| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 24 Apr 2014 09:49:44 +0100
From: Luis Henriques <luis.henriques@...onical.com>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org,
kernel-team@...ts.ubuntu.com
Cc: Dennis Dalessandro <dennis.dalessandro@...el.com>,
Roland Dreier <roland@...estorage.com>,
Luis Henriques <luis.henriques@...onical.com>
Subject: [PATCH 3.11 059/182] IB/ipath: Fix potential buffer overrun in sending diag packet routine
3.11.10.9 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dennis Dalessandro <dennis.dalessandro@...el.com>
commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream.
Guard against a potential buffer overrun. The size to read from the
user is passed in, and due to the padding that needs to be taken into
account, as well as the place holder for the ICRC it is possible to
overflow the 32bit value which would cause more data to be copied from
user space than is allocated in the buffer.
Reported-by: Nico Golde <nico@...lde.de>
Reported-by: Fabian Yamaguchi <fabs@...sec.de>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@...el.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@...el.com>
Signed-off-by: Roland Dreier <roland@...estorage.com>
Signed-off-by: Luis Henriques <luis.henriques@...onical.com>
---
drivers/infiniband/hw/ipath/ipath_diag.c | 66 ++++++++++++--------------------
1 file changed, 25 insertions(+), 41 deletions(-)
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 714293b..e2f9a51 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -326,7 +326,7 @@ static ssize_t ipath_diagpkt_write(struct file *fp,
size_t count, loff_t *off)
{
u32 __iomem *piobuf;
- u32 plen, clen, pbufn;
+ u32 plen, pbufn, maxlen_reserve;
struct ipath_diag_pkt odp;
struct ipath_diag_xpkt dp;
u32 *tmpbuf = NULL;
@@ -335,51 +335,29 @@ static ssize_t ipath_diagpkt_write(struct file *fp,
u64 val;
u32 l_state, lt_state; /* LinkState, LinkTrainingState */
- if (count < sizeof(odp)) {
- ret = -EINVAL;
- goto bail;
- }
if (count == sizeof(dp)) {
if (copy_from_user(&dp, data, sizeof(dp))) {
ret = -EFAULT;
goto bail;
}
- } else if (copy_from_user(&odp, data, sizeof(odp))) {
- ret = -EFAULT;
+ } else if (count == sizeof(odp)) {
+ if (copy_from_user(&odp, data, sizeof(odp))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ } else {
+ ret = -EINVAL;
goto bail;
}
- /*
- * Due to padding/alignment issues (lessened with new struct)
- * the old and new structs are the same length. We need to
- * disambiguate them, which we can do because odp.len has never
- * been less than the total of LRH+BTH+DETH so far, while
- * dp.unit (same offset) unit is unlikely to get that high.
- * Similarly, dp.data, the pointer to user at the same offset
- * as odp.unit, is almost certainly at least one (512byte)page
- * "above" NULL. The if-block below can be omitted if compatibility
- * between a new driver and older diagnostic code is unimportant.
- * compatibility the other direction (new diags, old driver) is
- * handled in the diagnostic code, with a warning.
- */
- if (dp.unit >= 20 && dp.data < 512) {
- /* very probable version mismatch. Fix it up */
- memcpy(&odp, &dp, sizeof(odp));
- /* We got a legacy dp, copy elements to dp */
- dp.unit = odp.unit;
- dp.data = odp.data;
- dp.len = odp.len;
- dp.pbc_wd = 0; /* Indicate we need to compute PBC wd */
- }
-
/* send count must be an exact number of dwords */
if (dp.len & 3) {
ret = -EINVAL;
goto bail;
}
- clen = dp.len >> 2;
+ plen = dp.len >> 2;
dd = ipath_lookup(dp.unit);
if (!dd || !(dd->ipath_flags & IPATH_PRESENT) ||
@@ -422,16 +400,22 @@ static ssize_t ipath_diagpkt_write(struct file *fp,
goto bail;
}
- /* need total length before first word written */
- /* +1 word is for the qword padding */
- plen = sizeof(u32) + dp.len;
-
- if ((plen + 4) > dd->ipath_ibmaxlen) {
+ /*
+ * need total length before first word written, plus 2 Dwords. One Dword
+ * is for padding so we get the full user data when not aligned on
+ * a word boundary. The other Dword is to make sure we have room for the
+ * ICRC which gets tacked on later.
+ */
+ maxlen_reserve = 2 * sizeof(u32);
+ if (dp.len > dd->ipath_ibmaxlen - maxlen_reserve) {
ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n",
- plen - 4, dd->ipath_ibmaxlen);
+ dp.len, dd->ipath_ibmaxlen);
ret = -EINVAL;
- goto bail; /* before writing pbc */
+ goto bail;
}
+
+ plen = sizeof(u32) + dp.len;
+
tmpbuf = vmalloc(plen);
if (!tmpbuf) {
dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, "
@@ -473,11 +457,11 @@ static ssize_t ipath_diagpkt_write(struct file *fp,
*/
if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, tmpbuf, clen - 1);
+ __iowrite32_copy(piobuf + 2, tmpbuf, plen - 1);
ipath_flush_wc();
- __raw_writel(tmpbuf[clen - 1], piobuf + clen + 1);
+ __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
} else
- __iowrite32_copy(piobuf + 2, tmpbuf, clen);
+ __iowrite32_copy(piobuf + 2, tmpbuf, plen);
ipath_flush_wc();
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists