linux-kernel - Re: [PATCH 10/13] tty: serial: omap: remove some dead code

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140423152623.GJ9593@saruman.home>
Date:	Wed, 23 Apr 2014 10:26:23 -0500
From:	Felipe Balbi <balbi@...com>
To:	Felipe Balbi <balbi@...com>
CC:	Greg KH <gregkh@...uxfoundation.org>, <marcel@...tmann.org>,
	<gustavo@...ovan.org>, <johan.hedberg@...il.com>, <jslaby@...e.cz>,
	<grant.likely@...aro.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	<linux-bluetooth@...r.kernel.org>, <linux-serial@...r.kernel.org>,
	<devicetree@...r.kernel.org>,
	Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
	Tony Lindgren <tony@...mide.com>, NeilBrown <neilb@...e.de>
Subject: Re: [PATCH 10/13] tty: serial: omap: remove some dead code

+Neil

On Wed, Apr 23, 2014 at 09:58:34AM -0500, Felipe Balbi wrote:
> nobody passes a DTR_gpio to this driver, so
> this code is not necessary.
> 
> Signed-off-by: Felipe Balbi <balbi@...com>
> ---
>  drivers/tty/serial/omap-serial.c | 39 ---------------------------------------
>  1 file changed, 39 deletions(-)
> 
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index b46aaf3..6654682 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -163,10 +163,6 @@ struct uart_omap_port {
>  	u8			wakeups_enabled;
>  	u32			features;
>  
> -	int			DTR_gpio;
> -	int			DTR_inverted;
> -	int			DTR_active;
> -
>  	struct serial_rs485	rs485;
>  	int			rts_gpio;
>  
> @@ -694,16 +690,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
>  	serial_out(up, UART_MCR, up->mcr);
>  	pm_runtime_mark_last_busy(up->dev);
>  	pm_runtime_put_autosuspend(up->dev);
> -
> -	if (gpio_is_valid(up->DTR_gpio) &&
> -	    !!(mctrl & TIOCM_DTR) != up->DTR_active) {
> -		up->DTR_active = !up->DTR_active;
> -		if (gpio_cansleep(up->DTR_gpio))
> -			schedule_work(&up->qos_work);
> -		else
> -			gpio_set_value(up->DTR_gpio,
> -				       up->DTR_active != up->DTR_inverted);
> -	}
>  }
>  
>  static void serial_omap_break_ctl(struct uart_port *port, int break_state)
> @@ -847,9 +833,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
>  						qos_work);
>  
>  	pm_qos_update_request(&up->pm_qos_request, up->latency);
> -	if (gpio_is_valid(up->DTR_gpio))
> -		gpio_set_value_cansleep(up->DTR_gpio,
> -					up->DTR_active != up->DTR_inverted);
>  }
>  
>  static void
> @@ -1672,28 +1655,6 @@ static int serial_omap_probe(struct platform_device *pdev)
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
>  
> -	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
> -	    omap_up_info->DTR_present) {
> -		ret = devm_gpio_request(&pdev->dev, omap_up_info->DTR_gpio,
> -				"omap-serial");
> -		if (ret < 0)
> -			return ret;
> -		ret = gpio_direction_output(omap_up_info->DTR_gpio,
> -					    omap_up_info->DTR_inverted);
> -		if (ret < 0)
> -			return ret;
> -	}
> -
> -	if (gpio_is_valid(omap_up_info->DTR_gpio) &&
> -	    omap_up_info->DTR_present) {
> -		up->DTR_gpio = omap_up_info->DTR_gpio;
> -		up->DTR_inverted = omap_up_info->DTR_inverted;
> -	} else {
> -		up->DTR_gpio = -EINVAL;
> -	}
> -
> -	up->DTR_active = 0;
> -
>  	up->dev = &pdev->dev;
>  	up->port.dev = &pdev->dev;
>  	up->port.type = PORT_OMAP;
> -- 
> 1.9.2.459.g68773ac
> 

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)