| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1398388572-30239-8-git-send-email-cw00.choi@samsung.com>
Date: Fri, 25 Apr 2014 10:16:12 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: kgene.kim@...sung.com, t.figa@...sung.com
Cc: linux-kernel@...r.kernel.org, linux@....linux.org.uk,
ben-linux@...ff.org, arnd@...db.de, olof@...om.net,
marc.zyngier@....com, thomas.abraham@...aro.org,
kyungmin.park@...sung.com, cw00.choi@...sung.com,
inki.dae@...sung.com, sw0312.kim@...sung.com,
hyunhee.kim@...sung.com, yj44.cho@...sung.com,
chanho61.park@...sung.com, sajjan.linux@...il.com,
tushar.behera@...aro.org, sachin.kamat@...aro.org,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Jaehoon Chung <jh80.chung@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250
From: Tomasz Figa <t.figa@...sung.com>
This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7
dual core and includes following dt nodes:
- GIC interrupt controller
- Pinctrl to control GPIOs
- Clock controller
- CPU information (Cortex-A7 dual core)
- UART to support serial port
- MCT (Multi Core Timer)
- ADC (Analog Digital Converter)
- I2C/SPI bus
- Power domain
- PMU (Performance Monitoring Unit)
- MSHC (Mobile Storage Host Controller)
- PWM (Pluse Width Modulation)
- AMBA bus
Signed-off-by: Tomasz Figa <t.figa@...sung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
Signed-off-by: Inki Dae <inki.dae@...sung.com>
Signed-off-by: Hyunhee Kim <hyunhee.kim@...sung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@...sung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Cc: Ben Dooks <ben-linux@...ff.org>
Cc: Kukjin Kim <kgene.kim@...sung.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Cc: Kumar Gala <galak@...eaurora.org>
Cc: Russell King <linux@....linux.org.uk>
Cc: devicetree@...r.kernel.org
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++
arch/arm/boot/dts/exynos3250.dtsi | 405 +++++++++++++
arch/arm/boot/dts/exynos4212-tizenw.dts | 926 ++++++++++++++++++++++++++++++
3 files changed, 1808 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
new file mode 100644
index 0000000..976490b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -0,0 +1,477 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl@...00000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpc1-3", "gpc1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ mipi0_clk: mipi0-clk {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@...00000 {
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpe2: gpe2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpk0: gpk0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk1: gpk1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk2: gpk2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl0: gpl0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm0: gpm0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm1: gpm1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm2: gpm2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm3: gpm3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm4: gpm4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+ <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+ <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpk0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpk1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpk1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpk1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpk1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_io: cam-port-b-io {
+ samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+ "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_b_clk_active: cam-port-b-clk-active {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_clk_idle: cam-port-b-clk-idle {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_i2c0: fimc-is-i2c0 {
+ samsung,pins = "gpm4-0", "gpm4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_i2c1: fimc-is-i2c1 {
+ samsung,pins = "gpm4-2", "gpm4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_uart: fimc-is-uart {
+ samsung,pins = "gpm3-5", "gpm3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
new file mode 100644
index 0000000..5be3dd3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -0,0 +1,405 @@
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "exynos3250-pinctrl.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+
+/ {
+ compatible = "samsung,exynos3250";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ mshc0 = &mshc_0;
+ mshc1 = &mshc_1;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ fixed-rate-clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xusbxti: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xusbxti";
+ };
+
+ xxti: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xxti";
+ };
+
+ xtcxo: clock@2 {
+ compatible = "fixed-clock";
+ reg = <2>;
+ clock-frequency = <0>;
+ #clock-cells = <0>;
+ clock-output-names = "xtcxo";
+ };
+ };
+
+ chipid@...00000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ sys_reg: syscon@...10000 {
+ compatible = "samsung,exynos3-sysreg", "syscon";
+ reg = <0x10010000 0x400>;
+ };
+
+ pd_cam: cam-power-domain@...23C00 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@...23C40 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C40 0x20>;
+ };
+
+ pd_g3d: g3d-power-domain@...23C60 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C60 0x20>;
+ };
+
+ pd_lcd0: lcd0-power-domain@...23C80 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C80 0x20>;
+ };
+
+ pd_isp: isp-power-domain@...23CA0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023CA0 0x20>;
+ };
+
+ cmu: clock-controller@...30000 {
+ compatible = "samsung,exynos3250-cmu";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+ rtc@...70000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 73 0>, <0 74 0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@...81000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ mct@...50000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+ <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+ };
+
+ pinctrl_1: pinctrl@...00000 {
+ compatible = "samsung,exynos3250-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 225 0>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 0>;
+ };
+ };
+
+ pinctrl_0: pinctrl@...00000 {
+ compatible = "samsung,exynos3250-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 240 0>;
+ };
+
+ mshc_0: mshc@...10000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12510000 0x1000>;
+ interrupts = <0 142 0>;
+ clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mshc_1: mshc@...20000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12520000 0x1000>;
+ interrupts = <0 143 0>;
+ clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@...80000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <0 138 0>;
+ clocks = <&cmu CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@...90000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <0 139 0>;
+ clocks = <&cmu CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ adc: adc@...C0000 {
+ compatible = "samsung,exynos-adc-v3";
+ reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+ interrupts = <0 137 0>;
+ clock-names = "adc", "sclk_tsadc";
+ clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
+ serial@...00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 109 0>;
+ clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial@...10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13810000 0x100>;
+ interrupts = <0 110 0>;
+ clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ i2c_0: i2c@...60000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <0 113 0>;
+ clocks = <&cmu CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+ status = "disabled";
+ };
+
+ i2c_1: i2c@...70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <0 114 0>;
+ clocks = <&cmu CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+ status = "disabled";
+ };
+
+ i2c_2: i2c@...80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <0 115 0>;
+ clocks = <&cmu CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+ status = "disabled";
+ };
+
+ i2c_3: i2c@...90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <0 116 0>;
+ clocks = <&cmu CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+ status = "disabled";
+ };
+
+ i2c_4: i2c@...A0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138A0000 0x100>;
+ interrupts = <0 117 0>;
+ clocks = <&cmu CLK_I2C4>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
+ status = "disabled";
+ };
+
+ i2c_5: i2c@...B0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138B0000 0x100>;
+ interrupts = <0 118 0>;
+ clocks = <&cmu CLK_I2C5>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
+ status = "disabled";
+ };
+
+ i2c_6: i2c@...C0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138C0000 0x100>;
+ interrupts = <0 119 0>;
+ clocks = <&cmu CLK_I2C6>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
+ status = "disabled";
+ };
+
+ i2c_7: i2c@...D0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138D0000 0x100>;
+ interrupts = <0 120 0>;
+ clocks = <&cmu CLK_I2C7>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
+ status = "disabled";
+ };
+
+ spi_0: spi@...20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13920000 0x100>;
+ interrupts = <0 121 0>;
+ dmas = <&pdma0 7>, <&pdma0 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ status = "disabled";
+ };
+
+ spi_1: spi@...30000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13930000 0x100>;
+ interrupts = <0 122 0>;
+ dmas = <&pdma1 7>, <&pdma1 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ status = "disabled";
+ };
+
+ pwm: pwm@...D0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x139D0000 0x1000>;
+ interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+ <0 107 0>, <0 108 0>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <0 18 0>, <0 19 0>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4212-tizenw.dts b/arch/arm/boot/dts/exynos4212-tizenw.dts
new file mode 100644
index 0000000..aed7060
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tizenw.dts
@@ -0,0 +1,926 @@
+/*
+ * Samsung's Exynos4212 based Tizen-W board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Tizen-W board which is based on
+ * Samsung's Exynos4212 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4212.dtsi"
+
+/ {
+ model = "Samsung Tizen-W board based on Exynos4212";
+ compatible = "samsung,tizen-w";
+
+ aliases {
+ /* 15...16 reserved for i2c0_isp, i2c1_isp */
+ i2c16 = &i2c1_isp;
+ };
+
+ memory {
+ reg = <0x40000000 0x08000000
+ 0x48000000 0x08000000
+ 0x50000000 0x08000000
+ 0x58000000 0x07F00000>;
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ contig_mem: region@...00000 {
+ compatible = "linux,contiguous-memory-region";
+ reg = <0x48000000 0x1000000>;
+ linux,default-contiguous-region;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ };
+
+ pinctrl@...00000 {
+ cam-port-b-clk-active {
+ samsung,pin-drv = <2>;
+ };
+ };
+
+ firmware@...4F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0204F000 0x1000>;
+ };
+
+ vemmc_reg: voltage-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ rtc@...70000 {
+ status = "okay";
+ };
+
+ mshc@...50000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ non-removable;
+ caps-mmc-erase;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ clocks = <&clock 301>, <&clock 149>;
+ clock-names = "biu", "ciu";
+ vmmc-supply = <&vemmc_reg>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <0>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ adc: adc@...C0000 {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+
+ ncp15wb473@0 {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>; /* VCC_1.8V_AP */
+ pullup-ohm = <100000>; /* 100K */
+ pulldown-ohm = <100000>; /* 100K */
+ io-channels = <&adc 1>; /* AP temperature */
+ };
+
+ ncp15wb473@1 {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>; /* VCC_1.8V_AP */
+ pullup-ohm = <100000>; /* 100K */
+ pulldown-ohm = <100000>; /* 100K */
+ io-channels = <&adc 2>; /* Battery temperature */
+ };
+ };
+
+ serial@...00000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data &uart0_fctl>;
+ status = "okay";
+ };
+
+ serial@...10000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>;
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ cpufreq {
+ freq_table = <0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF 0xFFFFFFFF 800000 700000 600000
+ 500000 400000 300000 200000 100000>;
+ vdd_arm-supply = <&buck2_reg>;
+ status = "okay";
+ };
+
+ busfreq {
+ compatible = "samsung,exynos4x12-busfreq";
+ vdd_int-supply = <&buck3_reg>;
+ vdd_mif-supply = <&buck1_reg>;
+ user-max-freq = <133000>;
+ status = "okay";
+ };
+
+ gpio-keys@0 {
+ compatible = "gpio-keys";
+
+ key@116 {
+ interrupt-parent = <&gpx2>;
+ interrupts = <7 0>;
+ gpios = <&gpx2 7 1>;
+ linux,code = <116>;
+ label = "power";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ haptic {
+ compatible = "linux,regulator-haptic";
+ haptic-supply = <&ldo20_reg>;
+ min-microvolt = <1100000>;
+ max-microvolt = <2000000>;
+ };
+
+ sec_reboot@ {
+ compatible = "samsung,sec-reboot";
+ power-gpio = <&gpx2 7 0>;
+ extcon = <&muic>;
+ };
+
+ charger-manager@ {
+ compatible = "charger-manager";
+
+ psy-name = "battery";
+
+ polling-mode = <1>; /* Polling external power */
+ polling-interval-ms = <30000>; /* Polling period */
+
+ fullbatt-uV = <4300>;
+ fullbatt-soc = <100>;
+ fullbatt-full-capacity = <0>;
+ fullbatt-vchkdrop-ms = <30000>;
+ fullbatt-vchkdrop-uV = <500>;
+
+ battery-present = <3>; /* CM_CHARGER_STAT */
+
+ charging-max-duration-minute = <360>;
+ discharging-max-duration-minute = <90>;
+
+ psy-fuelgauge-name = "max17040";
+
+ measure-battery-temp;
+ measure-battery-temp-type = <2>; /* Read temp from hwmon */
+
+ io-channels = <&adc 2>;
+ iio-adc-overheat = <2500>;
+ iio-adc-cold = <0>;
+
+ hwmon-name = "ncp15wb473.13"; /* Battery temperature*/
+ hwmon-property = "temp1_input";
+ hwmon-milli-centigrade-overheat = <45000>;
+ hwmon-milli-centigrade-cold = <5000>; /* minus value */
+ vinchg1-supply = <&charger_reg>;
+
+ psy-chargers {
+ psy-charger-max14577 {
+ psy-charger-name = "max14577-charger";
+ };
+ };
+
+ charger-regulators {
+ charger-vinchg1 {
+ regulator-name = "vinchg1";
+ charger-cables {
+ cable-USB {
+ cable-name = "USB";
+ extcon-name = "max14577-muic";
+ min-current-uA = <475000>;
+ max-current-uA = <500000>;
+ };
+
+ cable-TA {
+ cable-name = "TA";
+ extcon-name = "max14577-muic";
+ min-current-uA = <475000>;
+ max-current-uA = <500000>;
+ };
+ };
+ };
+ };
+ };
+
+ i2c@...70000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c1_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ fuel-gauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 8>;
+ };
+ };
+
+ i2c@...80000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c2_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ max14577@25 {
+ compatible = "maxim,max14577";
+ reg = <0x25>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+
+ muic: max14577-muic {
+ compatible = "maxim,max14577-muic";
+ };
+ regulators {
+ compatible = "maxim,max14577-regulator";
+ safeout_reg: SAFEOUT@1 {
+ regulator-name = "SAFEOUT";
+ };
+ charger_reg: CHARGER@0 {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <90000>;
+ regulator-max-microamp = <950000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+ i2c@...90000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touchscreen-mms128@48 {
+ compatible = "melfas,mms128";
+ reg = <0x48>;
+ interrupt-parent = <&gpm2>;
+ interrupts = <3 2>;
+ max_x = <320>;
+ max_y = <320>;
+ invert_x = <0>;
+ invert_y = <0>;
+ gpios = <&gpm2 3 2>,
+ <&gpa1 2 0>,
+ <&gpa1 3 0>;
+ tsp_vendor = "MELFAS";
+ tsp_ic = "MMS128S";
+ tsp_tx = <7>;
+ tsp_rx = <7>;
+ config_fw_version = "V700_ME_0910";
+ tsp_avdd_3.3v-supply = <&ldo21_reg>;
+ tsp_vdd_1.8v-supply = <&ldo25_reg>;
+ };
+ };
+
+ i2c@...D0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c7_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-ramp-enable;
+ s5m8767,pmic-buck3-ramp-enable;
+ s5m8767,pmic-buck4-ramp-enable;
+ s5m8767,pmic-buck-ramp-delay = <25>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpf0 5 0>,
+ <&gpx2 0 0>,
+ <&gpx2 1 0>;
+ wakeup;
+
+ s5m8767_osc: clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s5m8767_ap",
+ "s5m8767_cp", "s5m8767_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VALIVE_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VM1M2_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VCC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "UNUSED_LDO5";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <0>; /* Always OFF */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VMPLL_1.1V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VPLL_1.1V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VMIPI_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "UNUSED_LDO9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <0>; /* Always OFF */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VMIPI_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VABB1_1.95V_AP";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VUOTG_3.0V_AP";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "UNUSED_LDO13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <0>; /* Always OFF */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VABB02_1.95V_AP";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VHSIC_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VHSIC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_AP_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "CAM_AF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD_MOT_2.7V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <2700000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VCC_3.3V_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "CAM_SENSOR_A2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VCC_1.8V_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1075000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VMEM_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "UNUSED_BUCK6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <0>; /* Always OFF */
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ op_mode = <3>; /* Standby Mode */
+ };
+ };
+ };
+
+ s5m8767_rtc@ {
+ compatible = "samsung,s5m8767-rtc";
+ };
+ };
+
+ spi_0: spi@...20000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ status = "okay";
+
+ ymu831: ymu831-spi {
+ compatible = "yamaha,ymu831";
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <4 0>;
+ reg = <0x0>;
+ codec-en-gpios = <&gpx3 6 0>;
+ controller-data {
+ cs-gpio = <&gpb 1 0>;
+ samsung,spi-feedback-delay = <2>;
+ };
+ };
+ };
+
+ spi_1: spi@...30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ status = "okay";
+ spi-cpha;
+
+ shub_spi: shub {
+ compatible = "samsung,ssp-spi";
+ spi-max-frequency = <5000000>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <2 0>;
+ ap-mcu-int = <&gpx0 0 0>;
+ mcu-ap-int1 = <&gpx0 2 0>;
+ mcu-ap-int2 = <&gpx0 4 0>;
+ mcu-reset = <&gpx0 5 0>;
+ reg = <0>;
+ controller-data {
+ cs-gpio = <&gpb 5 0>;
+ samsung,spi-feedback-dealy = <0>;
+ };
+ };
+ };
+
+ mipi_lcd: mipi_panel {
+ compatible = "samsung,s6e63j0x03";
+ lcd-panel-name = "s6e63j0x03";
+ reset-gpio = <&gpf2 1 0>; /* mux function : output */
+ te-gpio = <&gpx0 6 0>; /* mux function : input */
+ det-gpio = <&gpx1 7 0>; /* mux function : input */
+ reset-delay = <5>;
+ power-on-delay = <30>;
+ power-off-delay = <120>;
+ was-enabled;
+ vdd3-supply = <&ldo26_reg>;
+ vci-supply = <&ldo22_reg>;
+ samsung,panel-width-mm = <29>;
+ samsung,panel-height-mm = <29>;
+ samsung,panel-frame-freq = <30>; /* Hz */
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing-0 {
+ clock-frequency = <0>;
+ hactive = <320>;
+ vactive = <320>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <1>;
+ vfront-porch = <150>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+
+ cpu-timings {
+ cs_setup = <0>;
+ wr_setup = <0>;
+ wr_act = <1>;
+ wr_hold = <0>;
+ };
+ };
+
+ dsi@...80000 {
+ client = <&mipi_lcd>;
+ source = <&fimd>;
+ vdd11-supply = <&ldo8_reg>;
+ vdd18-supply = <&ldo10_reg>;
+ status = "okay";
+
+ mipi-dsi-config {
+ interface = <0>; /* command mode */
+ pixel_format = <7>; /* RGB 24BPP */
+ auto_flush = <0>;
+ eot_disable = <0>;
+ auto_vertical_cnt = <0>;
+ hse = <0>;
+ hfp = <0>;
+ hbp = <0>;
+ hsa = <0>;
+ no_data_lane = <0>; /* use 1 lane */
+ byte_clk = <0>;
+ burst_mode = <3>;
+ p = <3>; /* p m s : 250Mbps */
+ m = <125>;
+ s = <2>;
+ pll_stable_time = <500>;
+ esc_clk = <20000000>;
+ stop_holding_cnt = <0xf>;
+ bta_timeout = <0xff>;
+ rx_timeout = <0xffff>;
+ virtual_ch = <0>;
+ cmd_allow = <0xf>;
+ };
+ };
+
+ fimd@...00000 {
+ display = <&mipi_lcd>;
+ display-bus = <&dsi_0>;
+ dsi-enable;
+ vidout-i80-ldi0;
+ vidout-pnrmode-rgb;
+ default_win = <3>;
+ gamma-tbl = <0x000C0000 0x005C002C 0x00EC009C 0x01B00148
+ 0x02940228 0x032402E4 0x038C035C 0x03DC03B8
+ 0x000003FC 0x00100000 0x00680034 0x00F800A8
+ 0x01C00154 0x02980230 0x032802E8 0x03900360
+ 0x03DC03B8 0x000003FC 0x00100000 0x00680034
+ 0x00F800A8 0x01C00154 0x02980230 0x032802E8
+ 0x03900360 0x03DC03B8 0x000003FC 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x00000000>;
+ status = "okay";
+ };
+
+ gpu@...00000 {
+ status = "okay";
+ clock-names = "pll", "mux1", "mux2", "sclk", "block", "g3d";
+ clocks = <&clock 17>, <&clock 392>, <&clock 394>,
+ <&clock 172>, <&clock 483>, <&clock 276>;
+ vdd_g3d-supply = <&buck4_reg>;
+ control-regulator;
+ dvfs {
+ step@0 {
+ rate = <80000000>;
+ min_uv = <600000>;
+ max_uv = <600000>;
+ downthreshold = <0>;
+ upthreshold = <255>;
+ };
+ step@1 {
+ rate = <80000000>;
+ min_uv = <900000>;
+ max_uv = <900000>;
+ downthreshold = <0>;
+ upthreshold = <255>;
+ };
+ };
+ };
+
+ hsotg@...80000 {
+ status = "okay";
+ vusb_core-supply = <&safeout_reg>;
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ extcon = <&muic>;
+ };
+
+ exynos-usbphy@...B0000 {
+ status = "okay";
+ };
+
+ rfkill-gpio {
+ compatible = "rfkill-gpio";
+ clocks = <&s5m8767_osc 2 /*S2MPS11_CLK_BT*/>;
+ clock-names = "bt_clk32k";
+
+ bt {
+ label = "bluetooth";
+ type = <2>;
+ reset-gpio = <&gpx3 0 0>;
+ shutdown-gpio = <&gpl0 6 0>;
+ wake-gpio = <&gpx3 1 0>;
+ host-wake-gpio = <&gpx2 6 0>;
+ clock = "bt_clk32k";
+ };
+ };
+
+ codec@...00000 {
+ status = "okay";
+ };
+
+ i2s0: i2s@...30000 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+ assigned-clock-parents = <&clock_audss 3 &clock_audss 0>,
+ <&clock_audss 0 &clock 6>;
+ assigned-clock-rates = <&clock_audss 1 96000000>,
+ <&clock_audss 2 96000000>;
+ };
+
+ sound {
+ compatible = "tizenw,ymu831";
+ clocks = <&clock 2>, <&clock 396>, <&clock 21>, <&clock 6>,
+ <&s5m8767_osc 2 /*S2MPS11_CLK_BT*/>;
+ clock-names = "parent", "out-mux", "out", "pll", "clk_32k";
+ /* EPLL */
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&ymu831>;
+ samsung,model = "ymu831";
+ };
+
+ camera {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_port_b_clk_active>;
+
+ fimc_0: fimc@...00000 {
+ clock-frequency = <80000000>;
+ status = "okay";
+ };
+
+ fimc_1: fimc@...10000 {
+ clock-frequency = <80000000>;
+ status = "okay";
+ };
+
+ fimc_2: fimc@...20000 {
+ clock-frequency = <80000000>;
+ status = "okay";
+ };
+
+ fimc_3: fimc@...30000 {
+ clock-frequency = <80000000>;
+ status = "okay";
+ };
+
+ csis_1: csis@...90000 {
+ status = "okay";
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ clock-frequency = <80000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Camera D (4) MIPI CSI-2 (CSIS1) */
+ port@4 {
+ reg = <4>;
+ csis1_ep: endpoint {
+ remote-endpoint = <&is_s5k6a3_ep>;
+ data-lanes = <1>;
+ samsung,csis-hs-settle = <18>;
+ samsung,csis-wclk;
+ };
+ };
+ };
+
+ fimc-is@...00000 {
+ samsung,aclk-frequency = <80000000>;
+ samsung,aclk-axi-frequency = <80000000>;
+ samsung,mcuisp-frequency = <400000000>;
+ status = "okay";
+
+ fimc-isp@...00000 {
+ status = "okay";
+ };
+
+ fimc_lite_1: fimc-lite@...A0000 {
+ status = "okay";
+ };
+
+ i2c1_isp: i2c-isp@...40000 {
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+
+ s5k6a3@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&ldo24_reg>;
+ svddio-supply = <&ldo27_reg>;
+ afvdd-supply = <&ldo19_reg>;
+ gpios = <&gpj1 0 0>;
+ clocks = <&camera 1>; /* CAM_B_CLKOUT */
+ clock-names = "extclk";
+ clock-frequency = <24000000>;
+ port {
+ is_s5k6a3_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ jack {
+ compatible = "samsung,extcon-port";
+ extcon = <&muic>;
+
+ samsung,extcon-online-usb;
+ samsung,extcon-online-charger;
+ };
+
+ tmu@...C0000 {
+ vtmu-supply = <&ldo10_reg>;
+ sampling-interval = <5000>;
+ t0_on = <0x1e0>;
+ t0_off = <0x960>;
+ t1_on = <0x960>;
+ t1_off = <0x30>;
+ status = "okay";
+ };
+
+ exynos-drm {
+ compatible = "samsung,exynos-drm";
+ crtcs = <&fimd>;
+ connectors = <&dsi_0>;
+ };
+};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists