| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1398524543-15012-24-git-send-email-madcatxster@devoid-pointer.net>
Date: Sat, 26 Apr 2014 17:02:22 +0200
From: Michal Malý <madcatxster@...oid-pointer.net>
To: linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: dmitry.torokhov@...il.com, jkosina@...e.cz, elias.vds@...il.com,
anssi.hannula@....fi, simon@...gewell.org,
Michal Malý <madcatxster@...oid-pointer.net>
Subject: [PATCH v4 23/24] hid: Port hid-lg4ff to ff-memless-next
Port hid-lg4ff to ff-memless-next
Signed-off-by: Michal Malý <madcatxster@...oid-pointer.net>
Tested-by: Tested-by: Elias Vanderstuyft <elias.vds@...il.com>
---
drivers/hid/Kconfig | 2 +-
drivers/hid/hid-lg4ff.c | 93 ++++++++++++++++++++++++++++++-------------------
2 files changed, 59 insertions(+), 36 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 5e70519..546ac4a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -399,7 +399,7 @@ config LOGIG940_FF
config LOGIWHEELS_FF
bool "Logitech wheels configuration and force feedback support"
depends on HID_LOGITECH
- select INPUT_FF_MEMLESS
+ select INPUT_FF_MEMLESS_NEXT
default LOGITECH_FF
help
Say Y here if you want to enable force feedback and range setting
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 24883b4..d629093 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -25,6 +25,7 @@
#include <linux/input.h>
+#include <linux/input/ff-memless-next.h>
#include <linux/usb.h>
#include <linux/hid.h>
@@ -45,6 +46,8 @@
#define G27_REV_MIN 0x38
#define G27_2_REV_MIN 0x39
+#define FF_UPDATE_RATE 8
+
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
@@ -69,6 +72,13 @@ struct lg4ff_device_entry {
static const signed short lg4ff_wheel_effects[] = {
FF_CONSTANT,
+ FF_RAMP,
+ FF_PERIODIC,
+ FF_SQUARE,
+ FF_TRIANGLE,
+ FF_SINE,
+ FF_SAW_UP,
+ FF_SAW_DOWN,
FF_AUTOCENTER,
-1
};
@@ -184,47 +194,60 @@ int lg4ff_adjust_input_event(struct hid_device *hid, struct hid_field *field,
}
}
-static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+static int hid_lg4ff_start_combined(struct hid_device *hid, struct hid_report *report,
+ const struct mlnx_simple_force *force)
+{
+ __s32 *value = report->field[0]->value;
+ int scaled_x;
+
+ /* Scale down from MLNX range */
+ scaled_x = 0x80 - (force->x * 0xff / 0xffff);
+
+ value[0] = 0x11; /* Slot 1 */
+ value[1] = 0x08;
+ value[2] = scaled_x;
+ value[3] = 0x80;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_stop_combined(struct hid_device *hid, struct hid_report *report)
+{
+ __s32 *value = report->field[0]->value;
+
+ value[0] = 0x13; /* Slot 1 */
+ value[1] = 0x00;
+ value[2] = 0x00;
+ value[3] = 0x00;
+ value[4] = 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+
+ hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ return 0;
+}
+
+static int hid_lg4ff_control(struct input_dev *dev, void *data, const struct mlnx_effect_command *command)
{
struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
- __s32 *value = report->field[0]->value;
- int x;
-
-#define CLAMP(x) do { if (x < 0) x = 0; else if (x > 0xff) x = 0xff; } while (0)
-
- switch (effect->type) {
- case FF_CONSTANT:
- x = effect->u.ramp.start_level + 0x80; /* 0x80 is no force */
- CLAMP(x);
-
- if (x == 0x80) {
- /* De-activate force in slot-1*/
- value[0] = 0x13;
- value[1] = 0x00;
- value[2] = 0x00;
- value[3] = 0x00;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
-
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
- return 0;
- }
-
- value[0] = 0x11; /* Slot 1 */
- value[1] = 0x08;
- value[2] = x;
- value[3] = 0x80;
- value[4] = 0x00;
- value[5] = 0x00;
- value[6] = 0x00;
- hid_hw_request(hid, report, HID_REQ_SET_REPORT);
+ switch (command->cmd) {
+ case MLNX_START_COMBINED:
+ return hid_lg4ff_start_combined(hid, report, &command->u.simple_force);
+ break;
+ case MLNX_STOP_COMBINED:
+ return hid_lg4ff_stop_combined(hid, report);
break;
+ default:
+ dbg_hid("Unsupported effect command");
+ return -EINVAL;
}
- return 0;
}
/* Sends default autocentering command compatible with
@@ -610,7 +633,7 @@ int lg4ff_init(struct hid_device *hid)
for (j = 0; lg4ff_devices[i].ff_effects[j] >= 0; j++)
set_bit(lg4ff_devices[i].ff_effects[j], dev->ffbit);
- error = input_ff_create_memless(dev, NULL, hid_lg4ff_play);
+ error = input_ff_create_mlnx(dev, (void *)NULL, hid_lg4ff_control, FF_UPDATE_RATE);
if (error)
return error;
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists