linux-kernel - [PATCH 10/13] tty: serial: omap: remove some dead code

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1398265117-11793-10-git-send-email-balbi@ti.com>
Date:	Wed, 23 Apr 2014 09:58:34 -0500
From:	Felipe Balbi <balbi@...com>
To:	Greg KH <gregkh@...uxfoundation.org>
CC:	<marcel@...tmann.org>, <gustavo@...ovan.org>,
	<johan.hedberg@...il.com>, <jslaby@...e.cz>,
	<grant.likely@...aro.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	<linux-bluetooth@...r.kernel.org>, <linux-serial@...r.kernel.org>,
	<devicetree@...r.kernel.org>,
	Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
	Tony Lindgren <tony@...mide.com>, Felipe Balbi <balbi@...com>
Subject: [PATCH 10/13] tty: serial: omap: remove some dead code

nobody passes a DTR_gpio to this driver, so
this code is not necessary.

Signed-off-by: Felipe Balbi <balbi@...com>
---
 drivers/tty/serial/omap-serial.c | 39 ---------------------------------------
 1 file changed, 39 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index b46aaf3..6654682 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -163,10 +163,6 @@ struct uart_omap_port {
 	u8			wakeups_enabled;
 	u32			features;
 
-	int			DTR_gpio;
-	int			DTR_inverted;
-	int			DTR_active;
-
 	struct serial_rs485	rs485;
 	int			rts_gpio;
 
@@ -694,16 +690,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	serial_out(up, UART_MCR, up->mcr);
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
-
-	if (gpio_is_valid(up->DTR_gpio) &&
-	    !!(mctrl & TIOCM_DTR) != up->DTR_active) {
-		up->DTR_active = !up->DTR_active;
-		if (gpio_cansleep(up->DTR_gpio))
-			schedule_work(&up->qos_work);
-		else
-			gpio_set_value(up->DTR_gpio,
-				       up->DTR_active != up->DTR_inverted);
-	}
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -847,9 +833,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
 						qos_work);
 
 	pm_qos_update_request(&up->pm_qos_request, up->latency);
-	if (gpio_is_valid(up->DTR_gpio))
-		gpio_set_value_cansleep(up->DTR_gpio,
-					up->DTR_active != up->DTR_inverted);
 }
 
 static void
@@ -1672,28 +1655,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		ret = devm_gpio_request(&pdev->dev, omap_up_info->DTR_gpio,
-				"omap-serial");
-		if (ret < 0)
-			return ret;
-		ret = gpio_direction_output(omap_up_info->DTR_gpio,
-					    omap_up_info->DTR_inverted);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
-	    omap_up_info->DTR_present) {
-		up->DTR_gpio = omap_up_info->DTR_gpio;
-		up->DTR_inverted = omap_up_info->DTR_inverted;
-	} else {
-		up->DTR_gpio = -EINVAL;
-	}
-
-	up->DTR_active = 0;
-
 	up->dev = &pdev->dev;
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
-- 
1.9.2.459.g68773ac

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/