| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1398264806-2082-1-git-send-email-sthokal@xilinx.com>
Date: Wed, 23 Apr 2014 20:23:25 +0530
From: Srikanth Thokala <sthokal@...inx.com>
To: dan.j.williams@...el.com, vinod.koul@...el.com, michals@...inx.com,
grant.likely@...aro.org, robh+dt@...nel.org
Cc: levex@...ux.com, lars@...afoo.de,
andriy.shevchenko@...ux.intel.com, dmaengine@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Srikanth Thokala <sthokal@...inx.com>
Subject: [PATCH v8 1/2] dma: Add Xilinx Video DMA DT Binding Documentation
Device-tree binding documentation of Xilinx Video DMA Engine
Signed-off-by: Srikanth Thokala <sthokal@...inx.com>
Acked-by: Rob Herring <robh@...nel.org>
---
Changes in v8:
Fixed typos as suggested by Rob, Thanks.
Changes in v7:
None
Changes in v6:
None
Changes in v5:
None
Changes in v4:
None
Changes in v3:
None
Changes in v2:
- Removed device-id DT property, as suggested by Arnd Bergmann
- Properly documented DT bindings as suggested by Arnd Bergmann
---
.../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 75 ++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
new file mode 100644
index 0000000..264100c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -0,0 +1,75 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+- dma-channel child node: Should have at least one channel and can have up to
+ two channels per device. This node specifies the properties of each
+ DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells configured for Scatter-mode in
+ the hardware.
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+ It takes following values:
+ {1}, flush both channels
+ {2}, flush mm2s channel
+ {3}, flush s2mm channel
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
+ "xlnx,axi-vdma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,data-width: Should contain the stream data width, take values
+ {32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+ Realignment Engine.
+- xlnx,genlock-mode: Tells Genlock synchronization is
+ enabled/disabled in hardware.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@...30000 {
+ compatible = "xlnx,axi-vdma-1.00.a";
+ #dma_cells = <1>;
+ reg = < 0x40030000 0x10000 >;
+ xlnx,num-fstores = <0x8>;
+ xlnx,flush-fsync = <0x1>;
+ dma-channel@...30000 {
+ compatible = "xlnx,axi-vdma-mm2s-channel";
+ interrupts = < 0 54 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+ dma-channel@...30030 {
+ compatible = "xlnx,axi-vdma-s2mm-channel";
+ interrupts = < 0 53 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+ where Channel ID is '0' for write/tx and '1' for read/rx
+ channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+ compatible ="xlnx,axi-vdma-test-1.00.a";
+ dmas = <&axi_vdma_0 0
+ &axi_vdma_0 1>;
+ dma-names = "vdma0", "vdma1";
+} ;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists