lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 23 Apr 2014 15:23:16 +0100
From:	Liviu Dudau <Liviu.Dudau@....com>
To:	Arnd Bergmann <arnd@...db.de>
Cc:	"linaro-kernel@...ts.linaro.org" <linaro-kernel@...ts.linaro.org>,
	Kukjin Kim <kgene.kim@...sung.com>,
	'Jingoo Han' <jg1.han@...sung.com>,
	'Byungho An' <bh74.an@...sung.com>,
	'linux-pci' <linux-pci@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"ilho215.lee@...sung.com" <ilho215.lee@...sung.com>,
	'Bjorn Helgaas' <bhelgaas@...gle.com>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [RFC PATCH 2/2] PCI: exynos: Add PCIe support for Samsung GH7 SoC

On Wed, Apr 23, 2014 at 12:03:47PM +0100, Arnd Bergmann wrote:
> On Wednesday 23 April 2014 18:19:30 Kukjin Kim wrote:
> > 
> 
> > Basically, ARMv8 based GH7 has same PCIe hardware IP with previous ARMv7
> > based exynos5440, several features in PCIe are different though. In other
> > words, basic functionalities for PCIe are same. So I think, would be nice if
> > we could use one PCIe device driver for both SoCs.
> 
> Ok, I see. I was just trying to get a feeling for how much is shared
> or SoC specific between your variants. If they are different enough,
> it may be easier to have two drivers.
> 
> > However, if we need to support the PCIe with each own device driver because
> > of difference of 32bit and 64bit, please kindly let us know. Honestly, I'm
> > not sure about that right now.
> 
> We are working already on ideas to minimize the differences between
> arm32 and arm64 PCI support, it will just take more work.
> 
> > > Also, if gh7 is expected to run a full firmware, I think you should
> > > do all the setup in the firmware before booting Linux, and just
> > > do the required run-time operations in the driver itself.
> > > 
> > Well, we're expecting that all the setup should be done by the device driver
> > in kernel not firmware.
> 
> Ok, just make sure this hardware never shows up in servers then.

Not necessarily, as long as the setup will always happen in the kernel?

> 
> Unfortunately we are in a tricky situation on arm64 because we have
> to support both server-type SoCs and embedded-type SoCs. In an
> embedded system, you can't trust the boot loader to do a proper
> setup of all the hardware, so the kernel needs full control over
> all the initialization. In a server, the initialization is the
> responsibility of the firmware, and we don't want the kernel to
> even know about those registers.
> 
> My hope is that all server chips use an SBSA compliant PCIe
> implementation, but we already have X-Gene, which is doing server
> workloads with a nonstandard PCIe, and it's possible that there
> will also be server-like systems with a DesignWare PCIe block
> instead of an SBSA compliant one. We can still support those, but
> I don't want to see more than one implementation of dw-pcie
> on servers. Just like we have the generic PCIe support that Will
> is doing for virtual machines and SBSA compliant systems, we
> would do one dw-pcie variant for all systems that come with a
> host firmware and rely on it being set up already.

There is nothing in the SBSA that mandates firmware setup. All it requires
is that hardware is setup in a way that is not specific to a board
or a particular OEM. Surely if the setup being done for GH7 is always
the same it should fit the bill?

Kind regards,
Liviu


> 
> 	Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ