linux-kernel - Re: [PATCH 4/5] KVM: x86: RSI/RDI/RCX are zero-extended when affected by string ops

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140423195832.GA32528@amt.cnet>
Date:	Wed, 23 Apr 2014 16:58:32 -0300
From:	Marcelo Tosatti <mtosatti@...hat.com>
To:	Nadav Amit <nadav.amit@...il.com>
Cc:	Gleb Natapov <gleb@...nel.org>,
	Nadav Amit <namit@...technion.ac.il>, pbonzini@...hat.com,
	tglx@...utronix.de, mingo@...hat.com, hpa@...or.com,
	x86@...nel.org, kvm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/5] KVM: x86: RSI/RDI/RCX are zero-extended when
 affected by string ops

On Tue, Apr 22, 2014 at 09:04:45AM +0300, Nadav Amit wrote:
> Gleb,
> 
> On 4/20/14, 12:26 PM, Gleb Natapov wrote:
> >On Fri, Apr 18, 2014 at 07:11:33AM +0300, Nadav Amit wrote:
> >>When using address-size override prefix with string instructions in long-mode,
> >>ESI/EDI/ECX are zero extended if they are affected by the instruction
> >>(incremented/decremented).  Currently, the KVM emulator does not do so.
> >>
> >>In addition, although it is not well-documented, when address override prefix
> >>is used with REP-string instruction, RCX high half is zeroed even if ECX was
> >>zero on the first iteration. Therefore, the emulator should clear the upper
> >>part of RCX in this case, as x86 CPUs do.
> >>
> >>Signed-off-by: Nadav Amit <namit@...technion.ac.il>
> >>---
> >>:100644 100644 69e2636... a69ed67... M	arch/x86/kvm/emulate.c
> >>  arch/x86/kvm/emulate.c |    4 ++++
> >>  1 file changed, 4 insertions(+)
> >>
> >>diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> >>index 69e2636..a69ed67 100644
> >>--- a/arch/x86/kvm/emulate.c
> >>+++ b/arch/x86/kvm/emulate.c
> >>@@ -491,6 +491,8 @@ register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, in
> >>  	else
> >>  		mask = ad_mask(ctxt);
> >>  	masked_increment(reg, mask, inc);
> >>+	if (ctxt->ad_bytes == 4)
> >>+		*reg &= 0xffffffff;
> >*reg=(u32)*reg; and you can do it inside else part.
> >
> >register_address_increment() is used also by jmp_rel and loop instructions,
> >is this correct for both of those too? Probably yes.
> >
> It appears to be so.
> Results of 32-bit operations are implicitly zero extended to 64-bit
> values, and this appears to apply to all 32 bit operations,
> including implicit ones. Therefore it seems to apply to all these
> operations.
> 
> >>  }
> >>
> >>  static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc)
> >>@@ -4567,6 +4569,8 @@ int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
> >>  	if (ctxt->rep_prefix && (ctxt->d & String)) {
> >>  		/* All REP prefixes have the same first termination condition */
> >>  		if (address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) == 0) {
> >>+			if (ctxt->ad_bytes == 4)
> >>+				*reg_write(ctxt, VCPU_REGS_RCX) = 0;
> >Does zero extension happens even if ECX was zero at the beginning on an instruction or only during
> >ECX modification. If later it is already covered in register_address_increment, no?
> The observed behaviour of the Sandy-Bridge I use, is that even if
> ECX is zero on the first iteration, the high half of RCX is zeroed.
> Therefore, this is a different case, which was not covered in
> register_address_increment. I agree it is totally undocumented.
> Following your previous comment - I may have missed the case in
> which loop instruction is executed with ECX = 0 while RCX != 0 and
> the address size is 32 bit. I will test this case soon (yet, it is
> lower on my priority list).

In 64-bit mode, the operand size for all near branches (CALL, RET, JCC,
JCXZ, JMP, and LOOP) is forced to 64 bits.

These instructions update the 64-bit RIP without the need for a REX
operand-size prefix.

The following aspects of near branches are controlled by the effective
operand size:
• Truncation of the size of the instruction pointer
...

In 64-bit mode, all of the above actions are forced to 64 bits
regardless of operand size prefixes (operand size
prefixes are silently ignored). However, the displacement field for
relative branches is still limited to 32 bits and the
address size for near branches is not forced in 64-bit mode.
Address sizes affect the size of RCX used for JCXZ and LOOP; they also
impact the address calculation for memory
indirect branches. Such addresses are 64 bits by default; but they can
be overridden to 32 bits by an address size
prefix.

So it seems your patch incorrectly handles "rex call" for example.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/