linux-kernel - [PATCH 7/7] x86: Add documentation for rd/wr fs/gs base

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1398723161-21968-8-git-send-email-andi@firstfloor.org>
Date:	Mon, 28 Apr 2014 15:12:41 -0700
From:	Andi Kleen <andi@...stfloor.org>
To:	x86@...nel.org
Cc:	linux-kernel@...r.kernel.org, Andi Kleen <ak@...ux.intel.com>
Subject: [PATCH 7/7] x86: Add documentation for rd/wr fs/gs base

From: Andi Kleen <ak@...ux.intel.com>

Signed-off-by: Andi Kleen <ak@...ux.intel.com>
---
 Documentation/x86/fsgs.txt | 73 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/x86/fsgs.txt

diff --git a/Documentation/x86/fsgs.txt b/Documentation/x86/fsgs.txt
new file mode 100644
index 0000000..0a1755f
--- /dev/null
+++ b/Documentation/x86/fsgs.txt
@@ -0,0 +1,73 @@
+
+Using FS and GS prefixes on x86_64-linux
+
+The x86 architecture supports segment prefixes per instruction to add an
+offset to an address.  On 64bit x86, these are mostly nops, except for FS
+and GS.
+
+This offers an efficient way to reference a global pointer.
+
+The compiler has to generate special code to use these base registers,
+or they can be accessed with inline assembler.
+
+	mov %gs:offset,%reg
+	mov %fs:offset,%reg
+
+FS is used to address the thread local segment (TLS), declared using
+__thread.  The compiler the automatically generates the correct prefixes and
+relocations to access these values.
+
+FS is normally managed by the runtime code or the threading library.
+
+GS is freely available, but may need special (compiler or inline assembler)
+code to use.
+
+Traditionally 64bit FS and GS could be set by the arch_prctl system call
+
+	arch_prctl(ARCH_SET_GS, value)
+	arch_prctl(ARCH_SET_FS, value)
+
+[There was also an older method using modify_ldt(), inherited from 32bit,
+but this is not discussed here.]
+
+However using a syscall is problematic for user space threading libraries
+that want to context switch in user space.
+
+Newer Intel CPUs (Ivy Bridge and later) added new instructions to directly
+access these registers quickly from user context
+
+	RDFSBASE %reg	read the FS base	(or _readfsbase_u64)
+	RDGSBASE %reg	read the GS base	(or _readgsbase_u64)
+
+	WRFSBASE %reg	write the FS base	(or _writefsbase_u64)
+	WRGSBASE %reg	write the GS base	(or _writegsbase_u64)
+
+The instructions are supported by the CPU when the "fsgsbase" string is shown in
+/proc/cpuinfo (or directly retrieved through the CPUID instruction).
+The instructions are only available to 64bit binaries.
+
+However the kernel needs to explicitely enable these instructions, as it
+may otherwise not correctly context switch the state. Newer Linux
+kernels enable this. When the kernel did not enable the instruction
+they will fault.
+
+An FSGSBASE enabled kernel can be detected by checking the AT_HWCAP2
+bitmask in the aux vector. When the HWCAP2_FSGSBASE bit is set the
+kernel supports RDFSGSBASE.
+
+	#include <sys/auxv.h>
+	#include <elf.h>
+
+	/* Will be eventually in asm/hwcap.h */
+	#define HWCAP2_FSGSBASE        (1 << 0)
+
+        unsigned val = getauxval(AT_HWCAP2);
+        if (val & HWCAP2_FSGSBASE) {
+                asm("wrgsbase %0" :: "r" (ptr));
+        }
+
+Another requirement is that the FS or GS selector has to be zero
+(is normally true unless changed explicitely)
+
+
+Andi Kleen
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/