clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
> + if (IS_ERR(clk_np))
> + return PTR_ERR(clk_np);
> +
> for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
> + if (!clks_init[i].name)
> + continue; /* Skip clocks not present in some devices */
> s2mps11_clk->iodev = iodev;
> - s2mps11_clk->hw.init = &s2mps11_clks_init[i];
> + s2mps11_clk->hw.init = &clks_init[i];
> s2mps11_clk->mask = 1 << i;
> s2mps11_clk->reg = s2mps11_reg;
>
> @@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
> }
>
> if (clk_table) {
> - for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> + for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> + /* Skip clocks not present on S2MPS14 */
> + if (!clks_init[i].name)
> + continue;
> clk_table[i] = s2mps11_clks[i].clk;
> + }
>
> clk_data.clks = clk_table;
> clk_data.clk_num = S2MPS11_CLKS_NUM;
> @@ -250,14 +277,18 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
> struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
> int i;
>
> - for (i = 0; i < S2MPS11_CLKS_NUM; i++)
> + for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
> + if (!s2mps11_clks[i].lookup)
> + continue; /* Skip clocks not present in some devices */
> clkdev_drop(s2mps11_clks[i].lookup);
> + }
>
> return 0;
> }
>
> static const struct platform_device_id s2mps11_clk_id[] = {
> { "s2mps11-clk", S2MPS11X},
> + { "s2mps14-clk", S2MPS14X},
> { "s5m8767-clk", S5M8767X},
> { },
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists