lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Tue, 29 Apr 2014 03:22:25 -0500
From:	Chase Southwood <chase.southwood@...il.com>
To:	Hartley Sweeten <HartleyS@...ionengravers.com>
Cc:	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"abbotti@....co.uk" <abbotti@....co.uk>,
	"devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 4/6] staging: comedi: addi_apci_1564: simplify the PCI bar
 reading and don't read the unused bars

Hartley and Ian,

Yes, I had a feeling I should have gone with what was present, but my
desire to follow the documentation I wasn't too familiar with won out
:P

I'll spin a new revision of this patchset ASAP with this changed back
and all of my bad titles (oof...) fixed as well and I'll make sure to
be more careful in the future.

Thanks your all of the assistance and patience,
Chase

On Mon, Apr 28, 2014 at 1:09 PM, Hartley Sweeten
<HartleyS@...ionengravers.com> wrote:
> On Saturday, April 26, 2014 6:37 PM, Chase Southwood wrote:
>> This driver only uses PCI bar 1 (devpriv->i_IobaseAmcc), and PCI bar 2
>> (dev->iobase) doon't bother reading the unused PCI bars.
>>
>> Signed-off-by: Chase Southwood <chase.southwood@...il.com>
>> Cc: Ian Abbott <abbotti@....co.uk>
>> Cc: H Hartley Sweeten <hsweeten@...ionengravers.com>
>> ---
>>
>> Hartley,
>>
>> As far as I can tell from reading the I/O Mapping you sent me, these bar
>> numbers are correct, but it seems a bit odd, so please offer correction
>> if I am interpreting the document incorrectly.
>>
>> Thanks,
>> Chase
>>
>>  drivers/staging/comedi/drivers/addi_apci_1564.c | 11 ++---------
>>  1 file changed, 2 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
>> index fe42f9d..7e42d47 100644
>> --- a/drivers/staging/comedi/drivers/addi_apci_1564.c
>> +++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
>> @@ -65,15 +65,8 @@ static int apci1564_auto_attach(struct comedi_device *dev,
>>       if (ret)
>>               return ret;
>>
>> -     if (this_board->i_IorangeBase1)
>> -             dev->iobase = pci_resource_start(pcidev, 1);
>> -     else
>> -             dev->iobase = pci_resource_start(pcidev, 0);
>> -
>> -     devpriv->iobase = dev->iobase;
>> -     devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
>> -     devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
>> -     devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
>> +     dev->iobase = pci_resource_start(pcidev, 2);
>> +     devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 1);
>>
>>       /* Initialize parameters that can be overridden in EEPROM */
>>       devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
>
> The document I sent you from ADDI-DATA does show that the I/O map revision can
> be determined by reading the "Header EEPROM" at BAR1 + 0x00. This seems to
> verify Ian's comment about earlier versions of the board having a different mapping.
>
> As Ian already mentioned. It's probably best to leave the PCI bar resource mapping
> as it currently is. If anyone reports an issue it can be addressed later.
>
> Regards,
> Hartley
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ