| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <535E4120.5020203@samsung.com>
Date: Mon, 28 Apr 2014 13:53:04 +0200
From: Jacek Anaszewski <j.anaszewski@...sung.com>
To: Bryan Wu <cooloney@...il.com>
Cc: milo kim <milo.kim@...com>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
Linux LED Subsystem <linux-leds@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Andrzej Hajda <a.hajda@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Richard Purdie <rpurdie@...ys.net>,
Sakari Ailus <sakari.ailus@....fi>
Subject: Re: [PATCH/RFC v3 1/5] leds: Add sysfs and kernel internal API for
flash LEDs
Hi Bryan,
Thanks for the review.
On 04/26/2014 01:17 AM, Bryan Wu wrote:
> On Fri, Apr 11, 2014 at 7:56 AM, Jacek Anaszewski
> <j.anaszewski@...sung.com> wrote:
>> Some LED devices support two operation modes - torch and
>> flash.
>
> Do we have a method to look up the capabilities from LED devices driver?
> For example, the LED device supports Torch/Flash then LED device
> driver should set a flag like LED_DEV_CAP_TORCH or LED_DEV_CAP_FLASH.
> If it doesn't support those functions, it won't set those flags.
It is assumed that torch led is always available. For declaring
the existence of the flash led there is 'has_flash_led' flag in the
struct led_flash.
> LED Flash class core can check those flags for further usage.
>
>> This patch provides support for flash LED devices
>> in the LED subsystem by introducing new sysfs attributes
>> and kernel internal interface. The attributes being
>> introduced are: flash_brightness, flash_strobe, flash_timeout,
>> max_flash_timeout, max_flash_brightness, flash_fault and
>> optional external_strobe, indicator_brightness and
>> max_indicator_btightness. All the flash related features
>
> typo here, it should max_indicator_btightness -> max_indicator_brightness
>
>> are placed in a separate module.
>
> Please add one empty line here.
>
>> The modifications aim to be compatible with V4L2 framework
>> requirements related to the flash devices management. The
>> design assumes that V4L2 sub-device can take of the LED class
>> device control and communicate with it through the kernel
>> internal interface. When V4L2 Flash sub-device file is
>> opened, the LED class device sysfs interface is made
>> unavailable.
>>
>
> I don't quite understand the last sentence here. Looks like the LED
> flash class interface binds to V4L2 Flash sub-device, then why we need
> to export sysfs for user space if the only user is V4L2 which can talk
> through kernel internal API here.
It has been agreed that the two types of interfaces should be available
for the users for operating on LED flash devices. Currently on open
the V4L2 flash sub-device sets the lock flag to disable LED sysfs
interface which was exported when the LED device was created.
Do you suggest that attributes should be removed each time V4L2
takes control of the LED flash device and re-created after
the device is released?
>> Signed-off-by: Jacek Anaszewski <j.anaszewski@...sung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
>> Cc: Bryan Wu <cooloney@...il.com>
>> Cc: Richard Purdie <rpurdie@...ys.net>
>> ---
>> drivers/leds/Kconfig | 8 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/led-class.c | 36 ++-
>> drivers/leds/led-flash.c | 627
> +++++++++++++++++++++++++++++++++++++++++++
>
> If we go for the LED Flash class, I prefer to use led-class-flash.c
> rather than led-flash.c
OK.
>> drivers/leds/led-triggers.c | 16 +-
>> drivers/leds/leds.h | 6 +
>> include/linux/leds.h | 50 +++-
>> include/linux/leds_flash.h | 252 +++++++++++++++++
>
> leds_flash.h -> led-class-flash.h
>
>> 8 files changed, 982 insertions(+), 14 deletions(-)
>> create mode 100644 drivers/leds/led-flash.c
>> create mode 100644 include/linux/leds_flash.h
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 2062682..1e1c81f 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -19,6 +19,14 @@ config LEDS_CLASS
>> This option enables the led sysfs class in /sys/class/leds. You'll
>> need this to do anything useful with LEDs. If unsure, say N.
>>
>> +config LEDS_CLASS_FLASH
>> + tristate "Flash LEDs Support"
> "LED Flash Class Support"
>
>> + depends on LEDS_CLASS
>> + help
>> + This option enables support for flash LED devices. Say Y if you
>> + want to use flash specific features of a LED device, if they
>> + are supported.
>> +
>
> This help message is not very accurate, please take a look at
> LEDS_CLASS. And I prefer this driver can be a module, so it should be
> mentioned here.
Doesn't 'tristate' property suffice for indicating that the driver
can be a module?
>> comment "LED drivers"
>>
>> config LEDS_88PM860X
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 3cd76db..8861b86 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -2,6 +2,7 @@
>> # LED Core
>> obj-$(CONFIG_NEW_LEDS) += led-core.o
>> obj-$(CONFIG_LEDS_CLASS) += led-class.o
>> +obj-$(CONFIG_LEDS_CLASS_FLASH) += led-flash.o
>> obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
>>
>> # LED Platform Drivers
>> diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
>> index f37d63c..58f16c3 100644
>> --- a/drivers/leds/led-class.c
>> +++ b/drivers/leds/led-class.c
>> @@ -9,15 +9,16 @@
>> * published by the Free Software Foundation.
>> */
>>
>> -#include <linux/module.h>
>> -#include <linux/kernel.h>
>> +#include <linux/ctype.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> #include <linux/init.h>
>> +#include <linux/kernel.h>
>> #include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> #include <linux/spinlock.h>
>> -#include <linux/device.h>
>> #include <linux/timer.h>
>> -#include <linux/err.h>
>> -#include <linux/ctype.h>
>> #include <linux/leds.h>
>> #include "leds.h"
>>
>
> I believe this change is kind of cleanup, could you please split them
> out? For this patch we just need add those LED Flash class related
> code.
Sure.
>
>> @@ -45,28 +46,38 @@ static ssize_t brightness_store(struct device *dev,
>> {
>> struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> unsigned long state;
>> - ssize_t ret = -EINVAL;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>>
>> ret = kstrtoul(buf, 10, &state);
>> if (ret)
>> - return ret;
>> + goto unlock;
>>
>> if (state == LED_OFF)
>> led_trigger_remove(led_cdev);
>> __led_set_brightness(led_cdev, state);
>> + ret = size;
>>
>> - return size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>
> Is this change related to some bug or race condition? I failed to find
> any comments about that. Or we need to split it out for further
> discussion.
This modification is required for locking the sysfs interface
when V4L2 flash sub-device is opened.
>> }
>> static DEVICE_ATTR_RW(brightness);
>>
>> -static ssize_t led_max_brightness_show(struct device *dev,
>> +static ssize_t max_brightness_show(struct device *dev,
>> struct device_attribute *attr, char *buf)
>> {
>> struct led_classdev *led_cdev = dev_get_drvdata(dev);
>>
>> return sprintf(buf, "%u\n", led_cdev->max_brightness);
>> }
>> -static DEVICE_ATTR(max_brightness, 0444, led_max_brightness_show, NULL);
>> +static DEVICE_ATTR_RO(max_brightness);
>>
>
> This is cosmetics patch, please split it out.
OK.
>> #ifdef CONFIG_LEDS_TRIGGERS
>> static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
>> @@ -174,6 +185,8 @@ EXPORT_SYMBOL_GPL(led_classdev_suspend);
>> void led_classdev_resume(struct led_classdev *led_cdev)
>> {
>> led_cdev->brightness_set(led_cdev, led_cdev->brightness);
>> + if (led_cdev->flash_resume)
>> + led_cdev->flash_resume(led_cdev);
>> led_cdev->flags &= ~LED_SUSPENDED;
>> }
>> EXPORT_SYMBOL_GPL(led_classdev_resume);
>> @@ -218,6 +231,7 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
>> #ifdef CONFIG_LEDS_TRIGGERS
>> init_rwsem(&led_cdev->trigger_lock);
>> #endif
>> + mutex_init(&led_cdev->led_lock);
>> /* add to the list of leds */
>> down_write(&leds_list_lock);
>> list_add_tail(&led_cdev->node, &leds_list);
>> @@ -271,6 +285,8 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
>> down_write(&leds_list_lock);
>> list_del(&led_cdev->node);
>> up_write(&leds_list_lock);
>> +
>> + mutex_destroy(&led_cdev->led_lock);
>> }
>> EXPORT_SYMBOL_GPL(led_classdev_unregister);
>>
>> diff --git a/drivers/leds/led-flash.c b/drivers/leds/led-flash.c
>> new file mode 100644
>> index 0000000..9d482a4
>> --- /dev/null
>> +++ b/drivers/leds/led-flash.c
>> @@ -0,0 +1,627 @@
>> +/*
>> + * LED Class Flash interface
>
> Is LED Class Flash or LED Flash Class? Please make them consistent.
>
>> + *
>> + * Copyright (C) 2014 Samsung Electronics Co., Ltd.
>> + * Author: Jacek Anaszewski <j.anaszewski@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/leds.h>
>> +#include <linux/leds_flash.h>
>> +#include "leds.h"
>> +
>> +static ssize_t flash_brightness_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t size)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned long state;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + ret = kstrtoul(buf, 10, &state);
>> + if (ret)
>> + goto unlock;
>> +
>> + ret = led_set_flash_brightness(led_cdev, state);
>> + if (ret < 0)
>> + goto unlock;
>> +
>> + ret = size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> +}
>> +
>> +static ssize_t flash_brightness_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + /* no lock needed for this */
>> + led_update_flash_brightness(led_cdev);
>> +
>> + return sprintf(buf, "%u\n", flash->brightness.val);
>> +}
>> +static DEVICE_ATTR_RW(flash_brightness);
>> +
>> +static ssize_t max_flash_brightness_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + return sprintf(buf, "%u\n", flash->brightness.max);
>> +}
>> +static DEVICE_ATTR_RO(max_flash_brightness);
>> +
>> +static ssize_t indicator_brightness_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t size)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned long state;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + ret = kstrtoul(buf, 10, &state);
>> + if (ret)
>> + goto unlock;
>> +
>> + ret = led_set_indicator_brightness(led_cdev, state);
>> + if (ret < 0)
>> + goto unlock;
>> +
>> + ret = size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> +}
>> +
>> +static ssize_t indicator_brightness_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + /* no lock needed for this */
>> + led_update_indicator_brightness(led_cdev);
>> +
>> + return sprintf(buf, "%u\n", flash->indicator_brightness->val);
>> +}
>> +static DEVICE_ATTR_RW(indicator_brightness);
>> +
>> +static ssize_t max_indicator_brightness_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + return sprintf(buf, "%u\n", flash->indicator_brightness->max);
>> +}
>> +static DEVICE_ATTR_RO(max_indicator_brightness);
>> +
>> +static ssize_t flash_strobe_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t size)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned long state;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + ret = kstrtoul(buf, 10, &state);
>> + if (ret)
>> + goto unlock;
>> +
>> + if (state < 0 || state > 1)
>> + return -EINVAL;
>> +
>> + ret = led_set_flash_strobe(led_cdev, state);
>> + if (ret < 0)
>> + goto unlock;
>> + ret = size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> +}
>> +
>> +static ssize_t flash_strobe_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + /* no lock needed for this */
>> + ret = led_get_flash_strobe(led_cdev);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return sprintf(buf, "%u\n", ret);
>> +}
>> +static DEVICE_ATTR_RW(flash_strobe);
>> +
>> +static ssize_t flash_timeout_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t size)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned long flash_timeout;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + ret = kstrtoul(buf, 10, &flash_timeout);
>> + if (ret)
>> + goto unlock;
>> +
>> + ret = led_set_flash_timeout(led_cdev, flash_timeout);
>> + if (ret < 0)
>> + goto unlock;
>> +
>> + ret = size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> +}
>> +
>> +static ssize_t flash_timeout_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + return sprintf(buf, "%d\n", flash->timeout.val);
>> +}
>> +static DEVICE_ATTR_RW(flash_timeout);
>> +
>> +static ssize_t max_flash_timeout_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + return sprintf(buf, "%d\n", flash->timeout.max);
>> +}
>> +static DEVICE_ATTR_RO(max_flash_timeout);
>> +
>> +static ssize_t flash_fault_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned int fault;
>> + int ret;
>> +
>> + ret = led_get_flash_fault(led_cdev, &fault);
>> + if (ret < 0)
>> + return -EINVAL;
>> +
>> + return sprintf(buf, "0x%8.8x\n", fault);
>> +}
>> +static DEVICE_ATTR_RO(flash_fault);
>> +
>> +static ssize_t external_strobe_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t size)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> + unsigned long external_strobe;
>> + ssize_t ret;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + ret = kstrtoul(buf, 10, &external_strobe);
>> + if (ret)
>> + goto unlock;
>> +
>> + if (external_strobe > 1) {
>> + ret = -EINVAL;
>> + goto unlock;
>> + }
>> +
>> + ret = led_set_external_strobe(led_cdev, external_strobe);
>> + if (ret < 0)
>> + goto unlock;
>> + ret = size;
>> +unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> +}
>> +
>> +static ssize_t external_strobe_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> +
>> + return sprintf(buf, "%u\n", led_cdev->flash->external_strobe);
>> +}
>> +static DEVICE_ATTR_RW(external_strobe);
>> +
>> +static struct attribute *led_flash_attrs[] = {
>> + &dev_attr_flash_brightness.attr,
>> + &dev_attr_flash_strobe.attr,
>> + &dev_attr_flash_timeout.attr,
>> + &dev_attr_max_flash_timeout.attr,
>> + &dev_attr_max_flash_brightness.attr,
>> + &dev_attr_flash_fault.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *led_flash_indicator_attrs[] = {
>> + &dev_attr_indicator_brightness.attr,
>> + &dev_attr_max_indicator_brightness.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute *led_flash_external_strobe_attrs[] = {
>> + &dev_attr_external_strobe.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute_group led_flash_group = {
>> + .attrs = led_flash_attrs,
>> +};
>> +
>> +static struct attribute_group led_flash_indicator_group = {
>> + .attrs = led_flash_indicator_attrs,
>> +};
>> +
>> +static struct attribute_group led_flash_external_strobe_group = {
>> + .attrs = led_flash_external_strobe_attrs,
>> +};
>> +
>> +void led_flash_resume(struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> +
>> + call_flash_op(brightness_set, led_cdev,
>> + flash->brightness.val);
>> + call_flash_op(timeout_set, led_cdev,
>> + flash->timeout.val);
>> + if (has_flash_op(indicator_brightness_set))
>> + call_flash_op(indicator_brightness_set, led_cdev,
>> + flash->indicator_brightness->val);
>> +}
>> +
>> +#ifdef CONFIG_V4L2_FLASH
>> +static const struct v4l2_flash_ops v4l2_flash_ops = {
>> + .brightness_set = led_set_brightness,
>> + .brightness_update = led_update_brightness,
>> + .flash_brightness_set = led_set_flash_brightness,
>> + .flash_brightness_update = led_update_flash_brightness,
>> + .indicator_brightness_set = led_set_indicator_brightness,
>> + .indicator_brightness_update = led_update_indicator_brightness,
>> + .strobe_set = led_set_flash_strobe,
>> + .strobe_get = led_get_flash_strobe,
>> + .timeout_set = led_set_flash_timeout,
>> + .external_strobe_set = led_set_external_strobe,
>> + .fault_get = led_get_flash_fault,
>> + .sysfs_lock = led_sysfs_lock,
>> + .sysfs_unlock = led_sysfs_unlock,
>> +};
>> +#define V4L2_FLASH_OPS (&v4l2_flash_ops)
>> +#else
>> +#define V4L2_FLASH_OPS NULL
>> +#endif
>> +
>
> This struct can be moved to V4L2 flash driver.
I'm affraid not if we want to let this driver to be built as a module.
In such case v4l2-flash driver doesn't see led_flash's symbols
and build break occurs.
>
>> +
>> +void led_flash_remove_sysfs_groups(struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + int i;
>> +
>> + for (i = 0; i < LED_FLASH_MAX_SYSFS_GROUPS; ++i)
>> + if (flash->sysfs_groups[i])
>> + sysfs_remove_group(&led_cdev->dev->kobj,
>> + flash->sysfs_groups[i]);
>> +}
>> +
>> +int led_flash_create_sysfs_groups(struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + int ret, num_sysfs_groups = 0;
>> +
>> + memset(flash->sysfs_groups, 0, sizeof(*flash->sysfs_groups) *
>> + LED_FLASH_MAX_SYSFS_GROUPS);
>> +
>> + ret = sysfs_create_group(&led_cdev->dev->kobj, &led_flash_group);
>> + if (ret < 0)
>> + goto err_create_group;
>> + flash->sysfs_groups[num_sysfs_groups++] = &led_flash_group;
>> +
>> + if (flash->indicator_brightness) {
>> + ret = sysfs_create_group(&led_cdev->dev->kobj,
>> + &led_flash_indicator_group);
>> + if (ret < 0)
>> + goto err_create_group;
>> + flash->sysfs_groups[num_sysfs_groups++] =
>> + &led_flash_indicator_group;
>> + }
>> + if (flash->has_external_strobe) {
>> + ret = sysfs_create_group(&led_cdev->dev->kobj,
>> + &led_flash_external_strobe_group);
>> + if (ret < 0)
>> + goto err_create_group;
>> + flash->sysfs_groups[num_sysfs_groups++] =
>> + &led_flash_external_strobe_group;
>> + }
>> +
>> + return 0;
>> +
>> +err_create_group:
>> + led_flash_remove_sysfs_groups(led_cdev);
>> + return ret;
>> +}
>> +
>> +int led_classdev_flash_register(struct device *parent,
>> + struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + const struct led_flash_ops *ops;
>> + int ret;
>> +
>> + if (!flash)
>> + return -EINVAL;
>> +
>> + /* Register led class device */
>> + ret = led_classdev_register(parent, led_cdev);
>> + if (ret < 0)
>> + return ret;
>> +
>
> I think this should be after following ops checks, then you don't need
> to do unregister when checks fail.
It is here to allow for registering only torch led if this is
only one declared by the LED flash class driver.
>> + if (!flash->has_flash_led)
>> + goto exit;
>
> This looks a little bit strange to me.
> We check a flag of normal led_cdev firstly like
> led_cdev->flags & LED_DEV_CAP_FLASH or LED_DEV_CAP_TORTH,
> Then check led_cdev->flash struct.
>
> If you already have struct flash, has_flash_led is redundant to me.
In this implementation having struct flash doesn't imply presence
of a flash led. But this function will be modified in the new version
of the patchset.
>> +
>> + /* Validate flash related ops */
>> + ops = &flash->ops;
>> + if (!ops || !ops->brightness_set || !ops->strobe_set || !ops->strobe_get
>> + || !ops->timeout_set || !ops->fault_get)
>> + return -EINVAL;
>> +
>> + if (flash->has_external_strobe && !ops->external_strobe_set)
>> + return -EINVAL;
>> +
>> + if (flash->indicator_brightness && !ops->indicator_brightness_set)
>> + return -EINVAL;
>> +
>> + /* Install resume callback for flash controls */
>> + led_cdev->flash_resume = led_flash_resume;
>> +
>> + /* Create flash led specific sysfs attributes */
>> + ret = led_flash_create_sysfs_groups(led_cdev);
>> + if (ret < 0)
>> + goto err_create_groups;
>
> I'd like to see these sysfs interfaces are documented, please add them
> to Documentation/leds/
Sure, I've already sent modifications to the Documentation/leds
in my two previous patch series, but postponed updating
it in this version until I submit proposal for flash manager
which will provide a way for dynamic association of flash
led devices and camera sensors.
>> +
>> +exit:
>> + /* This will create V4L2 Flash sub-device if it is enabled */
>> + ret = v4l2_flash_init(led_cdev, V4L2_FLASH_OPS);
>> + if (ret < 0)
>> + goto err_create_groups;
>> +
>> + return 0;
>> +
>
> I don't think this is the right place to call v4l2_flash_init() API.
> It should be called during LED Flash device driver probing.
> max77693_led_probe() calls led_classdev_flash_register() then calls
> v4l2_flash_init()
>
> We should keep the core code separated, calling this in LED Flash
> Class API is not a good idea. Let's say if there's another subsystem
> also want to use LED Flash Class API but it doesn't want to init V4L2
> flash interface, it doesn't need to call v4l2_flash_init().
This was the way I did it in my RFC v1, I'll bring it back.
>> +err_create_groups:
>> + led_classdev_unregister(led_cdev);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(led_classdev_flash_register);
>> +
>> +void led_classdev_flash_unregister(struct led_classdev *led_cdev)
>> +{
>> + v4l2_flash_release(led_cdev);
> Move out this also.
>
>> + led_flash_remove_sysfs_groups(led_cdev);
>> + led_classdev_unregister(led_cdev);
>> +}
>> +EXPORT_SYMBOL_GPL(led_classdev_flash_unregister);
>> +
>> +/* Caller must ensure led_cdev->led_lock held */
>> +void led_sysfs_lock(struct led_classdev *led_cdev)
>> +{
>> + led_cdev->flags |= LED_SYSFS_LOCK;
>> +}
>> +EXPORT_SYMBOL(led_sysfs_lock);
>> +
>> +/* Caller must ensure led_cdev->led_lock held */
>> +void led_sysfs_unlock(struct led_classdev *led_cdev)
>> +{
>> + led_cdev->flags &= ~LED_SYSFS_LOCK;
>> +}
>> +EXPORT_SYMBOL(led_sysfs_unlock);
>> +
>> +int led_set_flash_strobe(struct led_classdev *led_cdev, bool state)
>> +{
>> + if (!has_flash_op(strobe_set))
>> + return -EINVAL;
>> +
>> + return call_flash_op(strobe_set, led_cdev, state);
>> +}
>> +EXPORT_SYMBOL(led_set_flash_strobe);
>> +
>> +int led_get_flash_strobe(struct led_classdev *led_cdev)
>> +{
>> + if (!has_flash_op(strobe_get))
>> + return -EINVAL;
>> +
>> + return call_flash_op(strobe_get, led_cdev);
>> +}
>> +EXPORT_SYMBOL(led_get_flash_strobe);
>> +
>> +void led_clamp_align_val(struct led_ctrl *c)
>> +{
>> + u32 v, offset;
>> +
>> + v = c->val + c->step / 2;
>> + v = clamp(v, c->min, c->max);
>> + offset = v - c->min;
>> + offset = c->step * (offset / c->step);
>> + c->val = c->min + offset;
>> +}
>> +
>> +int led_set_flash_timeout(struct led_classdev *led_cdev, u32 timeout)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + struct led_ctrl *c = &flash->timeout;
>> + int ret = 0;
>> +
>> + if (!has_flash_op(timeout_set))
>> + return -EINVAL;
>> +
>> + c->val = timeout;
>> + led_clamp_align_val(c);
>> +
>> + if (!(led_cdev->flags & LED_SUSPENDED))
>> + ret = call_flash_op(timeout_set, led_cdev, c->val);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(led_set_flash_timeout);
>> +
>> +int led_get_flash_fault(struct led_classdev *led_cdev, u32 *fault)
>> +{
>> + if (!has_flash_op(fault_get))
>> + return -EINVAL;
>> +
>> + return call_flash_op(fault_get, led_cdev, fault);
>> +}
>> +EXPORT_SYMBOL(led_get_flash_fault);
>> +
>> +int led_set_external_strobe(struct led_classdev *led_cdev, bool enable)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + int ret;
>> +
>> + if (!has_flash_op(external_strobe_set))
>> + return -EINVAL;
>> +
>> + if (flash->has_external_strobe) {
>> + ret = call_flash_op(external_strobe_set, led_cdev, enable);
>> + if (ret < 0)
>> + return -EINVAL;
>> + flash->external_strobe = enable;
>> + } else if (enable)
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(led_set_external_strobe);
>> +
>> +int led_set_flash_brightness(struct led_classdev *led_cdev,
>> + u32 brightness)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + struct led_ctrl *c = &flash->brightness;
>> + int ret = 0;
>> +
>> + if (!has_flash_op(brightness_set))
>> + return -EINVAL;
>> +
>> + c->val = brightness;
>> + led_clamp_align_val(c);
>> +
>> + if (!(led_cdev->flags & LED_SUSPENDED))
>> + ret = call_flash_op(brightness_set, led_cdev, c->val);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(led_set_flash_brightness);
>> +
>> +int led_update_flash_brightness(struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + struct led_ctrl *c = &flash->brightness;
>> + u32 brightness;
>> + int ret = 0;
>> +
>> + if (has_flash_op(brightness_get)) {
>> + ret = call_flash_op(brightness_get, led_cdev, &brightness);
>> + if (ret < 0)
>> + return ret;
>> + c->val = brightness;
>> + }
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(led_update_flash_brightness);
>> +
>> +int led_set_indicator_brightness(struct led_classdev *led_cdev,
>> + u32 brightness)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + struct led_ctrl *c = flash->indicator_brightness;
>> + int ret = 0;
>> +
>> + if (!has_flash_op(indicator_brightness_set))
>> + return -EINVAL;
>> +
>> + c->val = brightness;
>> + led_clamp_align_val(c);
>> +
>> + if (!(led_cdev->flags & LED_SUSPENDED))
>> + ret = call_flash_op(indicator_brightness_set, led_cdev, c->val);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(led_set_indicator_brightness);
>> +
>> +int led_update_indicator_brightness(struct led_classdev *led_cdev)
>> +{
>> + struct led_flash *flash = led_cdev->flash;
>> + struct led_ctrl *c = flash->indicator_brightness;
>> + u32 brightness;
>> + int ret = 0;
>> +
>> + if (has_flash_op(indicator_brightness_get)) {
>> + ret = call_flash_op(indicator_brightness_get, led_cdev,
>> + &brightness);
>> + if (ret < 0)
>> + return ret;
>> + c->val = brightness;
>> + }
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(led_update_indicator_brightness);
>> +
>> +static int __init leds_flash_init(void)
>> +{
>> + return 0;
>> +}
>> +
>> +static void __exit leds_flash_exit(void)
>> +{
>> +}
>> +
>> +subsys_initcall(leds_flash_init);
>> +module_exit(leds_flash_exit);
>
> I don't think we need these empty functions here. Looks it useless to me.
Yes, it's my ommission.
>> +
>> +MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@...sung.com>");
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("LED Class Flash Interface");
>> diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
>> index df1a7c1..40e21c0 100644
>> --- a/drivers/leds/led-triggers.c
>> +++ b/drivers/leds/led-triggers.c
>> @@ -37,6 +37,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
>> char trigger_name[TRIG_NAME_MAX];
>> struct led_trigger *trig;
>> size_t len;
>> + int ret = count;
>> +
>> + mutex_lock(&led_cdev->led_lock);
>> +
>> + if (led_sysfs_is_locked(led_cdev)) {
>> + ret = -EBUSY;
>> + goto exit_unlock;
>> + }
>>
>> trigger_name[sizeof(trigger_name) - 1] = '\0';
>> strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
>> @@ -47,7 +55,7 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
>>
>> if (!strcmp(trigger_name, "none")) {
>> led_trigger_remove(led_cdev);
>> - return count;
>> + goto exit_unlock;
>> }
>>
>> down_read(&triggers_list_lock);
>> @@ -58,12 +66,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
>> up_write(&led_cdev->trigger_lock);
>>
>> up_read(&triggers_list_lock);
>> - return count;
>> + goto exit_unlock;
>> }
>> }
>> up_read(&triggers_list_lock);
>>
>> - return -EINVAL;
>> +exit_unlock:
>> + mutex_unlock(&led_cdev->led_lock);
>> + return ret;
>> }
>> EXPORT_SYMBOL_GPL(led_trigger_store);
>>
>> diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
>> index 4c50365..f66a0c3 100644
>> --- a/drivers/leds/leds.h
>> +++ b/drivers/leds/leds.h
>> @@ -17,6 +17,12 @@
>> #include <linux/rwsem.h>
>> #include <linux/leds.h>
>>
>> +#define call_flash_op(op, args...) \
>> + ((led_cdev)->flash->ops.op(args))
>> +
>> +#define has_flash_op(op) \
>> + ((led_cdev)->flash && (led_cdev)->flash->ops.op)
>> +
>> static inline void __led_set_brightness(struct led_classdev *led_cdev,
>> enum led_brightness value)
>> {
>> diff --git a/include/linux/leds.h b/include/linux/leds.h
>> index 0287ab2..a794817 100644
>> --- a/include/linux/leds.h
>> +++ b/include/linux/leds.h
>> @@ -13,12 +13,14 @@
>> #define __LINUX_LEDS_H_INCLUDED
>>
>> #include <linux/list.h>
>> -#include <linux/spinlock.h>
>> +#include <linux/mutex.h>
>> #include <linux/rwsem.h>
>> +#include <linux/spinlock.h>
>> #include <linux/timer.h>
>> #include <linux/workqueue.h>
>>
>> struct device;
>> +struct led_flash;
>> /*
>> * LED Core
>> */
>> @@ -29,6 +31,28 @@ enum led_brightness {
>> LED_FULL = 255,
>> };
>>
>> +/*
>> + * This structure is required in two cases:
>> + * - it defines allowed levels of flash leds brightness and timeout
>> + * - it provides initialization data for V4L2 Flash controls
>> + * when CONFIG_V4L2_FLASH is enabled and allows for proper
>> + * enum led_brightness <-> microamperes conversion for the
>> + * V4L2_CID_FLASH_TORCH_INTENSITY
>> + */
>> +struct led_ctrl {
>
> What about moving this to V4L2 flash driver and the name "led_ctrl" is
> not related to val cramp.
>
> In LED subsystem we are using brightness, so it's better do the
> conversion or ctrl in V4L2 and pass the right brightness value to LED
> subsystem.
I defined LED flash class brightness interface in microamperes
under influence of the Sakari Ailus' statement in the message [1],
where he argues that for leds that "generally are used as flash the
current is known, and thus it should also be visible in the interface".
I find this argument reasonable.
>> + /* maximum allowed value */
>> + u32 min;
>> + /* maximum allowed value */
>> + u32 max;
>> + /* step value */
>> + u32 step;
>> + /*
>> + * Default value for V4L2 controls and for flash leds
>> + * it also serves for caching the value currently set.
>> + */
>> + u32 val;
>> +};
>> +
>> struct led_classdev {
>> const char *name;
>> int brightness;
>> @@ -42,6 +66,7 @@ struct led_classdev {
>> #define LED_BLINK_ONESHOT (1 << 17)
>> #define LED_BLINK_ONESHOT_STOP (1 << 18)
>> #define LED_BLINK_INVERT (1 << 19)
>> +#define LED_SYSFS_LOCK (1 << 21)
>>
>> /* Set LED brightness level */
>> /* Must not sleep, use a workqueue if needed */
>> @@ -69,6 +94,17 @@ struct led_classdev {
>> unsigned long blink_delay_on, blink_delay_off;
>> struct timer_list blink_timer;
>> int blink_brightness;
>> + struct led_flash *flash;
>> + void (*flash_resume)(struct led_classdev *led_cdev);
>> +#ifdef CONFIG_V4L2_FLASH
>> + /* Initialization data for the V4L2_CID_FLASH_TORCH_INTENSITY control */
>> + struct led_ctrl brightness_ctrl;
>> +#endif
>
> Move it to V4L2 Flash
It is required here if the flash brightness is to be expressed in
microamperes.
>> + /*
>> + * Ensures consistent LED sysfs access and protects
>> + * LED sysfs locking mechanism
>> + */
>> + struct mutex led_lock;
>>
> I guess we can split it out as a new patch.
>> struct work_struct set_brightness_work;
>> int delayed_set_value;
>> @@ -139,6 +175,18 @@ extern void led_blink_set_oneshot(struct led_classdev *led_cdev,
>> extern void led_set_brightness(struct led_classdev *led_cdev,
>> enum led_brightness brightness);
>>
>> +/**
>> + * led_sysfs_is_locked
>> + * @led_cdev: the LED to query
>> + *
>> + * Returns: true if the sysfs interface of the led is disabled,
>> + * false otherwise
>> + */
>> +static inline bool led_sysfs_is_locked(struct led_classdev *led_cdev)
>> +{
>> + return led_cdev->flags & LED_SYSFS_LOCK;
>> +}
>> +
>
> Why we need this lock check? We just do mutex_lock() which do lock
> check definitely.
The V4L2 flash sub-device may be opened for relatively long time
and hold the lock. I think the better option is to give the user
immediate feedback that the the LED flash device control is currently
taken of by the V4L2.
>> /*
>> * LED Triggers
>> */
>> diff --git a/include/linux/leds_flash.h b/include/linux/leds_flash.h
>> new file mode 100644
>> index 0000000..0f885a0
>> --- /dev/null
>> +++ b/include/linux/leds_flash.h
>> @@ -0,0 +1,252 @@
>> +/*
>> + * Flash leds API
>> + *
>> + * Copyright (C) 2014 Samsung Electronics Co., Ltd.
>> + * Author: Jacek Anaszewski <j.anaszewski@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +#ifndef __LINUX_FLASH_LEDS_H_INCLUDED
>> +#define __LINUX_FLASH_LEDS_H_INCLUDED
>> +
>> +#include <media/v4l2-flash.h>
>> +#include <linux/leds.h>
>> +
>> +/*
>> + * Supported led fault bits - must be kept in synch
>> + * with V4L2_FLASH_FAULT bits.
>> + */
>> +#define LED_FAULT_OVER_VOLTAGE (1 << 0)
>> +#define LED_FAULT_TIMEOUT (1 << 1)
>> +#define LED_FAULT_OVER_TEMPERATURE (1 << 2)
>> +#define LED_FAULT_SHORT_CIRCUIT (1 << 3)
>> +#define LED_FAULT_OVER_CURRENT (1 << 4)
>> +#define LED_FAULT_INDICATOR (1 << 5)
>> +#define LED_FAULT_UNDER_VOLTAGE (1 << 6)
>> +#define LED_FAULT_INPUT_VOLTAGE (1 << 7)
>> +#define LED_FAULT_LED_OVER_TEMPERATURE (1 << 8)
>> +
>
> Probably we can just reuse the predefined V4L2_FLASH_FAULT bits.
> Or V4L2_FLASH_FAULT use LED_FLASH_FAULT bit definitions, but don't
> need to copy and paste.
OK.
>> +#define LED_FLASH_MAX_SYSFS_GROUPS 3
>> +
>> +struct led_flash_ops {
>> + /* set flash brightness */
>> + int (*brightness_set)(struct led_classdev *led_cdev,
>> + u32 brightness);
>> + /* get flash brightness */
>> + int (*brightness_get)(struct led_classdev *led_cdev, u32 *brightness);
>> + /* set flash indicator brightness */
>> + int (*indicator_brightness_set)(struct led_classdev *led_cdev,
>> + u32 brightness);
>> + /* get flash indicator brightness */
>> + int (*indicator_brightness_get)(struct led_classdev *led_cdev,
>> + u32 *brightness);
>> + /* setup flash strobe */
>> + int (*strobe_set)(struct led_classdev *led_cdev,
>> + bool state);
>> + /* get flash strobe state */
>> + int (*strobe_get)(struct led_classdev *led_cdev);
>> + /* setup flash timeout */
>> + int (*timeout_set)(struct led_classdev *led_cdev,
>> + u32 timeout);
>> + /* setup strobing the flash from external source */
>> + int (*external_strobe_set)(struct led_classdev *led_cdev,
>> + bool enable);
>> + /* get the flash LED fault */
>> + int (*fault_get)(struct led_classdev *led_cdev,
>> + u32 *fault);
>> +};
>> +
>> +struct led_flash {
>> + /*
>> + * 1 - add support for both flash and torch leds,
>> + * 0 - handle only torch led
>> + */
>> + bool has_flash_led;
>> + /* flash led specific ops */
>> + const struct led_flash_ops ops;
>> +
>> + /* flash sysfs groups */
>> + struct attribute_group *sysfs_groups[LED_FLASH_MAX_SYSFS_GROUPS];
>> +
>> + /* flash brightness value in microamperes along with its constraints */
>> + struct led_ctrl brightness;
>> +
>> + /* timeout value in microseconds along with its constraints */
>> + struct led_ctrl timeout;
>> +
>> + /*
>> + * Indicator brightness value in microamperes along with
>> + * its constraints - this is an optional control and must
>> + * be allocated by the driver if the device supports privacy
>> + * indicator led.
>> + */
>> + struct led_ctrl *indicator_brightness;
>> +
>> + /*
>> + * determines whether device supports external
>> + * flash strobe sources
>> + */
>> + bool has_external_strobe;
>> +
>> + /*
>> + * If true the device doesn't strobe the flash immediately
>> + * after writing 1 to the flash_strobe file, but waits
>> + * for an external signal.
>> + */
>> + bool external_strobe;
>> +
>> +#ifdef CONFIG_V4L2_FLASH
>> + /* V4L2 Flash sub-device data */
>> + struct v4l2_flash v4l2_flash;
>> +
>> + /* flash fault bits that may be set by the device */
>> + u32 fault_flags;
>> +#endif
>> +
>
> Let's consider move all this V4L2 Flash driver related stuff to V4L2
> and treat LED Flash Class as a base struct and API. V4L2 Flash driver
> can create a struct contains LED Flash struct and wrap the API.
> Anyway, LED subsystem should be not just for V4L2 usage and but
> provide good API for other subsystems using.
Indeed, it will be cleaner.
>> +};
>> +
>> +/**
>> + * led_classdev_flash_register - register a new object of led_classdev class
>> + with support for flash LEDs
>> + * @parent: the device to register
>> + * @led_cdev: the led_classdev structure for this device
>> + *
>> + * Returns: 0 on success, error code on failure.
>> + */
>> +int led_classdev_flash_register(struct device *parent,
>> + struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_classdev_flash_unregister - unregisters an object of led_properties class
>> + with support for flash LEDs
>> + * @led_cdev: the flash led device to unregister
>> + *
>> + * Unregisters a previously registered via led_classdev_flash_register object
>> + */
>> +void led_classdev_flash_unregister(struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_set_flash_strobe - setup flash strobe
>> + * @led_cdev: the flash LED to set strobe on
>> + * @state: 1 - strobe flash, 0 - stop flash strobe
>> + *
>> + * Setup flash strobe - trigger flash strobe
>> + *
>> + * Returns: 0 on success or negative error value on failure
>> + */
>> +extern int led_set_flash_strobe(struct led_classdev *led_cdev, bool state);
>> +
>> +/**
>> + * led_get_flash_strobe - get flash strobe status
>> + * @led_cdev: the LED to query
>> + *
>> + * Check whether the flash is strobing at the moment or not.
>> + *
>> + * Returns: flash strobe status (0 or 1) on success or negative
>> + * error value on failure.
>> + */
>> +extern int led_get_flash_strobe(struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_set_flash_brightness - set flash LED brightness
>> + * @led_cdev: the LED to set
>> + * @brightness: the brightness to set it to
>> + *
>> + * Returns: 0 on success, -EINVAL on failure
>> + *
>> + * Set a flash LED's brightness.
>> + */
>> +extern int led_set_flash_brightness(struct led_classdev *led_cdev,
>> + u32 brightness);
>> +
>> +/**
>> + * led_update_flash_brightness - update flash LED brightness
>> + * @led_cdev: the LED to query
>> + *
>> + * Get a flash LED's current brightness and update led_flash->brightness
>> + * member with the obtained value.
>> + *
>> + * Returns: 0 on success or negative error value on failure
>> + */
>> +extern int led_update_flash_brightness(struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_set_flash_timeout - set flash LED timeout
>> + * @led_cdev: the LED to set
>> + * @timeout: the flash timeout to set it to
>> + *
>> + * Returns: 0 on success, -EINVAL on failure
>> + *
>> + * Set the flash strobe duration. The duration set by the driver
>> + * is returned in the timeout argument and may differ from the
>> + * one that was originally passed.
>> + */
>> +extern int led_set_flash_timeout(struct led_classdev *led_cdev,
>> + u32 timeout);
>> +
>> +/**
>> + * led_get_flash_fault - get the flash LED fault
>> + * @led_cdev: the LED to query
>> + * @fault: bitmask containing flash faults
>> + *
>> + * Returns: 0 on success, -EINVAL on failure
>> + *
>> + * Get the flash LED fault.
>> + */
>> +extern int led_get_flash_fault(struct led_classdev *led_cdev,
>> + u32 *fault);
>> +
>> +/**
>> + * led_set_external_strobe - set the flash LED external_strobe mode
>> + * @led_cdev: the LED to set
>> + * @enable: the state to set it to
>> + *
>> + * Returns: 0 on success, -EINVAL on failure
>> + *
>> + * Enable/disable strobing the flash LED with use of external source
>> + */
>> +extern int led_set_external_strobe(struct led_classdev *led_cdev, bool enable);
>> +
>> +/**
>> + * led_set_indicator_brightness - set indicator LED brightness
>> + * @led_cdev: the LED to set
>> + * @brightness: the brightness to set it to
>> + *
>> + * Returns: 0 on success, -EINVAL on failure
>> + *
>> + * Set a flash LED's brightness.
>> + */
>> +extern int led_set_indicator_brightness(struct led_classdev *led_cdev,
>> + u32 led_brightness);
>> +
>> +/**
>> + * led_update_indicator_brightness - update flash indicator LED brightness
>> + * @led_cdev: the LED to query
>> + *
>> + * Get a flash indicator LED's current brightness and update
>> + * led_flash->indicator_brightness member with the obtained value.
>> + *
>> + * Returns: 0 on success or negative error value on failure
>> + */
>> +extern int led_update_indicator_brightness(struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_sysfs_lock - lock LED sysfs interface
>> + * @led_cdev: the LED to set
>> + *
>> + * Lock the LED's sysfs interface
>> + */
>> +extern void led_sysfs_lock(struct led_classdev *led_cdev);
>> +
>> +/**
>> + * led_sysfs_unlock - unlock LED sysfs interface
>> + * @led_cdev: the LED to set
>> + *
>> + * Unlock the LED's sysfs interface
>> + */
>> +extern void led_sysfs_unlock(struct led_classdev *led_cdev);
>> +
>> +#endif /* __LINUX_FLASH_LEDS_H_INCLUDED */
>> --
>> 1.7.9.5
>>
>
> I don't have big objections to these APIs. But I'd like to invite Milo
> to review this Flash related APIs.
>
> Milo, do you think these Flash APIs are good enough for your LED Flash devices?
>
> Thanks,
> -Bryan
>
Thanks,
Jacek
[1] - http://www.spinics.net/lists/linux-leds/msg01650.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists